From ArchWiki
Revision as of 14:55, 31 December 2013 by Chazza (Talk | contribs) (Replacing the native window manager: prettify link)

Jump to: navigation, search

From Xfce - About:

Xfce embodies the traditional UNIX philosophy of modularity and re-usability. It consists of a number of components that provide the full functionality one can expect of a modern desktop environment. They are packaged separately and you can pick among the available packages to create the optimal personal working environment.

Xfce is a lightweight and modular Desktop Environment currently based upon GTK+ 2 though in the future it may be ported to GTK+ 3. Xfce contains a suite of applications such as a window manager, a file manager, and a panel to provide a complete user experience. Xfce is popular with many users, partly because it is lightweight but also because a large amount of settings are exposed in a GUI. This is in sharp contrast to desktops such as GNOME Shell which hide many settings from the user.



Xfce can be installed from the xfce4 group which is available in the official repositories. It is highly recommended that you install the xfce4-goodies group as well which includes extra plugins and a number of useful utilities such as the mousepad editor.

Users are also advised to install the gamin package, a file and directory monitoring service, which allows Xfce to detect alterations to files. Please consult the Gamin wiki page for more information.

Starting Xfce

Graphical login

Simply choose Xfce session from the menu in you favourite display manager.

Virtual console

There are two methods to start Xfce manually:

  • Run startxfce4 directly from the console.
  • Configure ~/.xinitrc to exec startxfce4 and then run xinit or startx from the console. See xinitrc for details.
Note: The proper command for launching Xfce is startxfce4, do not start xfce4-session directly.
Tip: You can have Xfce started automatically at login by following Start X at Login.


Xfconf settings

Xfconf is XFCE's system for storing configuration options, and most XFCE configuration is done by editing settings in Xfconf (one way or another). There are several ways to modify these settings:

  • The most obvious and easiest way is to go to "Settings" in the main menu and select the category you want to customize. However, not all customization options are available this way.
  • A less user-friendly but more general way is to go to
    Main menu -> Settings -> Settings Editor
    where you can see and modify all the customization options. Any settings modified here will take effect immediately. The Settings Editor can also be launched from the command line by invoking xfce4-settings-editor.
  • Customization can be done completely from the command line using the program xfconf-query. See the XFCE online documentation for more information and examples and the rest of this wiki page for more examples. Settings changed here will take effect immediately.
  • The settings are stored in XML files in ~/.config/xfce4/xfconf/xfce-perchannel-xml/ which can be edited by hand. However, changes made here will not take effect immediately.
  • For more information: Xfconf documentation

Graphical Settings Manager Commands

There is no official documentation for the commands executed. One must look at .desktop files /usr/share/applications/ folder. For the people who like to know exactly what is happening, here is a handy list to save the effort:

orage -p

To review all the available setting manager commands run the following in a terminal:

$ grep '^Exec=' /usr/share/applications/xfce*settings* | sed -e 's_^.*=_ _'


Menu applet replacement

Whisker Menu is a full-featured replacement for the default Xfce menu applet. Add it to your panel and optionally remove the built-in default menu.

It is available in the AUR as the xfce4-whiskermenu-pluginAUR package.

Removing entries from the System menu

Method 1

With the built-in menu editor, you cannot remove menu entries from the System menu. Here’s how to hide them:

  1. Open Terminal (Xfce menu > System > Terminal) and go to the /usr/share/applications folder:
    $ cd /usr/share/applications
  2. This folder should be full of .desktop files. To see a list type:
    $ ls
  3. Add NoDisplay=true to the .desktop file. For example, if you want to hide Firefox, type in the terminal:
    # echo "NoDisplay=true" >> firefox.desktop
    This command appends the text NoDisplay=true to the end of the .desktop file.
Method 2

Another method is to copy the entire contents of the global applications directory over to your local applications directory, and then proceed to modify and/or disable unwanted .desktop entries. This will survive application updates that overwrite changes under /usr/share/applications/.

  1. In a terminal, copy everything from /usr/share/applications to ~/.local/share/applications/:
    $ cp /usr/share/applications/* ~/.local/share/applications/
  2. For any entry you wish to hide from the menu, add the NoDisplay=true option:
    $ echo "NoDisplay=true" >> ~/.local/share/applications/foo.desktop

You can also edit the application's category by editing the .desktop file with a text editor and modifying the Categories= line.

Method 3

The third method is the cleanest and recommended in the Xfce wiki.

Create the file ~/.config/menus/xfce-applications.menu and copy the following in it:

<!DOCTYPE Menu PUBLIC "-//freedesktop//DTD Menu 1.0//EN"

    <MergeFile type="parent">/etc/xdg/menus/xfce-applications.menu</MergeFile>




        <Merge type="all"/>




The <MergeFile> tag includes the default Xfce menu in our file. This is important.

The <Exclude> tag excludes applications which we do not want to appear in the menu. Here we excluded some Xfce default shortcuts, but you can exclude firefox.desktop or any other application.

The <Layout> tag defines the layout of the menu. The applications can be organized in folders or however we wish. For more details see the aforementioned Xfce wiki page.

Method 4

Alternatively a tool called xame can be used. XAME is a GUI tool written in Gambas designed specifically for editing menu entires in Xfce, it will NOT work in other DEs. XAME is available in the xameAUR package from the AUR. An alternative to XAME that works quite well with Xfce is menulibreAUR.

Missing applications

When some applications are installed (for example via WINE), they may not be listed in /usr/share/applications. Shortcuts might be found in the category “Other” in this directory: ~/.local/share/applications/wine/.


Transparent Background for Icon Titles

To change the default white background of desktop icon titles to something more suitable, create or edit the GTK config file:

style "xfdesktop-icon-view" {
    XfdesktopIconView::label-alpha = 10
    base[NORMAL] = "#000000"
    base[SELECTED] = "#71B9FF"
    base[ACTIVE] = "#71B9FF"
    fg[NORMAL] = "#fcfcfc"
    fg[SELECTED] = "#ffffff"
    fg[ACTIVE] = "#ffffff"
widget_class "*XfdesktopIconView*" style "xfdesktop-icon-view"

Hide Selected Partitions

If you wish to prevent certain partitions or drives appearing on the desktop, you can create a udev rule, for example /etc/udev/rules.d/10-local.rules:


Would show all partitions with the exception of sda1 and sda2 on your desktop. Notice, if you are using udisk2 the above will not work, due to the UDISKS_PRESENTATION_HIDE no longer being supported, instead you must use UDISKS_IGNORE as follows


Remove Thunar Options from Right-click

xfconf-query -c xfce4-desktop -v --create -p /desktop-icons/style -t int -s 0

Kill Window Shortcut

Xfce does not support the kill window shortcut directly, but you can add one with a simple script. Ensure you have the xorg-xkill package installed.

Create a script in ~/.config/xfce4/killwindow.sh with this content and make it executable (you can use chmod 755 killwindow.sh).

xkill -id "`xprop -root -notype | sed -n '/^_NET_ACTIVE_WINDOW/ s/^.*# *\|\,.*$//g p'`"

Now associate a shortcut using Settings -> Keyboard to that script.

Manage Keyboard Shortcuts

Keyboard shortcuts can be managed with the Xfce Settings Manager application, which is available through the xfce4-settings package and the xfce4 group. The Settings Manager can be started from the application menu (click Settings -> Keyboard) or command line (run xfce4-keyboard-settings). The Xfce Docs include detailed instructions for using the Settings Manager.

Window Manager

Enabling the Compositor

Xfce comes with a builtin compositor adding the option for fancy window effects, shadows and transparency and so on. It can be enabled in the Window Manager Tweaks and works on the fly. No additional settings are needed in your /etc/xorg.conf. To enable and adjust settings, go to:

Menu  -->  Settings  -->  Window Manager Tweaks
Tip: The built-in compositor for Xfwm (the Xfce window manager) often causes video tearing in applications. If you wish for a lightweight compositor with some minimal effects, consider using Compton.

Window roll-up

Double clicking on the titlebar or clicking on the window menu and choosing 'role window up' will cause the window's contents to disappear leaving only the titlebar. If you would like to disable this functionality you can do so graphically using the xconf editor or through the command line, as shown below, which achieves the same result.

xfconf-query -c xfwm4 -p /general/mousewheel_rollup -s false

Toggle Automatic Tiling of Windows at Edge of Screen

XFWM4 has the ability to "tile" a window automatically when it is moved to the edge of the screen by resizing it to fill the top half of the screen. (The official XFCE website says this feature is disabled by default in XFCE 4.10, but it seems to be enabled by default on Arch Linux.) This behavior can be enabled or disabled in Window Manager Tweaks --> Accessibility --> Automatically tile windows when moving toward the screen edge, or:

xfconf-query -c xfwm4 -p /general/tile_on_move -s false  # To disable
xfconf-query -c xfwm4 -p /general/tile_on_move -s true   # To enable

Replacing the native window manager

To replace xfwm4 with another Window Manager you can use the syntax 'name of window manager' '--replace' in a terminal.

For example:

  • For Openbox the command is: openbox --replace
  • For Metacity the command is: metacity --replace

To restore the native window manager again , first cancel the command by pressing CTRL and c, and then enter the following command:

$ xfwm4 --replace

Once the other window manager has taken over you can simply save the session. The Save session for future logins option is available in the logout... dialog box. It is also important to note that where restoring xfwm4 during a session, the Save session for future logins option will have to be enabled on that occasion to make this change permanent. Not doing so may result in Openbox being restored again, as the previous saved session may be loaded instead. However, once xfwm4 has been restored, from the next session onwards there will no longer be any need to save future sessions.

As an alternative you can add the window manager to the autostart list in Xfce. To do this, from the main menu, first select Settings Manager, and then session and startup. Once the application window opens, select the Application Autostart tab to show all autostarted applications and programs, and click the Add button to bring up the Add Application window.

The following details can be entered for each field:

  • Name: openbox-wm
  • Description: openbox-wm
  • Command: openbox --replace
  • The name and description fields are unimportant and are just there to indicate what the entry does. The command section has the same syntax as earlier e.g. 'Name of window manager' '--replace' as shown in the entries above.
  • Compiz may require command different from the ones shown as there are several different ways to start it. For more information please consult the Compiz article.

Once complete, click OK, ensure that the checkbox next to the openbox-wm entry is ticked, and then restart the session for the change to take place. The benefit of this method is that autostarted applications can be easily enabled and disabled at will via their autostart checkboxes. Consequently, to allow the native window manager - xfwm4 - to take back over, just clear the openbox-wm tickbox and restart the session.

Re-enabling Compositing effects

If you replace xfwm4 with a window manager that does not have a composite manager then you can use a standalone composite manager such as Xcompmgr or Compton.


Custom Startup Applications

Via the Settings Menu

To launch custom applications when Xfce starts up, click the Applications Menu -> Settings -> Settings Manager and then choose the "Session and Startup" option and click the tab "Application Autostart". You will see a list of programs that get launched on startup. To add an entry, click the "Add" button and fill out the form, specifying the path to an executable you want to run.

Startup Script

Alternatively you can use this method, to run a command line script to launch your applications. This includes getting necessary environment variables into the GUI runtime.

  • Copy the file /etc/xdg/xfce4/xinitrc to ~/.config/xfce4/
  • Edit this file. For example, you can add something like this somehwere in the middle:
source $HOME/.bashrc
# start rxvt-unicode server
urxvtd -q -o -f

Lock the screen

To lock an Xfce4 session (through xflock4) one of xscreensaver, gnome-screensaver, slock or xlockmore packages needs to be installed. Xscreensaver is the recommended option. Please consult its wiki page for more information.

User switching

Xfce4 has support for user switching when used with a Display manager that has this functionality - examples being lightdm and gdm. Please consult your display manager's wiki page for more information. When you have a display manager installed and configured correctly you can switch users from the 'action buttons' menu item in the panel.

Manually Modifying XML settings

It may be useful, especially when upgrading, to manually edit .xml files in the ~/.config/xfce4/xfconf/ folder. For application keyboard shortcuts for example, the file is ~/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-keyboard-shortcuts.xml.

Look and Feel

Add themes to XFCE

1. Go to www.xfce-look.org and click "Themes" in the left navbar. Look around for a theme you want and click "Download".

2. Go to the directory where you downloaded the tarball/file and extract it using an archive manager such as file-roller

3. Move the extracted folder to /usr/share/themes (for all users) or ~/.themes (for just you). Inside /usr/share/themes/abc, there is a folder that you create called xfwm4 that will contain whatever files that is included with that theme.

4. Selecting the theme.

  • The GTK+ theme can be changed from:
Menu --> Settings --> Appearance

  • The xfwm4 theme can be changed from:
Menu --> Settings --> Window Manager

Application theme consistency

Applications do not always have a consistent look. There are two possible reasons for this:

1. The application is based upon a toolkit that the current theme does not support. Applications based upon the gtk2 toolkit will need a gtk2 theme whilst applications based upon the gtk3 toolkit will need a gtk3 theme.

2. The theme is out of date.

To achieve a uniform look for all applications it is advisable to use an up to date gtk3 theme such as Adwaita as gtk3 themes have inbuilt support for gtk2 applications. Adwaita can be installed from the gnome-themes-standard package. Applications based upon the Qt toolkit can mimic the current gtk theme using the qtconfig-qt4 dialogue.

For information please consult these wiki pages: GTK+#GTK+ 3.x for gtk3 and Uniform Look for Qt and GTK Applications for qt.


Main article: X11 Cursors

If you have alternative X cursor themes installed, Xfce can find them with:

Menu --> Settings --> Mouse --> Theme


  1. First find and download your desired icon pack. Recommended places to download icons from are Customize.org, Opendesktop.org and Xfce-look.org; the AUR provides several PKGBUILDs for icon packs.
  2. Go to the directory where you downloaded the icon pack and extract it. Example tar -xzf /home/user/downloads/icon-pack.tar.gz.
  3. Move the extracted folder containing the icons to ~/.icons (if only you want to use the icons) or to /usr/share/icons (if you want all users on the system to make use of the icons), and in the lattter case consider creating a PKGBUILD for that.
  4. Optional: run gtk-update-icon-cache -f -t ~/.icons/<theme_name> to update icon cache
  5. Switch your icons by going to:
Menu --> Settings --> Appearance --> Icons

When you have icon theme problems, it is also recommended to install the hicolor-icon-theme package if it was not already installed.


If you find the standard fonts rather thick and or slightly out of focus open Settings>Appearence click on the Fonts tab and under Hinting: change to Full

You could also try using a custom DPI setting.


Configuring xfce4-mixer

xfce4-mixer is the GUI mixer app / panel plugin made by the Xfce team. It is part of the xfce4 group, so you probably already have it installed. Xfce 4.6 uses gstreamer as the backend to control volume, so first you have to make gstreamer cooperate with xfce4-mixer. One or more of the gstreamer plugin packages listed as optional dependencies to xfce4-mixer must be installed. Without one of these required plugins packages, the following error arises when clicking on the mixer panel item.

 GStreamer was unable to detect any sound devices. Some sound system specific GStreamer packages may be missing. 

Which plugins are needed depends on the hardware. Most people should be fine with gstreamer0.10-base-plugins which can be installed from Official Repositories.

If the xfce4-mixer panel item was already running before one of the plugins packages was installed, logout and login to see if it worked, or just remove the mixer plugin from the panel and add it again. If that does not work, you might need more or different gstreamer plugins. Try to install package gstreamer0.10-good-plugins or gstreamer0.10-bad-plugins.

If you had to change the soundcard in the audio mixer, then you should log out and back in to hear sound.

For further details, for example how to set the default sound card, see Advanced Linux Sound Architecture. Alternatively you can use PulseAudio together with pavucontrol.

Xfce4-mixer and OSS4

If you tried the above section to get xfce4-mixer to work and it does not work at all, then you may have to compile gstreamer0.10-good-plugins yourself. Download the PKGBUILD and other files needed from ABS or here, edit the PKGBUILD, add --enable-oss.

 ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var \
   --enable-oss \
   --disable-static --enable-experimental \
   --disable-schemas-install \
   --disable-hal \
   --with-package-name="GStreamer Good Plugins (Archlinux)" \

and then run makepkg -i.

 makepkg -i

Other LINKS: OSS forum

Keyboard Volume Buttons

Go to

Settings --> Keyboard

Click the "Application Shortcuts" tab and add click the "Add" button. Add the following by entering the command, then pressing the corresponding button at the next window:


For the raise volume button:

amixer set Master 5%+

For the lower volume button:

amixer set Master 5%-

For the mute button:

amixer set Master toggle

You can also run these commands to set the above commands to the standard XF86Audio keys:

xfconf-query -c xfce4-keyboard-shortcuts -p /commands/custom/XF86AudioRaiseVolume -n -t string -s "amixer set Master 5%+ unmute"
xfconf-query -c xfce4-keyboard-shortcuts -p /commands/custom/XF86AudioLowerVolume -n -t string -s "amixer set Master 5%- unmute"
xfconf-query -c xfce4-keyboard-shortcuts -p /commands/custom/XF86AudioMute -n -t string -s "amixer set Master toggle"

If amixer set Master toggle does not work, try the PCM channel (amixer set PCM toggle) instead.

The channel must have a "mute" option for the toggle command to work. To check whether or not your Master channel supports toggling mute, run alsamixer in a terminal and look for the double M's (MM) under the Master channel. If they are not present, then it does not support the mute option. If, for example, you had to change the toggle button to use the PCM channel, make sure to also set the PCM channel as the Mixer Track under Xfce Mixer properties.


Use one of these scripts: http://www.opensound.com/wiki/index.php/Tips_And_Tricks#Using_multimedia_keys_with_OSS

If using ossvol (recommended), add:

ossvol -i 1

for the volume up button

ossvol -d 1

for the volume down button

ossvol -t

for the mute/unmute button


For the raise volume button:

sh -c "pactl set-sink-mute 0 false ; pactl set-sink-volume 0 +1%"

For the lower volume button:

sh -c "pactl set-sink-mute 0 false ; pactl -- set-sink-volume 0 -1%"

For the mute button:

pactl set-sink-mute 0 toggle

These settings assume the device you want to control has index 0. Use pactl list sinks short to list sinks.


xfce4-volumedAUR daemon from the AUR automatically maps volume keys of your keyboard to Xfce-mixer. Additionally you get OSD through Xfce4-notifyd when changing volume. Xfce4-volumed does not need any configuration and is started automatically with Xfce.

Tango-inaccurate.pngThe factual accuracy of this article or section is disputed.Tango-inaccurate.png

Reason: There should be a short explanation of what this does and why it fixes the problem (bug?). (Discuss in Talk:Xfce#)

If you use pulseaudio and xfce4-volumed unmute does not work, try this:

$ xfconf-query -c xfce4-mixer -p /active-card -s `xfconf-query -c xfce4-mixer -p /sound-card`

volumeicon is an alternative to xfce4-volumed in the community repo also handling keybindings and notifications through xfce4-notifyd.

Extra keyboard keys

If you are coming from another distro, you may be interested in enabling extra keys on your keyboard, see Extra Keyboard Keys.

Adding startup/boot sound

Arch does not have a built-in startup sound configuration tool, but there is a workaround by adding the following command to your Application Autostart settings:

aplay /boot/startupsound.wav

The file location and filename can be whatever you want, but naming it descriptively and putting it in /boot keeps things tidy.

Tips & Tricks

xdg-open integration (Preferred Applications)

Most applications rely on xdg-open for opening a preferred application for a given file or URL.

In order for xdg-open and xdg-settings to detect and integrate with the XFCE desktop environment correctly, you need to install the xorg-xprop package.

If you do not do that, your preferred applications preferences (set by exo-preferred-applications) will not be obeyed. Installing the package and allowing xdg-open to detect that you are running XFCE makes it forward all calls to exo-open instead, which correctly uses all your preferred applications preferences.

To make sure xdg-open integration is working correctly, ask xdg-settings for the default web browser and see what the result is:

# xdg-settings get default-web-browser

If it replies with:

xdg-settings: unknown desktop environment

it means that it has failed to detect XFCE as your desktop environment, which is likely due to a missing xorg-xprop package.


XFCE has its own screenshot tool, xfce4-screenshooter. It is part of the xfce4-goodies group.

Print Screen key

Go to:

XFCE Menu  -->  Settings  -->  Keyboard  >>>  Application Shortcuts.

Add the "xfce4-screenshooter -f" command to use the "PrintScreen" key in order to take fullscreen screenshots. See screenshooter's man page for other optional arguments.

Alternatively, an independent screenshot program like scrot can be used.

Disable Terminal F1 and F11 shortcut

The xfce terminal binds F1 and F11 to help and fullscreen, respectively, which can make using programs like htop difficult. To disable those shortcuts, create or edit its configuration file, then log out and log back in. F10 can disabled in the Preferences menu.

(gtk_accel_path "<Actions>/terminal-window/fullscreen" "")
(gtk_accel_path "<Actions>/terminal-window/contents" "")

Terminal color themes or pallets

Terminal color themes or pallets can be changed in GUI under Appearance tab in Preferences. These are the colors that are available to most console applications like Emacs, Vi and so on. Their settings are stored individually for each system user in ~/.config/xfce4/terminal/terminalrc file. There are also so many other themes to choose from. Check forums post [Colour Scheme Screenshots] for hundreds of available choices and themes.

Changing default color theme

XFCE's extra/terminal package comes with a darker color palette. To change this, append the following in your terminalrc file for a lighter color theme, that is always visible in darker Terminal backgrounds.


Terminal tango color theme

To switch to tango color theme, open with your favorite editor


And add(replace) these lines:


Colour management

xfce4-settings-manager does not yet have any colour management / calibration settings, nor is there any specific XFCE program to characterise your monitor.

Loading a profile

If you wish to load an icc profile (that you have previously created or downloaded) to calibrate your display on startup, you can download xcalibAUR from AUR, then open the XFCE4 Settings Manager, click Session and Startup icon, the Autostart tab, and add a new entry where the command is /usr/bin/xcalib /path/to/your/profile.icc. You still need to tell your applications, which display profile should be used to have the displayed images colour managed.

Another option is dispwin. Dispwin not only calibrates the display, but also sets the _ICC_PROFILE atom in X so that some applications can use a "system" display profile instead of requiring the user to set the display profile manually (GIMP, Inkscape, darktable, UFRaw, etc.).

See ICC Profiles#Loading ICC Profiles for more information.

Creating a profile

If you wish to create an icc profile for your display (ie. characterising/profiling, e.g. with the ColorHug, or some other colorimeter, or a spectrophotometer, or "by eye"), the simplest option may be to install dispcalgui from AUR.

Another option is to install gnome-settings-daemon and gnome-color-manager (available in extra). In order to start the calibration from the command line, first do /usr/lib/gnome-settings-daemon/gnome-settings-daemon & (note: this might change your keyboard layout and who knows what else, so probably good to do it on a throwaway account), then colormgr get-devices and look for the "Device ID" line of your monitor. If this is e.g. "xrandr-Lenovo Group Limited", you start calibration with the command gcm-calibrate --device "xrandr-Lenovo Group Limited".

Note: The reason you need gnome-settings-daemon running is because XFCE does not yet have a session component for colord: https://bugzilla.xfce.org/show_bug.cgi?id=8559 . A lightweight daemon, xiccd, may (and probably should) be used instead.

See ICC Profiles for more information.

Multiple Monitors

If you have configured X.org so that your display spans multiple monitors, usually when you login to an XFCE session, it will appear as if your monitors are simple clones of one another. You can use an xrandr tool to tweak your setup but if this is not called at an appropriate time in the startup sequence, some functionality may be lost with parts of your display being inaccessible to the mouse pointer.

A better way is to configure XFCE to match your desired display arrangement. However, at present (xfce-settings 4.10), there is no tool available to assist with configuring multiple monitors directly.

  • The Settings -> Display tool does allow configuration of screen resolution, rotation and enabling individual monitors; warning: using this tool to adjust display settings will reset or lose settings made manually for properties not explicitly offered as buttons in the tool (see below).
  • The Settings -> Settings Editor allows manipulation of all configuration items in particular the displays settings which are saved in the file displays.xml below
  • Alternatively, the displays.xml can be edited using your favourite editor.

The main requirement for multiple monitors is their arrangement relative to one another. This can be controlled by setting the Position properties (X and Y) to suit; an (x,y) position of 0,0 corresponds to the top, left position of the monitor array. This is the default position for all monitors and if several monitors are enabled they will appear as a cloned display area extending from this point.

To extend the display area correctly across both monitors:

  • for side-by-side monitors, set the X property of the rightmost monitor to equal the width of the left-most monitor
  • for above-and-below monitors, set the Y property of the bottom monitor to equal the height of the upper monitor
  • for other arrangements, set the X and Y properties of each monitor to correspond to your layout

Measurements are in pixels. As an example, a pair of monitors with nominal dimensions of 1920x1080 which are rotated by 90 and placed side-by-side can be configured with a displays.xml like this:

<channel name="displays" version="1.0">
 <property name="Default" type="empty">
   <property name="VGA-1" type="string" value="Idek Iiyama 23"">
     <property name="Active" type="bool" value="true"/>
     <property name="Resolution" type="string" value="1920x1080"/>
     <property name="RefreshRate" type="double" value="60.000000"/>
     <property name="Rotation" type="int" value="90"/>
     <property name="Reflection" type="string" value="0"/>
     <property name="Primary" type="bool" value="false"/>
     <property name="Position" type="empty">
       <property name="X" type="int" value="0"/>
       <property name="Y" type="int" value="0"/>
   <property name="DVI-0" type="string" value="Digital display">
     <property name="Active" type="bool" value="true"/>
     <property name="Resolution" type="string" value="1920x1080"/>
     <property name="RefreshRate" type="double" value="60.000000"/>
     <property name="Rotation" type="int" value="90"/>
     <property name="Reflection" type="string" value="0"/>
     <property name="Primary" type="bool" value="false"/>
     <property name="Position" type="empty">
       <property name="X" type="int" value="1080"/>
       <property name="Y" type="int" value="0"/>

Usually, editing settings in this way requires a logout/login to action them.

A new method for configuring multiple monitors will be available in the forthcoming xfce-settings 4.12 release.

XDG User Directories

freedesktop.org specifies the "well known" user directories like the desktop folder and the music folder. See Xdg user directories for detailed info.

SSH Agents

By default Xfce 4.10 will try to load gpg-agent or ssh-agent in that order during session initialization. To disable this, create an xfconf key using the following command:

xfconf-query -c xfce4-session -p /startup/ssh-agent/enabled -n -t bool -s false

To force using ssh-agent even if gpg-agent is installed, run the following instead:

xfconf-query -c xfce4-session -p /startup/ssh-agent/type -n -t string -s ssh-agent

To use GNOME Keyring, simply tick the checkbox Launch GNOME services on startup in the Advanced tab of Session Manager in Xfce's settings. This will also disable gpg-agent and ssh-agent.

Source: http://docs.xfce.org/xfce/xfce4-session/advanced



Power-related ACPI events can be configured using systemd via options from /etc/systemd/logind.conf to give control to xfce4-power-manager.


This also solves the problem when the computer registers multiple suspend events.

xfce4 keeps blanking display

Xfce4 (as of 4.12) does not seem to respect monitor power settings in xfce4-power-manager. It attempts to run the screensaver every 10 minutes. You can check this by reading out the output of $ xset q. Run $ xset s noblank to stop it. Alternatively add the following configuration file to /etc/X11/xorg.conf.d/ ( I would save it as 20-noblank.conf).

Section "ServerFlags"
	Option "BlankTime" "0"


There is a bug in version xfce4-xkb-plugin which causes xfce4-xkb-plugin to lose keyboard, layout switching and compose key settings. As a workaround you may enable Use system defaults option in keyboard settings. To do so run


Go to Layout tab and set the Use system defaults flag, then reconfigure xfce4-xkb-plugin.

Locales ignored with GDM

Add your locale to /var/lib/AccountsService/users/$USER (replace hu_HU.UTF-8 with your own locale):


You may also do it with sed. Note the backslash before .UTF-8:

# sed -i 's/Language=.*/Language=hu_HU\.UTF-8/' /var/lib/AccountsService/users/$USER

Restart GDM to take effect.

Restore default settings

If for any reason you need to revert back to the default settings, try renaming ~/.config/xfce4-session/ and ~/.config/xfce4/

$ mv ~/.config/xfce4-session/ ~/.config/xfce4-session-bak
$ mv ~/.config/xfce4/ ~/.config/xfce4-bak

Logout and login for changes to take effect. If upon logging in you get an error window with the heading "Unable to load a failsafe session," see the Session Failure section on this page.

NVIDIA and xfce4-sensors-plugin

To detect and use sensors of nvidia gpu you need to install libxnvctrlAUR and then recompile xfce4-sensors-plugin package.

Session failure

If the window manager does not load correctly, you maybe got a session error. Typical symptoms of this can include:

  • the mouse is an X and/or does not appear at all
  • window decorations have disappeared and windows cannot be closed
  • "Window Manager" settings tool (xfwm4-settings) will not start, reporting
These settings cannot work with your current window manager (unknown)
  • errors being reported by slim or your login manager like
No window manager registered on screen 0

Restarting xfce or rebooting your system may resolve the problem but more likely the problem is a corrupt session. Delete the session folder below the .cache folder:

$ rm -r ~/.cache/sessions/

Preferred Applications preferences have no effect

If you have set your preferred applications with exo-preferred-applications, but they do not seem to be taken into consideration, see #xdg-open integration (Preferred Applications)

Action Buttons/Missing Icons

This happens if icons for some actions (Suspend, Hibernate) are missing from the icon theme, or at least do not have the expected names. First, find out the currently used icon theme in the Settings Manager (→Appearance→Icons). Match this with a subdirectory of /usr/share/icons. For example, if the icon theme is GNOME, make a note of the directory name /usr/share/icons/gnome.


Make sure that the xfce4-power-manager is installed as this contains the needed icons. Now create symbolic links from the current icon theme into the hicolor icon theme.

ln -s /usr/share/icons/hicolor/16x16/actions/xfpm-suspend.png   ${icontheme}/16x16/actions/system-suspend.png
ln -s /usr/share/icons/hicolor/16x16/actions/xfpm-hibernate.png ${icontheme}/16x16/actions/system-hibernate.png
ln -s /usr/share/icons/hicolor/22x22/actions/xfpm-suspend.png   ${icontheme}/22x22/actions/system-suspend.png
ln -s /usr/share/icons/hicolor/22x22/actions/xfpm-hibernate.png ${icontheme}/22x22/actions/system-hibernate.png
ln -s /usr/share/icons/hicolor/24x24/actions/xfpm-suspend.png   ${icontheme}/24x24/actions/system-suspend.png
ln -s /usr/share/icons/hicolor/24x24/actions/xfpm-hibernate.png ${icontheme}/24x24/actions/system-hibernate.png
ln -s /usr/share/icons/hicolor/48x48/actions/xfpm-suspend.png   ${icontheme}/48x48/actions/system-suspend.png
ln -s /usr/share/icons/hicolor/48x48/actions/xfpm-hibernate.png ${icontheme}/48x48/actions/system-hibernate.png

Log out and in again, and you should see icons for all actions.

Enable cedilla ç/Ç instead of ć/Ć

When you select the keyboard layout "U.S., alternative international" in Settings --> Keyboard --> Layout to enable accents, the typical combination for the cedilla ' + c results in ć instead of ç.To change this suffice edit files gtk.immodules for gtk-2.0 and immodules.cache for gtk-3.0 in line that contains "cedilla" adding both "en" in the list "az:ca:co:fr:gv:oc:pt:sq:tr:wa" but in alphabetical order, staying that way in /etc/gtk-2.0/gtk.immodules

"cedilla" "Cedilla" "gtk20" "/usr/share/locale" "az:ca:co:en:fr:gv:oc:pt:sq:tr:wa"

and this in /usr/lib/gtk-3.0/3.0.0/immodules.cache

"cedilla" "Cedilla" "gtk30" "/usr/share/locale" "az:ca:co:en:fr:gv:oc:pt:sq:tr:wa"

Then, do

# echo "export GTK_IM_MODULE=cedilla" >> /etc/environment

Done. Simply just close and reopen the gtk programs like gedit.

Non ASCII characters when mounting USB sticks

A common problem when automounting USB sticks formatted with fat filesystem is the inability to properly show characters as umlauts, ñ, ß, etc. This may be solved by changing the default iocharset to UTF-8, which is easily done adding a line to /etc/xdg/xfce4/mount.rc:

# FreeBSD specific option

Note that when using utf-8, the system will distinct between upper- and lowercases, potentially corrupting your files, so be careful.

It is possible to mount vfat devices with flush option, so that when copying to USB sticks data flushes more often, thus making thunar's progress bar to stays up until finished. Adding async instead will speed up write ops, but make sure to use Eject option in Thunar to unmount the stick. Globally, mount options for storage devices present at boot can be set in fstab, and for other devices in udev rules.

Video tearing when Xfwm compositing is enabled

This is a known problem. Consider using a standalone compositor like Compton or Xcompmgr. Alternatively, you could replace your window manager with something like Compiz or Kwin (kwin-standalone-gitAUR) which provide their own compositors.

GTK themes not working with multiple monitors

Some configuration tools might corrupt displays.xml, which results in GTK themes under Applications Menu -> Settings -> Appearance ceasing to work. To fix the issue, delete ~/.config/xfce4/xfconf/xfce-perchannel-xml/displays.xml and reconfigure your screens.

See also