Xorg

From ArchWiki
Revision as of 22:08, 11 September 2009 by Markg85 (Talk | contribs)

Jump to: navigation, search

Template:I18n links start Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n links end

Contents

Introduction

Xorg is the public, open-source implementation of the X Window System Version 11. (See the X.org Wikipedia Article or X.org for details.) Basically, if you want a GUI atop Arch, you will want xorg.

Installing Xorg

Before beginning, make sure you do the following:

  1. Make sure that pacman is configured and refreshed.
  2. Make a note about third-party drivers (e.g., nVidia or ATI drivers).

First install the complete 'xorg' group:

# pacman -S xorg

The default 'vesa' driver, though widely compatible with nearly all available chipsets, is merely a fallback (not accelerated and does not support many resolutions). Therefore, a proper video driver should be installed if possible. This command will list all open source video drivers available:

# pacman -Ss xf86-video

Look for the appropriate driver for your card and install it with Template:Codeline.

To discover which card is in your machine, install hwd (Template:Codeline) or community/lshw:

$ hwd -s

or:

$lshw -short

or:

$ lspci | grep "VGA"

Configuring xorg

Before you can run xorg, you need to configure it so that it knows about your graphics card, monitor, mouse and keyboard. There are several methods of automating the process:

Without xorg.conf

The latest Xorg often effectively detects hardware with the help of HAL. Therefore, using an Template:Filename file is optional. It may be advantageous to start with no Template:Filename, and simply add sections as required.

Since xorg depends on hal, install hal if you have not done so:

# pacman -S hal

Add hal to the DAEMONS= array of Template:Filename:

Start hal:

# /etc/rc.d/hal start

Start X:

$ startx

or

$ xinit

If X starts and you want to have a base Template:Filename file, it is now possible to create it from Xorg.0.log file

If it is not detecting proprietary drivers like nvidia, add a minimalistic Template:Filename like the following:

Section "ServerLayout"
   Identifier     "Layout0"
   Screen      0  "Screen0" 0 0
EndSection

Section "Files"
   FontPath "/usr/share/fonts/local/"
EndSection

Section "Device"
   Identifier     "Device0"
   Driver         "nvidia"
   VendorName     "NVIDIA Corporation"
   BoardName      "GeForce Go 7300"
EndSection

Section "Screen"
   Identifier     "Screen0"
   Device         "Device0"
EndSection

Setting non-us keyboard without xorg.conf

# cp /usr/share/hal/fdi/policy/10osvendor/10-keymap.fdi /etc/hal/fdi/policy/

Then open Template:Filename and edit "us" in input.xkb.layout to what you want and, if necessary, edit input.xkb.variant too.

The command

# setxkbmap pl 

(with your keyboard layout instead of pl) executed in X should switch to your keyboard. To make it permanent you can e.g. add this command to Template:Filename file (before starting the window manager).

hwd

Note: hwd has been updated (ver. 5.5) to work with xorg-server-1.5.x and 1.6.x. Currently, it disables HAL-based input device hotplugging and instead generates a traditional Template:Filename including input devices.
Note: hwd has been moved from [community] to the unsupported AUR.

Perhaps the easiest way of getting Xorg up and running quickly is to use hwd, a tool written by users in the Arch Linux community. It's basically a hardware-detection tool that has multiple uses, one of which is setting up an X server. Fortunately, hwd is much more streamlined than xorgconf and doesn't require any input at all.

First, install the hwd package from the AUR.

Then, simply run the following command as root to generate a default Template:Filename file:

# hwd -xa

This will overwrite any existing Template:Filename file with a practical set of defaults, based on what hwd detected for your hardware.

Alternatively, you can generate a sample Xorg config (Template:Filename) without overwriting your existing settings. To do so, run hwd with the Template:Codeline flag instead:

# hwd -x

Sample result:

/etc/X11/xorg.conf.ati
/etc/X11/xorg.conf.vesa

Your sample file(s) ready, rename 'xorg.conf'.
If unsure first try 'vesa' (default).

To use the sample config(s), you must manually rename it. Sample:

# mv /etc/X11/xorg.conf.vesa /etc/X11/xorg.conf

AD: In my experience hwd creates XF86Config-4 file and if there is not Template:Filename present Xorg uses it automatically.

Xorg -configure

You can also use

# Xorg -configure

or

# X -configure

The command automatically generate a default xorg.conf.new file in the current directory. You can check it by:

# X -config ./xorg.conf.new

and copy it as Template:Filename.

nvidia-xconfig

nVidia users can also use

# nvidia-xconfig

when they have official nvidia drivers installed.

Comment the line:

 Load           "type1"

in the Template:Codeline section since recent versions of xorg-server do not include the type1 font module (completely replaced by freetype).

From the Xorg.0.log file

If you managed to start x without any xorg.conf file, you can find the default xorg configuration in Template:Filename. Just copy the text between lines like

(==) --- Start of built-in configuration ---

and

(==) --- End of built-in configuration ---

to your new xorg.conf file.

Editing xorg.conf

You may wish to edit the config after it's been generated. To open in your favourite text-editor, such as Vim (you need root privileges):

# vim /etc/X11/xorg.conf

or use Xorg (xorg-server version < 1.6) Configuration toolkit:

# xorgcfg -textmode

Monitor Settings

Depending on your hardware, Xorg may fail to detect your monitor capabilities correctly, or you may simply wish to use a lower resolution than your monitor is capable of. You might want to look up the following values in your monitor's manual before setting them. The following settings are specified in the Monitor section:

Horizontal Sync

HorizSync 28-64

Refresh Rate

VertRefresh 60

The following are specified in the Screen section:

Color Depth

Depth 24

Resolution

Modes "1280x1024" "1024x768" "800x600"

Multi-monitor setups

The easiest way to achieve a working multi-monitor setup is using xrandr after X starts. First, run (from any account):

xrandr -q

This will list all your available video outputs, with some information about them. Assume your output names are VGA-0, DVI-0 and S-video. Then, to merge screens connected to DVI-0 and VGA-0 outputs, you just need to run:

xrandr --output DVI-0 --right-of VGA-0

If this command works for you, just add it to your xinitrc file.

Keyboard Settings

Xorg may fail to detect your keyboard correctly. This might give problems with your keyboard layout or keyboard model not being set correctly.

To see a full list of keyboard models, layouts, variants and options, open:

/usr/share/X11/xkb/rules/xorg.lst

Input hotplugging with xorg-server 1.5

Normally xorg-server 1.5 tries to configure your keyboard using the new xf86-input-evdev driver (which in turn uses dbus and HAL) instead of using your configuration settings in xorg.conf. This may result in an undesired auto-configured keyboard layout. The fastest workaround is to disable the hotplugging mechanism by adding the following section to your xorg.conf:

Section "ServerFlags"
    Option "AutoAddDevices" "False"
EndSection

Template:Box Note

For more information see Xorg input hotplugging.

Keyboard Layout

Template:Box Note

To change the keyboard layout, use the XkbLayout option in the keyboard InputDevice section. For example, if you have a keyboard with English layout:

Option "XkbLayout" "gb"

To be able to easily switch keyboard layouts, for example between a US and a Swedish layout use this instead:

Option "XkbLayout" "us, se"
Option "XkbOptions" "grp:caps_toggle"

This makes your Caps Lock key switch between the different layouts. This is mainly useful if you don't run a Desktop Environment which takes care of keyboard layouts for you.

Keyboard Model

To change the keyboard model, use the XkbModel option in the keyboard InputDevice section. For example, if you have a Microsoft Wireless Multimedia Keyboard:

Option "XkbModel" "microsoftmult"

Problem with your Apple Keyboard?

More information can be found here.

Display Size/DPI

In order to get correct sizing for fonts, the display size must be set for your desired DPI.

First thing you may try is Xorg autodetection of display size and DPI settings with DDC.

In Template:Filename:

...
Section "Module"
# support for Data Display Channel. Allows to query the monitor capabilities via the video card
Load  "ddc"
# serial bus over which you speak the ddc protocol to get info from the monitor
Load "i2c"
...
Section Screen
...
DefaultColorDepth 24
SubSection "Display"
 Depth     24
 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
...

And do not write any Template:Codeline or Template:Codeline settings. Sometimes it works fine, otherwise you need to set up it manually.

One way to set it up is to pass an argument directly to the X (Xorg) binary. In Template:Filename add the Template:Codeline part as follows:

exec /usr/bin/X -nolisten tcp -dpi 96

Alternatively, going back to the Template:Filename file, in the section Template:Codeline put in your display size in mm:

Section "Monitor"
   ...
 DisplaySize 336 252 # 96 DPI @ 1280x960
   ...
EndSection


The formula for calculating the Template:Codeline values is Width (in inches) x 25.4 / DPI and Height (in inches) x 25.4 / DPI. If you're running Xorg with a resolution of 1024x768 and want a DPI of 96, use 1024 x 25.4 / 96 and 768 x 25.4 / 96. Round numbers down. (xorg expects width/height specifications to be given in milimeters. There are 25.4 milimeters per inch, thus the need to multiply by 25.4)

# calc: (x|y)pixels * 25.4 / dpi
# DisplaySize 168 126 # 96 DPI @ 640x480
# DisplaySize 210 157 # 96 DPI @ 800x600
# DisplaySize 269 201 # 96 DPI @ 1024x768
# DisplaySize 302 227 # 96 DPI @ 1152x864
# DisplaySize 336 252 # 96 DPI @ 1280x960
# DisplaySize 336 210 # 96 DPI @ 1280x800 (non 4:3 aspect)
# DisplaySize 339 271 # 96 DPI @ 1280x1024 (non 4:3 aspect)
# DisplaySize 370 277 # 96 DPI @ 1400x1050
# DisplaySize 380 238 # 96 DPI @ 1440x900 (non 4:3 aspect)
# DisplaySize 420 315 # 96 DPI @ 1600x1200
# DisplaySize 444 277 # 96 DPI @ 1680x1050 (non 4:3 aspect)
# DisplaySize 506 315 # 96 DPI @ 1920x1200 (non 4:3 aspect)


In case X ignores your Template:Codeline setting (known bug) add the following line in the Template:Codeline section.

  Option   "NoDDC" "true"

For nVidia drivers you may have to disable automatic detection of DPI to set it manually. There is also an easier way to set DPI on these cards. Either or both of the following lines can be set in the device section for your nVidia card.

  Option   "UseEdidDpi" "false"
  Option   "DPI" "96 x 96"

If X still ignores your DPI settings, and you have an RandR compliant video driver, you can use

xrandr --dpi 96

to manually set the DPI. You can add that command to your Template:Filename to have the DPI settings applied when you start X manually, and if you are using a display manager, like KDM, you can add it to your display manager's X statup file. For KDM, that would be somewhere like Template:Filename.

Results can be checked by issuing the following command, which should return 96x96 dots per inch if you set DPI @ 96:

$ xdpyinfo | grep -B1 dot

Proprietary Drivers

If you wish to use third-party graphics drivers, do check that the X server runs OK first. Xorg should run smoothly without official drivers, which are typically needed only for advanced features such as 3D-accelerated rendering for games, dual-screen setups, and TV-out. Refer to the NVIDIA and ATI wikis for help with driver installation.

Fonts

There some tips for setting up fonts in Xorg Font Configuration.

Sample Xorg.conf Files

Anyone who has an Xorg.conf file written up that works, go ahead and post a link to it here for others to look at! Please don't inline the entire conf file; upload it somewhere else and link. Thanks!

Running Xorg

This is done simply by typing:

$ startx

or

$ xinit

The default X environment is rather bare, and you will typically seek to install window managers or desktop environments to supplement X.

To test the config file you have created:

$ X -config <your config file>

If a problem occurs, then view the log at Template:Filename. Be on the lookout for any lines beginning with Template:Codeline which represent errors, and also Template:Codeline which are warnings that could indicate other issues.

Please Note: Using startx or xinit requires a Template:Filename file, so that X knows what to run when it starts. Your best option is to copy Template:Filename to your home directory and edit it. Comment out the Template:Codeline lines you don't want, and add or uncomment one for the WM you want to use. If you are using GNOME it is best to start GNOME through gdm to avoid HAL permission problems.

In addition, you can also install twm and xterm (via pacman), which will be used as a fallback if Template:Filename does not exist (as stated in Template:Filename).

X startup (/usr/bin/startx) tweaking

For X's option reference see:

$ man Xserver


The following options have to be appended to the variable Template:Codeline in the Template:Filename file:

  • Prevent X from listening on tcp:
-nolisten tcp
Note: This seems to be the default option now in Template:Filename.


  • Getting rid of the gray weave pattern while X is starting and let X set a black root window:
-br
Note: There seems to be no need for that in recent releases of Xorg.


  • Enable deferred glyph loading for 16 bit fonts:
-deferglyphs 16

Note: If you start X with kdm, the startx script does not seem to be executed. X options must be appended to the variable Template:Codeline or Template:Codeline in the Template:Filename file. By default kdm options are:

  ServerArgsLocal=-nolisten tcp
  ServerCmd=/usr/bin/X

Changes with modular Xorg

Most Common Packages

Make sure you install drivers for mouse, keyboard and videocard. For mouse and keyboard, xf86-input-keyboard and xf86-input-mouse should get installed. Other xf86-input-* packages are available for different input devices.

For the videocard, find out which driver is required and install the right xf86-video-* package. ATI and Nvidia users may wish to install the non-free drivers for their hardware instead (NVIDIA, ATI).

To install all drivers in one run, the xorg-input-drivers and xorg-video-drivers are available.

OpenGL 3D Acceleration

X.Org 7.0 on Arch Linux uses a modular design for mesa, the OpenGL rendering system. Several implementations are available:

  • libgl-dri: Open-source DRI OpenGL implementation. Falls back to software rendering when no DRI driver is installed
  • some other driver providing libGL (ati, nvidia)

When pacman installs an application that needs mesa, it will install one of these packages. To be sure about the right library for your setup, install the library you want prior to installing Xorg. Installing the right package afterwards is also possible, though this gives some dependency errors sometimes, which can be ignored with the -d switch.

Glxgears and Glxinfo

These apps are included in the mesa package.

Changed paths (and configuration)

See this entry for additional upgrade info: http://www.archlinux.org/blog/2006/01/02/how-to-upgrade-xorg/

Modular X.Org 7 installs everything in /usr, where the older versions installed in /usr/X11R6. Several configuration files need updates:

  • Template:Filename
    • Fontpaths live in /usr/share/fonts now
    • RGB database is in /usr/share/X11/rgb
    • Module path is /usr/lib/xorg/modules

Also note that some X configuration tools might stop working. The easiest way to configure X.org is by installing the correct driver packages and running Template:Codeline, which results in a Template:Filename which only needs modification in the resolutions, mouse configuration and keyboard layouts.

Some packages have hard-coded references to /usr/X11R6. These packages need fixing. In the meantime, look what packages install files in /usr/X11R6, uninstall those, make a symlink from /usr to /usr/X11R6 and reinstall the affected packages. Another option is to move the contents of /usr/X11R6 to /usr and make the symlink.

Or you can just add a second module path via:

ModulePath   "/usr/X11R6/lib/modules"

This works e.g. for Nvidia 76.76.

Virtual X session

To start another X session in for example CTRL + ALT + F8 you need to type this on a console:

xinit /path/to/wm -- :1

Change "/path/to/wm" to your window manager start file or to your login manager like gdm, kdm and slim.

Troubleshooting

Blank screen after startx

Check if your user are in hal and dbus group. If not type this command's: gpasswd -a user hal gpasswd -a user dbus And after this startx.

Xorg's Common User Problems

If you are having trouble with xorg, it won't start or the screen is just black, the keyboard and mouse isn't working. Then first take this simple steps:

- did i run any Xorg configure script? ( xorg -Configure )

- did i looked into the log? ( /var/log/Xorg.0.log ) and if you are in irc looking for help paste the log.

pacman -S wgetpaste && wgetpaste /var/log/Xorg.0.log

- did i start hal or dbus ? - keyboard mouse doesn't work??

pacman -S xf86-input-{mouse,keyboard}

- this ATI video card is giving me a headache! Take a look at the ATI wiki, ATI isn't famous for their drivers so if you are considering buying i new pc take a good look at the graphic card.

Xorg "can't see" the resolutions your monitor supports

I found myself in a situation where if I used one of my monitors (a gnr ts902), Xorg would only present me with the options 640x480 and 320x480 which of course was less than I desired. After a lot of research I found through read-edid (in AUR) that part of my EDID was corrupt and so I could only read my HorizSync with read-edid. This fortunately was enough and after adding the right HorizSync line to the xorg.conf's Monitor section (I didn't have to add VertRefresh) I restarted X to see the right resolution :)

note: I'm not sure if

Option "ModeValidation" "NoEdidModes"
Option   "UseEdid" "false"

in Device section of xorg.conf are needed as well; too lazy now to test without them :)

To switch between layouts with Alt+Shift:

Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll"

A Quick Fix for the Bitstream-Vera Conflict

If you see a message that ttf-bitstream-vera conflicts with xorg:

  1. Exit the pacman session by answering no.
  2. Run pacman -Rd xorg
  3. Run pacman -Syu
  4. Run pacman -S xorg
  5. Update your paths in /etc/X11/xorg.conf

A Quick Fix for file conflicts in /usr/include

If you see messages about file conflicts in /usr/include/X11 and /usr/include/GL:

  1. Run rm /usr/include/{GL,X11}
  2. Run pacman -Su

The symlinked directories removed by this operation are replaced by real directories in the new xorg package, causing these file conflicts to appear.

libgl-dri conflicts

(Note below, that nvidia-legacy has been replaced by nvidia-71xx or nvidia-96xx. See here for further details of which driver to use.)

If you get a message similar to:

:: libgl-dri conflicts with nvidia-legacy. Remove nvidia-legacy? [Y/n]

this is due to the multiple OpenGL implementations explained in the OpenGL section above - pacman is attempting to install libgl-dri to satisfy this dependency, but also trying to upgrade your existing video driver, and they conflict. To solve, try:

  • Updating your video driver before a full system update:
# pacman -S nvidia-legacy
# pacman -Syu

Or, if that doesn't work,

  • Remove your existing video driver, do the update, then reinstall your driver:
# pacman -Rd nvidia-legacy
# pacman -Syu
# pacman -S nvidia-legacy
:: nvidia-legacy conflicts with libgl-dri. Remove libgl-dri? [Y/n] Y

Mouse wheel not working

The "Auto" protocol doesn't seem to work properly in Xorg 7 any more. In the InputDevice section for your mouse, change:

Option         "Protocol" "auto"

to

Option         "Protocol" "IMPS/2"

or

Option         "Protocol" "ExplorerPS/2"

If you were using "Auto" to configure your touchpad mouse (and its mouse wheel) you'll have to start using the "synaptics" driver, instead. The mouse wheel will be included on the right-hand area of the touchpad, then.

In 'Section "Module"' add:

Load "synaptics"

In 'Section "InputDevice"' add/change:

Driver "synaptics"
Protocol "auto-dev"

Read man synaptics for more information.

Touchpad mouse taps not working

Previous versions of Xorg 7 allowed you to use the "Auto" protocol to configure your mouse, and tapping was enabled, too. Now you have to specify the driver, and explicitly enable tapping.

In 'Section "Module"' add:

Load "synaptics"

In 'Section "InputDevice"' add/change:

Driver "synaptics"
Protocol "auto-dev"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"

And read man synaptics.

Extra mouse buttons not working

USB Mice users should read Get_All_Mouse_Buttons_Working.

Intellimouse (ExplorerPS/2) users might find their scroll and side buttons aren't behaving as they used to. Previously xorg.conf needed:

Option      "Buttons" "7"
Option      "ZAxisMapping" "6 7"

and users also had to run xmodmap to get the side buttons working with a command like:

xmodmap -e "pointer = 1 2 3 6 7 4 5"

Now xmodmap is no longer required. Instead, make xorg.conf look like this:

Option      "Buttons" "5"
Option      "ZAxisMapping" "4 5"
Option      "ButtonMapping" "1 2 3 6 7"

and the side buttons on a 7-button Intellimouse will work like they used to, without needing to run xmodmap.

Keyboard problems

Problems with switching to tty1

Auto-generated xorg.conf files may cause you problems. If you cannot get to tty1 by holding CTRL-ALT and pressing F1 or cannot get the £ sign for gb people, check to see if the following entries are in your /etc/X11/xorg.conf:

Option "XkbLayout"  "uk"         #"uk" is not a real layout, look in /usr/share/X11/xkb/symbols/ for a list of real ones.
                                 #Try "gb" if you want a UK keyboard layout
Option "XkbRules"   "xfree86"    #this should be "xorg"
Option "XkbVariant" "nodeadkeys" #This line is also known to cause the problems described, try commenting it out.

Some keyboard layouts have changed. I wondered why:

  • I wasn't able to Ctrl+Alt+Fx to switch to console
  • I wasn't able to use layouts

The problem was that the sk_qwerty layout doesn't exist anymore. I had to replace

Option         "XkbLayout" "us,sk_qwerty"

with

Option         "XkbLayout" "us,sk"
Option         "XkbVariant" ",qwerty"

Another thing to look for if your keyboard isn't properly functioning is the XkbRules option:
You'll need to change

Option         "XkbRules" "xfree86"

to

Option         "XkbRules" "xorg"

AltGR (Compose Key) not working properly

If, after the update, you can't use the AltGr key as expected any more, try adding this to your keyboard section:

Option      "XkbOptions" "compose:ralt"

This is not the correct way to activate the AltGr Key on a German keyboard (for example, to use the '|' and '@' keys on German keyboards). Just choose a valid keyboard variant for it to work again, for example (the example is for a German keyboard):

Option      "XkbLayout" "de"
Option      "XkbVariant" "nodeadkeys"

The solutions above don't work on an Italian keyboard. To activate the AltGr key on an Italian keyboard make sure you have the following lines set up properly:

 Driver          "kbd"
 Option          "XkbRules"      "xorg"
 Option          "XkbVariant"    ""

This might still not be enough for a swedish keyboard. Try the above, but with lv3 instead of compose. (Thank you wyvern!) That is:

 Option "XkbLayout" "se"
 Option "XkbVariant" "nodeadkeys"
 Option "XkbOptions" "lv3:ralt_switch"

Can't set qwerty layouts using the setxkbmap command

After the update, there aren't qwerty layouts as for example sk_qwerty. If you want to switch your present keyboard layout to any qwerty keyboard layout use this command:

$ setxkbmap NAME_OF_THE_LAYOUT qwerty

e.g.: for sk_qwerty use:

$ setxkbmap sk qwerty

After the update, trying the above command I had this message "Error loading new keyboard description". I find out that the xserver doesn't have the rights to write, execute, read in the directory /var/tmp So give the permissions to that directory. Restart the xserver and you will have your deadkeys back! Don't believe? Try out the code e.g.: it layout

$ setxkbmap -layout it

Setup French Canadian (old ca_enhanced) layout

With disabled hotplugging

Since the new Xorg changed the way it deals with keyboards, the following method will only work if you disable "hotplugging" : http://wiki.archlinux.org/index.php/Xorg_input_hotplugging

With Xorg7, "ca_enhanced" is no more. You have to do a little trick to get the same layout that you are used to: Switch the old:

       Option          "XkbLayout"     "ca_enhanced"

To:

       Option          "XkbLayout"     "ca"
       Option          "XkbVariant"    "fr"

It will be similar with other layout, I presume. You can refer to Gentoo HowTo there: http://www.gentoo.org/proj/en/desktop/x/x11/modular-x-howto.xml


Workaround

I use a workaround so that I don't have to manually change the HAL fdi policies, as this is the new way of dealing with keymaps with the new Xorg. I use "setxkbmap" : http://wiki.archlinux.org/index.php/Xorg_input_hotplugging#Using_setxkbmap

Change the X keyboard layout to french canadian with this command:

#setxkbmap ca -variant fr


To make it change automatically, you can try this:

Created the file

~.config/autostart/keymap.desktop

and added this to it:

[Desktop Entry]
Encoding=UTF-8
Version=0.9.4
Type=Application
Name=Keymap French Canadian
Comment=
Exec=setxkbmap ca -variant fr
StartupNotify=false
Terminal=false
Hidden=false

It works at least for XFCE4 and LXDE.

Missing libraries

  • Help! I get an error message running my favourite app saying "libXsomething" doesn't exist!

In most cases, all you need to do is take the name of the library (eg libXau.so.1), convert it all to lowercase, remove the extension, and pacman for it:

# pacman -S libxau

This will install the library you're missing, and all will be well again!

Some packages fail to build and complain about missing X11 includes

Just reinstall the packages xproto and libx11, even if they are already installed.

Unable to load font '(null)'

  • Some programs don't work and say unable to load font `(null)'.

These packages would like some extra fonts. Some programs only work with bitmap fonts. Two major packages with bitmap fonts are available, xorg-fonts-75dpi and xorg-fonts-100dpi. You don't need both; one should be enough. To find out which one would be better in your case, try this:

$ xdpyinfo | grep resolution

and grab what is closer to you (75 or 100 instead of XX)

# pacman -S xorg-fonts-XXdpi


After updating to xorg-server 1.5, KDE4 Konsole crashes and/or systray icons disappear on right click

Replace

Option "BackingStore" "True"

by

Option "BackingStore" "False"

in /etc/X11/xorg.conf.

Updating from testing version to extra (missing files)

If you've updated from Xorg 7 in testing to Xorg 7 in extra and are finding that many files seem to be missing (including startx, /usr/share/X11/rgb.txt, and others), you may have lost many files due to the xorg-clients package splitting from a single package into many smaller sub packages.

You need to reinstall all the packages that are dependencies of xorg-clients:

# pacman -S xorg-apps xorg-font-utils xorg-res-utils xorg-server-utils \
          xorg-twm xorg-utils xorg-xauth xorg-xdm xorg-xfs xorg-xfwp \
          xorg-xinit xorg-xkb-utils xorg-xsm

This should fix the problem.

Problem with MIME types in various desktop environments

If you noticed icons missing and can't click-open files in desktop environments, add the following lines to /etc/profile or your preferred init script and reboot.

XDG_DATA_DIRS=$XDG_DATA_DIRS:/usr/share
export XDG_DATA_DIRS

DRI stops working with Matrox cards

If you use a Matrox card and DRI stops working after upgrading to xorg7, try adding the line

Option "OldDmaInit" "On"

to the Device section that references the video card in xorg.conf.

Cannot start any clients under Xephyr

The client connections are rejected by the X server's security mechanism, you can find a complete explanation and solution in [1].

Cannot start X clients as root using "su"

If you're getting "Client is not authorized to connect to server", try adding the line

 session        optional        pam_xauth.so

to the file /etc/pam.d/su. pam_xauth will properly set environment variables and handle xauth keys.

Cannot run in frambuffer mode

If the X fail to start with the following log messages:

(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
       compiled for 1.6.1, module version = 0.0.2
       ABI class: X.Org Video Driver, version 5.0
(II) FBDEV(1): using default device
 
Fatal server error:
Cannot run in framebuffer mode. Please specify busIDs        for all framebuffer devices

then simply uninstalling xf86-video-fbdev will help.

Ctrl-Alt-Backspace doesn't exit X

Modification to /etc/X11/xorg.conf

New xorg disables zapping with Template:Keypress+Template:Keypress+Template:Keypress by default. You can enable it by adding the following line to Template:Filename

 Option  "XkbOptions" "terminate:ctrl_alt_bksp" 

to InputDevice section for keyboard

If you use input hotplugging

If you are using hal to manage your keyboard, you must add the following to Template:Filename to enable this behavior. If that file does not exist, copy it from the template at Template:Filename

<merge key="input.xkb.options" type="string">terminate:ctrl_alt_bksp</merge>

Restart hal after making the modification.

Another way is to add the following line to Template:Filename

setxkbmap -option terminate:ctrl_alt_bksp

Template:Box Note

Disabling Xorg before the GUI login

If Xorg is set to boot up automatically and for some reason you need to prevent it from starting up before the login/display manager appears (if your rc.conf file is misconfigured and Xorg does not recognize your mouse or keyboard input, for instance), there are two ways. From the grub menu you can specify the runlevel in the kernel line by adding a number to the end of the kernel line specifying the run level you want. The following example sets the run level to 3:

kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/..ro 3

If you have not only misconfigured rc.conf to make Xorg unusable, but you have also set the grub menu wait time to zero, or cannot otherwise use grub to prevent Xorg from booting, you must use the Arch live CD. Boot up the live CD and login as root. You need a mount point, such as /mnt, and you need to know the name of the partition you want to mount. You can use the command

fdisk -l

as root to see your partitions. Usually the one you want will be like /dev/sda1. Then to mount this to /mnt use

mount /dev/sda1 /mnt

Then your filesystem will show up under /mnt. So your rc.conf file, for example, would be in /mnt/etc/rc.conf. From here you can delete the gdm module to prevent Xorg from booting up normally, or make any other necessary changes.

Links

See also:

External Links