Difference between revisions of "Zepto Znote 6214W"

From ArchWiki
Jump to: navigation, search
m (Introduction)
(Redirected page to Laptop)
(5 intermediate revisions by 4 users not shown)
Line 1: Line 1:
#REDIRECT: [[Laptop]]
The is a nice laptop, or rather a really small and light desktop replacement.
It is build upon the Intel NAPA platform with i945PM Chipset, Core Duo CPU and ipw3945 wireless.
Remember to update the BIOS on ftp.zepto.dk/Firmware/Bios/6214W
==What does work?==
3D Acceleration using the latest nvidia driver
Wireless using ipw3945
Wired network using r1000 (included in arch stock kernel)
Suspend to swap. though it was really slow to suspend.
20/2-07:Texas Instrument card reader works, some drivers are loaded but to make the card reader working just add '''tifm_sd''' in the module section from '''rc.conf'''
20/2-07:TV output is fine with nvidia driver and an appropriate xorg.conf, either dual screen or twinview mode.
These worked for me nearly ootb
Frequency-Scaling with acpi-cpufreq
==Not tested==
Texas Intrument card reader, there's currently a developement running to make it work [http://developer.berlios.de/projects/tifmxx/ here] and [http://openfacts.berlios.de/index-en.phtml?title=Pcixx21_flash_media_module here]
Installation is straigt forward. You might have to select IDE-Legacy in the first Grub menu, otherwise you might get a kernel panic. Drivers for the wired and wireless network cards are included.
==Kernel boot options==
Boot the kernel with <code>noapic</code> because the BIOS is a little buggy. This prevents random freezes when watching DVD's, gaming etc.
My MODULES looks like this:
<code>MODULES=(!ata_piix ahci !hw_random r1000 ipw3945)</code>
This makes sure eth1 is wired network and eth2 is wireless. The hw_random module seems to fail on this laptop so I blacklist it.
==Graphic Card and Xorg==
This laptop has a GeForce Go 7600 graphic card and works only with the proprietary nvidia driver (or vesa). Native resolution is only possible with the nvidia driver.
The monitor runs at 1280x768 60Hz, so remember to add "1280x768" to Modes
You have to use ipw3945 in order to make your wifi connection work.
pacman -Sy ipw3945
will install the necessary packages (for the stock kernel that is)
Then add <code>ipw3945d</code> to DAEMONS in rc.conf. See [http://wiki.archlinux.org/index.php/Wireless_Setup#Setup_and_Boot wireless setup] for additional information on wireless networking
The sound will work out of the box, make sure you have:
pacman -Sy alsa-lib alsa-utils
packages installed, and add yourself to audio group.
As of kernel 2.6.26 you might not be able to adjust the PCM volume, as there is no slider.
You can workaround this with setting the following in your /etc/modprobe.d/sound
options snd-hda-intel model=lenovo enable=1 index=0
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
To get volume hotkeys to work create ~/.Xmodmap with:
keycode 160 = XF86AudioMute
keycode 174 = XF86AudioLowerVolume
keycode 176 = XF86AudioRaiseVolume
(If you use openbox do not forget to map the XF86xxxxxx keys in rc.xml)
= External Links =
* This report has been listed in the [http://tuxmobil.org/zepto.html Linux Laptop and Notebook Installation Survey: Zepto].

Latest revision as of 11:47, 12 September 2014

Redirect to: