- 1 Basics
- 2 Tips
Resource file settings
There are several options you can set in your X resources files that may make this terminal emulator much easier to use.
TERM Environmental Variable
Allow xterm to report the TERM variable correctly. Do not set the TERM variable from your ~/.bashrc or ~/.bash_profile or similar file. The terminal itself should report the correct TERM to the system so that the proper terminfo file will be used. Two usable terminfo files are xterm, and xterm-256color.
- Without setting TERM explicitly, xterm should report
xterm. You can check this from within xterm using either of these commands:
$ echo $TERM $ tset -q
- When TERM is not set explicitly, color schemes for some programs, such as vim, may not appear until a key is pressed or some other input occurs. This can be remedied with this resource setting :
Make certain your locale settings are correct for UTF-8. Adding the following line to your resource file will then make xterm interpret all incoming data as UTF-8 encoded:
Fix the 'Alt' key
As new lines are written to the bottom of the xterm window, older lines disappear from the top. The saved lines can be redisplayed by scrolling. By default, 1024 lines are saved. You can change the number of saved lines with the
Other X resources that affect scrolling are
jumpScroll, set to
true by default, and
fastScroll, both of which default to
The scrollbar is not shown by default. It can be made visible by a menu selection, by command line options, or by setting resource values. It can be made to appear to the left or right of the window and its visual appearance can be modified through resource settings.
The scrollbar operates differently from what you may be accustomed to using.
- To scroll down:
- – Click on the scrollbar with the left mouse button.
- – Click on the scrollbar below the thumb with the middle mouse button.
- To scroll up:
- – Click on the scrollbar with the right mouse button.
- – Click on the scrollbar above the thumb with the middle mouse button.
- To position text, moving in either direction:
- – Grab the thumb and use "click-and-drag" with the middle mouse button.
The Archlinux version of xterm is compiled with the toolbar, or menubar, disabled. The menus are still available as popups when you press Template:Keypress within the xterm window. The actions invoked by the menu items can often be accomplished using command line options or by setting resource values.
xterm*geometry: 80x32, in your resources file. This does start xterm in an 80 column by 32 row main window, but it also forces the menu windows to be 80 pixels by 32 pixels! Replace the incorrect line with this:
Some of the menu options are discussed below.
Ctrl + LeftMouse
Secure Keyboardattempts to ensure only the xterm window, and no other application, receives your keystrokes. The display changes to reverse video when it is invoked. If the display is not in reverse video, the Secure Keyboard mode is not in effect. Please read the "SECURITY" section of the xterm man page for this option's limitations.
Allow SendEventsallows other processes to send keypress and mouse events to the xterm window. Because of the security risk, do not enable this unless you are very sure you know what you are doing.
Log to File– The log file will be named
Xterm.log.hostname.yyyy.mm.dd.hh.mm.ss.XXXXXX. This file will contain all the printed output and all cursor movements. Logging may be a security risk.
- The six
Send *** Signalmenu items are not often useful, except when your keyboard fails.
KILLwill close the xterm window.
KILLshould be avoided, as it does not allow any cleanup code to run.
Quitmenu item will also close the xterm window – it is the same as sending a
HUPsignal. Most users will use the keyboard combination Template:Keypress or will type
exitto close an xterm instance.
Ctrl + MiddleMouse
Select to Clipboard– Normally, selected text is stored in PRIMARY, to be pasted with Template:Keypress or by using the middle mouse button. By toggling this option to on, selected text will use CLIPBOARD, allowing you to paste the text selected in an xterm window into a GUI application using Template:Keypress. The corresponding XTerm resource is
Show Alternate Screen– When you use an a terminal application such as vim, or less, the alternate screen is opened. The main VT window, now hidden, remains in memory. You can view this main window, but not issue any commands in it, by toggling this menu option. You are able to select and copy text from this main window, then paste into the alternate screen or another application. Using the alternate screen may take some trial and error experimentation.
Show Tek Windowand
Switch to Tek Mode– The Tektronix 4014 was a graphics terminal from the 1970s used for CAD and plotting applications. The command line program
graph, from , and the application can be made to use xterm's Tek emulation; most people will prefer more modern display options for charting data.
Ctrl + RightMouse
- When using XLFD fonts, the first seven menu items will change the font face and the font size used in the current xterm window. If you are using an Xft font, only the font size will change, the font face will not change with the different selections, .
Tinyare useful if you wish to keep an eye on a process but do not want to devote a large amount of screen space to the terminal window. For example, a long compile operation where you only want to see if and when the compilation completes.
Selection, when using XLFD font names, allows you to switch to the font name stored in the PRIMARY selection (or CLIPBOARD).
From the Tek Window, Ctrl + MiddleMouse The selections allow you to move the focus between the Tek emulation window and the main, or VT, window, and also to close or hide the Tek window.
Copy and paste
Highlighting text using the mouse in an xterm will copy that text. Pasting into an xterm is accomplished by clicking the mouse middle-button or using the key combination Template:Keypress.
PRIMARY and CLIPBOARD
By default, xterm, and many other applications running under X, copy highlighted text into a buffer called the PRIMARY selection. The PRIMARY slection is short-lived; the text is immediately replaced by a new PRIMARY selection as soon as another piece of text is highlighted. Some applications will allow you to paste PRIMARY selections by using the middle-mouse, but not Template:Keypress, and some other applications may not allow pasting from PRIMARY entirely.
There is another buffer used for copied text called the CLIPBOARD selection. The text in the CLIPBOARD is long-lived, remaining available until a user actively overwrites it. Applications that use Template:Keypress and Template:Keypress for text copying and cutting operations, and Template:Keypress for pasting, are using the CLIPBOARD.
The fleeting nature of the PRIMARY selection, where copied text is lost as soon as another selection is highlighted, annoys some users. Xterm allows the user to switch between the use of PRIMARY and CLIPBOARD using
Select to Clipboard on the VT Options menu or with the
The new user usually discovers that text may be selected using a "click-and-drag" with the left mouse button. Double-clicking will select a word, where a word is defined as consecutive alphabetic characters plus the underscore, or the Basic Regular Expression (BRE) [A-Za-z_]. Triple-clicking selects a line, with a "tab" character usually copied as multiple "space" characters.
Another way of selecting text, especially useful when copying more than one full screen, is:
- Left-click at the start of the intended selection.
- Scroll to where the end of the selection is visible.
- Right-click at the end of the selection.
You do not have to be precise immediately with the right-click – any highlighted selection may be extended or shortened by using a right click.
You can clear any selected text by left-clicking once, anywhere within the xterm window.
Add the following line to your
[ -n "$XTERM_VERSION" ] && transset-df -a >/dev/null
Now, each time you launch a shell in an xterm and a composite manager is running, it will become transparent. the test in front of the transset-df command keeps it from executing if that variable is not defined. Note that your terminal will not be transparent if you launch a program other than the shell this way. It is probably possible to work around this if you want the functionality.
Enable bell urgency
Add the following line to your
Remove black border
Xterm has a black border in some cases, you can disable this by adding the following line to your
Change background and font color
First you make an Xresource file which is a regular textfile and it is described at X resources. You find a color you like at http://www.colorpicker.com/ and copy the 6 alphanumerical above the picture. Then to change your background you add
and for the font you add
Notice the casing on xterm. It did not work for me with XTerm or Xterm. Also after you make changes and do
xrdb -merge /path/to/Xresources
you have to start a new xterm window to see the changes.