Difference between revisions of "Xen"

From ArchWiki
Jump to: navigation, search
m
Line 1: Line 1:
 
[[Category:Emulators (English)]]
 
[[Category:Emulators (English)]]
 
[[Category:HOWTOs (English)]]
 
[[Category:HOWTOs (English)]]
This document explains how to setup Xen for Arch Linux.
+
This document explains how to setup Xen within Arch Linux.
  
 
==What is Xen?==
 
==What is Xen?==

Revision as of 20:54, 23 June 2010

This document explains how to setup Xen within Arch Linux.

What is Xen?

According to the Xen development team: "The Xen hypervisor, the powerful open source industry standard for virtualization, offers a powerful, efficient, and secure feature set for virtualization of x86, x86_64, IA64, PowerPC, and other CPU architectures. It supports a wide range of guest operating systems including Windows®, Linux®, Solaris®, and various versions of the BSD operating systems."

The Xen hypervisor is a thin layer of software which emulates a computer architecture. It is started by the boot loader and allows several operating systems to run simultaneously on top of it. Once the Xen hypervisor is loaded, it starts the "dom0" (for "domain 0"), or privileged domain, which in our case runs a modified Linux kernel (other possible dom0 operating systems are NetBSD and OpenSolaris). The dom0 kernel in the AUR is currently based on a recent version of Linux kernel 2.6 and there is a more unstable -dev version as well; hardware must, of course, be supported by this kernel to run Xen. Once the dom0 has started, one or more "domU" (unprivileged) domains can be started and controlled from dom0.

Setting up Xen

Installing the necessary packages

Before building xen4, you need to build the required package lib32-glibc-devel from the AUR first.

yaourt -S lib32-glibc-devel

After installing it, create a temporary symlink:

ln -s /opt/lib32/usr/include/gnu/stubs-32.h /usr/include/gnu

The next step is to install xen from the AUR. You can either install xen version 3 or 4 by choosing either the xen or xen4 package. This wiki focuses on xen4, to prevent confusion :)

yaourt -S libxenctrl  ## this is currently missing from the dependencies of xen4 (23.5.2010)
yaourt -S xen4

If you need only the xen-tools, version 4 can be installed by using the xen-hv-tools package.

The next step is to build and install the dom0 kernel. To do so, build the kernel26-xen-dom0 package from the AUR.

yaourt -S kernel26-xen-dom0

Please note: currently the kernel configuration is not yet adapted to 2.6.32 so you have to run through the new parameters of 2.6.32 and agree to use the defaults (or whatever else you may want) - so just press enter each time you are asked. There may also be issues with installing as this overwrites the linux-firmware in /usr/lib/firmware.

..and there you go: the building part has been finished. Now you can configure Grub and boot into the kernel that's just been built.

Configuring GRUB

Grub must be configured so that the Xen hypervisor is booted followed by the dom0 kernel. Add the following entry to /boot/grub/menu.lst:

title Xen with Arch Linux
root (hd0,X)
kernel /xen.gz dom0_mem=524288
module /vmlinuz26-xen-dom0 root=/dev/sdaY ro console=tty0 vga=gfx-1024x768x8
module /kernel26-xen-dom0.img

where X and Y are the appropriate numbers for your disk configuration; and dom0_mem, console, and vga are optional, customizable parameters. Nice little detail: you can use LVM volumes too. So instead of /dev/sdaY you can also fill in /dev/mapper/somelvm. Also, notice that the vga-parameter works a bit differently from usual kernel configuration lines. It has been discussed on the Xen-devel list: [1]

The standard arch kernel can be use to boot the domUs. In order for this to work one must add 'xen-blkfront' to the modules array in /etc/mkinitcpio.conf:

MODULES="... xen-blkfront ..."

So, next step is to reboot into the xen kernel.

Next step: start xend:

# /etc/rc.d/xend start

Allocating a fixed amount of memory is recommended when using xen. Also, if you're running IO intensive guests it might be a good idea to dedicate (pin) a CPU core only for dom0 use. Please see the external XenCommonProblems wiki page section "Can I dedicate a cpu core (or cores) only for dom0?" for more information.

Configuring GRUB2

This works just like with Grub, but here you need to use the command 'multiboot' instead of using 'kernel'. So it becomes:

# (2) Arch Linux(XEN)
menuentry "Arch Linux(XEN)" {
    set root=(hd0,X)
    multiboot /boot/xen.gz dom0_mem=2048M
    module /boot/vmlinuz26-xen-dom0 root=/dev/sdaY ro
    module /boot/kernel26-xen-dom0.gz

If you had success when booting up into the dom0 kernel, we can continue.

Add domU instances

The basic idea behind adding a domU is as follows. We must get the domU kernels, allocate space for the virtual hard disk, create a configuration file for the domU, and finally start the domU with xm.

$ mkfs.ext4 /dev/sdb1    ## format partition
$ mkdir /tmp/install
$ mount /dev/sdb1 /tmp/install
$ mkdir -p /tmp/install/dev /tmp/install/proc /tmp/install/sys /tmp/install/var/lib/pacman /tmp/install/var/cache/pacman/pkg /tmp/install/var/lib/pacman
$ mount -o bind /dev /tmp/install/dev
$ mount -t proc none /tmp/install/proc
$ mount -o bind /sys /tmp/install/sys
$ pacman -Sy -r /tmp/install --cachedir /tmp/install/var/cache/pacman/pkg -b /tmp/install/var/lib/pacman base
$ cp -r /etc/pacman* /tmp/install/etc
$ chroot /tmp/install /bin/bash
$ vi /etc/resolv.conf
$ vi /etc/fstab
    /dev/xvda               /           ext4    defaults                0       1

$ vi /etc/inittab
    c1:2345:respawn:/sbin/agetty -8 38400 hvc0 linux
    #c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux
    #c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux
    #c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux
    #c4:2345:respawn:/sbin/agetty -8 38400 tty4 linux
    #c5:2345:respawn:/sbin/agetty -8 38400 tty5 linux
    #c6:2345:respawn:/sbin/agetty -8 38400 tty6 linux


$ exit  ## exit chroot
$ umount /tmp/install/dev
$ umount /tmp/install/proc
$ umount /tmp/install/sys
$ umount /tmp/install

If not starting from a fresh install and one wants to rsync from an existing system:

$ mkfs.ext4 /dev/sdb1    ## format lv partition
$ mkdir /tmp/install
$ mount /dev/sdb1 /tmp/install
$ mkdir /tmp/install/{proc,sys}
$ chmod 555 /tmp/install/proc
$ rsync -avzH --delete --exclude=proc/ --exclude=sys/ old_ooga:/ /tmp/install/

$ vi /etc/xen/dom01     ## create config file
    #  -*- mode: python; -*-
    kernel = "/boot/vmlinuz26"
    ramdisk = "/boot/kernel26.img"
    memory = 1024
    name = "dom01"
    vif = [ 'mac=00:16:3e:00:01:01' ]
    disk = [ 'phy:/dev/sdb1,xvda,w' ]
    dhcp="dhcp"
    hostname = "ooga"
    root = "/dev/xvda ro"

$ xm create -c dom01

Alternative method

To set up Xen by hand, see Xen_Install. This page is marked for deletion because it's very old, so be careful. It details installing a custom xen kernel and the xen userland tools by hand, rather than by taking advantage of packages in the AUR, as described above. Perhaps someone can write an up to date howto in this page instead, so that we can delete the other article.

Arch as Xen guest (PV mode)

To get paravirtualization you need to install:

Change mode to PV with commands (on dom0):

 xe vm-param-set uuid=<vm uuid> HVM-boot-policy=""
 xe vm-param-set uuid=<vm uuid> PV-bootloader=pygrub

Edit /boot/grub/menu.lst and add kernel26-xen:

 # (1) Arch Linux (domU)
 title  Arch Linux (domU)
 root   (hd0,0)
 kernel /boot/vmlinuz26-xen root=/dev/xvda1 ro console=hvc0
 initrd /boot/kernel26-xen.img

xe-guest-utilities

To use xe-guest-utilities, add xenfs mount point into /etc/fstab:

 xenfs                  /proc/xen     xenfs     defaults            0      0

and add xe-linux-distribution into /etc/rc.conf:DAEMONS array.

Notes

  • pygrub does not show boot menu.
  • To avoid hwclock error messages, set HARDWARECLOCK="xen" in /etc/rc.conf (actually you can use any value here except "UTC" and "localtime")
  • If you want to return to hardware VM, set HVM-boot-policy="BIOS order"

Xen management tools

You can use following tools: virt-manager

Packages

As there are quite some packages available in AUR and you can have a pretty hard time figuring out what is needed here a small collection of most of the (intersting) xen packages (last updated: 23.5.2010)

Hypervisor (dom0)

 Needed to compile xen4: libxenctrl
  • Userspace tools of Xen4 (conflicting with xen4): xen-hv-tools
  • Userspace tools of Xen3: xen
  • Some (debian) scripts for disk creation, etc: xen-tools

Guest (domU)

Monitoring

?? (something similar like xsconsole for xenserver available?)

Unknown

Unrelated packages

(e.g. for XenServer/Xen Cloud Platform)

Resources

  • Xen's homepage: [2]
  • The Xen Wiki: [3]
  • Xen kernel patches: [4]