Difference between revisions of "X2Go"

From ArchWiki
Jump to: navigation, search
Line 12: Line 12:
  
 
=== Installation and configuration ===
 
=== Installation and configuration ===
Packages needed from AUR: x2goserver and x2goclient and their
+
On the server:
dependencies, the latter (nxcomp, nxproxy) have to be build first.
+
Install the x2goserver package.  In order to do this, one must build x2goagent first. This is only tricky because x2goagent requires the compiled sources of nxcomp, nxcompext, and nxcompshad to be available to itAfter building each of the dependancies, leave the src directories available and then build the package.  The directories should be assembled as follows:
 
+
x2goagent depends on the compiled sources of nxcomp, nxcompext, and  
+
nxcompshad.  The easiest thing is to leave the src directories alone
+
after building each of the dependancies.  The current x2goagent package
+
creates symbolic links to the dependancy packages.  The directory tree
+
should be laid out as follows:
+
 
  ./nxcomp/src
 
  ./nxcomp/src
 
  ./nxcompext/src
 
  ./nxcompext/src
 
  ./nxcompshad/src  
 
  ./nxcompshad/src  
 
  ./x2goagent (this is the one you build at the moment)
 
  ./x2goagent (this is the one you build at the moment)
 +
 +
x2goagent depends on the  The easiest thing is to leave the src directories alone
 +
after building each of the dependancies.  The current x2goagent package
 +
creates symbolic links to the dependancy packages.  The directory tree
 +
should be laid out as follows:
 +
  
 
If all packages are successfully built, you install the following:<br>
 
If all packages are successfully built, you install the following:<br>

Revision as of 19:23, 27 April 2009

x2go Server and Client

With x2go you can access your desktop using another computer -- that means both LAN and internet connections. The transmmission is done using the ssh protocol, so it is encrypted. By using the free nx libraries from NoMachine, a very acceptable permformance in both speed and responsiveness is archieved. Even an ISDN-connection runs smoothly.

This makes it is possible to connect your laptop to any computer with the environment, applications, and performance of the remote desktop. It is also possible to have a bunch of computers connected to one computer (terminal-server, thin-client).

Clients are available for Linux (Qt4 and Gtk), Windows and Mac. The latter two can be downloaded directly from the x2go homepage.

x2go and Arch Linux

Arch Linux x2go packages are available in the AUR. Currently the server, and the gtk/qt clients are available. The LDAP based usermanagement suite is not yet finished, nor are tools that make x2go more convenient for use in schools and thin client environments. But work is going on.

Installation and configuration

On the server: Install the x2goserver package. In order to do this, one must build x2goagent first. This is only tricky because x2goagent requires the compiled sources of nxcomp, nxcompext, and nxcompshad to be available to it. After building each of the dependancies, leave the src directories available and then build the package. The directories should be assembled as follows:

./nxcomp/src
./nxcompext/src
./nxcompshad/src 
./x2goagent (this is the one you build at the moment)

x2goagent depends on the The easiest thing is to leave the src directories alone after building each of the dependancies. The current x2goagent package creates symbolic links to the dependancy packages. The directory tree should be laid out as follows:


If all packages are successfully built, you install the following:
on the server(ex. your pc at home): x2goserver (plus dependencies)
on the client, e.g. laptop: x2goclient (plus dependencies)

Configuring the Server
Given a working X-server plus Desktop-Environment (e.g. KDE) or window manager, you have to do the following:

a) Install the ssh-daemon using

pacman -Sy openssh
/etc/rc.d/sshd start

If the TCP-wrapper is active (see /etc/hosts.deny or /etc/hosts.allow), you have to include sshd there. To have sshd started at boot time, you also have to put it into the daemeons line in /etc/rc.conf, e.g.

DAEMONS=(... network ... sshd ...)

b) Load the fuse module to let the client access the directory in read and write mode on the server.

modeprobe fuse

To have this module loaded at boot time, you also have to put it into the MODULES line in /etc/rc.conf, e.g.

c) Some users or groups have to get the rights to run a program as root.

pacman -Sy sudo
visudo

An example for an entry in this file for all members of the group users:

%users ALL=(ALL) NOPASSWD: /usr/bin/x2gopgwrapper

d) Initialize the SQL database and start the SQL server

/etc/rc.d/postgresql start

This creates internally used tables of PostgreSQL. Now the x2go database and its tables are created this way:

cd /usr/lib/x2go
./x2gocreatebase.sh

The SQL-server and the x2goserver have to be restarted:

/etc/rc.d/postgresql restart
/etc/rc.d/x2goserver start

If you want to have this services started at boot time,, include them in the DAEMONS line in /etc/rc.conf

DAEMONS=(... network ... sshd ... postgresql ... x2goserver)

Configuration of the Client
Convince yourself that you can open a ssh-session from the client to the server (host).

ssh YourUsername_onServer@yourhost_or_ip

Within the local network this should not be a problem. The way you connect from beyond your network, lets say the internet, to your comuter at home is a question of how your network is build up. This would go beyond the scope of this article. Therefore here only a few items:

  • A port has to be opened at the router resp. gateway which forwards requests to your server, and there especially to the sshd-port (which normally is 22). To prevent a big part of the portscan attacks it is probably better to have 222 as publicly reachable port.
  • To prevent you from having the need to keep your public IP address in mind (especially if this changes dynamically) it is advisable to use a dynamic DNS-Service (DynDNS, DynIP). Many routers are preconfigured to be reachable under a name rather than an IP address.

Enough preliminaries! Now to the x2goclient. Run

x2goclient

This opens the client application. Now you can create several sessions, which then appears on the right side and can be selected by a mouseclick. Each entry consists of your username on the server, hostname and IP and the port for ssh-connection. Furthermore you can define several speed profiles (coming from modem up to LAN) and the desktop environment you want to start remotely.

Easy made mistakes: Do not simply choose the defaults of KDE or Gnome, since the executables startkde or startgnome are usually not in the PATH when logging in using ssh. Use full paths to startkde or startgnome. You can also start openbox or another window manager.

You should be asked for your password for your user at the server now and after login you will see the x2go logo for a short time, and -- voila -- the desktop.

Exchange data between client and server(desktop)

On the x2goclient (e.g. laptop) local directories could be shared. The server will use fuse and sshfs to access this directory and mount it to a subdirectory media of your home directory on the server. This enables you to have access to laptop data on your server or to exchange files. It is also possible to mount these shares automatically at each session start.

To leave a session temorarily

Another special feature of x2go is the possibility of suspending a session. This means you can leave a session on one client and reopen it even from another client at the same point. This can be used to to start a session in the LAN and to reopen it later on a laptop. The session data are stored and administrated in a potges databse on the server in the meanwhile. The state of the sessions is protocolled by a process named x2gocleansessions.

Outlook

At the moment the package consists mainly of the x2goserver and the x2goclient. It is planned to add in near future:

  • LDAP-Integration. This allow the administration of users, sessions and logins using LDAP. This is an interesting feature for schols or companys. For this purpose there are control programs which integrate themselves into the KDE Control Center.
  • The client for the command line. Furtermore the option to use x2goclient as an login screen for thin clients.
  • the possibility to use locale devices (CD, floppy, USB-stick) remotely and transparently.

Questions and problems? You could contact me also directly. GerBra

(Many thanks to Stefan Husmann for translation from archlinux.de wiki)

Links

Screenshot KDE-Session

Screenshot configuration dialog

Project page