From ArchWiki
Revision as of 10:57, 13 March 2012 by Palintropos (talk | contribs) (Better heading structure for ToC)
Jump to: navigation, search

XBMC (formerly "Xbox Media Center") is a free, open source (GPL) multimedia player that originally ran on the first-generation XBox, (not the newer Xbox 360), and now runs on computers running Linux, Mac OS X, Windows, and iOS.

XBMC can be used to play/view the most popular video, audio, and picture formats, and many more lesser-known formats, including:

  • Video - DVD-Video, VCD/SVCD, MPEG-1/2/4, DivX, XviD, Matroska
  • Audio - MP3, AAC.
  • Picture - JPG, GIF, PNG.

These can all be played directly from a CD/DVD, or from the hard-drive. XBMC can also play multimedia from a computer over a local network (LAN), or play media streams directly from the Internet. For more information, see the XBMC FAQ.


Note: These instructions assume you have a working X installation. If you have not done this yet, please consult Beginners_Guide#Graphical_User_Interface.

The stable version of XBMC is available in the community repo:

# pacman -Syu xbmc

The SVN (testing) version of XBMC can be downloaded from the AUR (XBMC-git), e.g. using yaourt:

$ yaourt -Syua xbmc-git
Warning: This is not the recommended way of using XBMC, as svn versions are always on the bleeding edge of development and thus can break sometimes. If you want a stable media center experience, go with the stable releases.

Starting XBMC

First add D-Bus to your DAEMONS Array if you haven't already:

(... dbus ...)

Next, you'll probably want to get ConsoleKit up and running, if you haven't already, and add the following line to your .xinitrc:

exec ck-launch-session xbmc-standalone

Make sure you add your user (or whatever user will run xmbc on your system) to at least groups audio, video, and storage.

$ for x in audio video storage; do sudo gpasswd -a $USER $x; done
Note: If you don't run Sudo, simply run the above command as root.

Autostarting at Boot

Using the above method, xbmc should run every time you start your X server, so auto-starting at boot can be configured just like a Display Manager, with one important difference. If you choose to use the /etc/inittab method, you can skip loading a display manager altogether and autologin XBMC by default. To do this, change your default runlevel to 5 in /etc/inittab as usual:

## Only one of the following two lines can be uncommented!
# Boot to console
# Boot to X11

Note the comment (#) in front of id:3:initdefault: and not id:5:initdefault. Then, comment out all the default display manager lines at the end of the file:

# Example lines for starting a login manager
#x:5:respawn:/usr/bin/xdm -nodaemon
#x:5:respawn:/usr/sbin/gdm -nodaemon
#x:5:respawn:/usr/bin/kdm -nodaemon
#x:5:respawn:/usr/bin/slim >/dev/null 2>&1

Finally, add this line (toward the end of the file, near where the lines you just commented are):

x:5:wait:login -f <YOUR_XBMC_USERNAME> </dev/tty7 &>/dev/tty7
Warning: There is a security risk using this method. This bypasses login authentication and should only be used if you are sure you know what you are doing!

Save your /etc/inittab changes and add the following to your .bash_profile:

[[ $(tty) = "/dev/tty7" ]] && exec startx </dev/null &>/dev/null

You may also add a .hushlogin to your home directory to further suppress login messages:

touch ~/.hushlogin


Using a Remote

As XBMC is geared toward being a remote-controlled media center, if your computer has an IR receiver, you will probably want to set up a remote using LIRC. Once you are sure your remote is working properly (tested with $ irw), add lircd to your DAEMONS Array and you'll be ready to create an Lircmap.xml file for it.

Using your favorite text editor, you'll need to go in and create an XML file at ~/.xbmc/userdata/Lircmap.xml (note the capital 'L'). Lircmap.xml format is as follows:

  <remote device="devicename">