CUPS/Printer sharing
This article contains instruction on sharing printers from a GNU/Linux system.
Protocol | Linux | Windows | macOS |
---|---|---|---|
Discovery (DNS-SD/mDNS) | CUPS with Avahi | Native support since Windows 10 | Bonjour |
Internet Printing Protocol | CUPS | Control Panel > Programs > Turn Windows features on or off > Print and Document Services > Internet Printing Client | Native support |
SMB shared printer | Samba with CUPS | Native support | Native support |
Line Printer Daemon protocol | CUPS | Control Panel > Programs > Turn Windows features on or off > Print services > LPD Print Service and LPR Port Monitor |
Native support |
Creating class for multiple printers
In CUPS, a class is a group of printers which appears to clients as a single printer. When a client selects to print to the class, CUPS selects any printer in the group to accept the print job. This may be especially useful when one printer from the class must be removed. If it is excluded from the class, end users will not notice any change because the print job will be queued to another printer in the class. Creating and managing classes can be done from CUPS Web GUI.
Printer sharing
DNS-SD advertisement
To announce the printer to the network over DNS-SD/mDNS (Bonjour in Apple world), Avahi must be installed and running on the server.
To enable it, either select Share printers connected to this system in the web interface, or manually set Browsing Yes
in /etc/cups/cupsd.conf
:
/etc/cups/cupsd.conf
... Browsing Yes ...
Afterwards restart cups.service
.
Note that "browsing" at the print server is a different thing from "browsing" at a remote networked host. On the print server, cupsd
provides the DNS-SD protocol support which the avahi-daemon
broadcasts. The cups-browsed
service is unnecessary on the print server, unless also broadcasting the old CUPS protocol, or the print server is also "browsing" for other networked printers. On the remote networked host, the cups-browsed
service is required to "browse" for network broadcasts of print services, and running cups-browsed
will also automatically start cupsd
.
The cups.service
service will be automatically started when a USB printer is plugged in, however this may not be the case for other connection types. If cups.service
is not running, avahi-daemon
does not broadcast the print services, so in that case the systemd unit service file must be modified to start on boot, and then the service must again be "enabled/installed" with the new dependency. To do this, edit the service file [Install]
section to add a WantedBy=default.target
dependency, and then enable and start the cups.service
service.
Sharing via Internet Printing Protocol
The server can be configured using either the web interface or by manually editing /etc/cups/cupsd.conf
.
Open up the web interface to the server, select the Administration tab, look under the Server heading, and enable the "Share printers connected to this system" option. Save your change by clicking on the Change Settings button. The server will automatically restart.
On the server computer (the one directly connected to the printer), allow access to the server by modifying the location directive. For instance:
/etc/cups/cupsd.conf
<Location /> Order allow,deny Allow localhost Allow 192.168.0.* </Location> ...
Also make sure the server is listening on the IP address the client will use:
/etc/cups/cupsd.conf
... Listen <hostname>:631 ...
There are more configuration possibilities, including automatic methods, which are described in detail in Using Network Printers and cupsd.conf(5).
After making any modifications, restart cups.service
.
If CUPS is started using socket activation, create a drop-in snippet for cups.socket
so that socket activation also works for remote connections:
/etc/systemd/system/cups.socket.d/override.conf
[Socket] ListenStream=631
Sharing via Samba
Samba is an implementation of the Windows file and printer sharing protocols, even the most vintage ones.
To configure Samba on the Linux server, edit /etc/samba/smb.conf
file to allow access to printers. File smb.conf
can look something like this:
/etc/samba/smb.conf
[global] ... printing = CUPS ... [printers] comment = All Printers path = /var/spool/samba browseable = yes # to allow user 'guest account' to print. guest ok = no writable = no printable = yes create mode = 0700 write list = root @adm @wheel yourusername
That should be enough to share the printer, yet adding an individual printer entry may be desirable:
/etc/samba/smb.conf
[ML1250] comment = Samsung ML-1250 Laser Printer printer = ml1250 path = /var/spool/samba printing = cups printable = yes user client driver = yes # to allow user 'guest account' to print. guest ok = no writable = no write list = root @adm @wheel yourusername valid users = root @adm @wheel yourusername
Please note that this assumes configuration was made so that users must have a valid account to access the printer. To have a public printer, set guest ok
to yes
, and remove the valid users
line. To add accounts, set up a regular GNU/Linux account and then set up a Samba password on the server. See Samba#User management.
After this, restart smb.service
and nmb.service
.
See Samba's documentation Setting up Samba as a Print Server for more details.
Sharing via Line Printer Daemon protocol
/etc/cups/cupsd.conf
. Therefore, running cups-lpd on your server will allow any computer on your network (and perhaps the entire Internet) to print to your server.Enable and start cups-lpd.socket
.
Remote administration
Once the server is set up as described in #Printer sharing, it can also be configured so that it can be remotely administered. Add the allowed hosts to the <Location /admin>
block in /etc/cups/cupsd.conf
, using the same syntax as described in #Sharing via Internet Printing Protocol. Note that three levels of access can be granted:
<Location /> #access to the server <Location /admin> #access to the admin pages <Location /admin/conf> #access to configuration files
To give remote hosts access to one of these levels, add an Allow
statement to that level's section. An Allow
statement can take one or more of the forms listed below:
Allow from all Allow from host.domain.com Allow from *.domain.com Allow from ip-address Allow from ip-address/netmask Allow from @LOCAL
Deny statements can also be used. For example, to give full access to all hosts on your local network interfaces, edit /etc/cups/cupsd.conf
to include this:
# Restrict access to the server... # By default only localhost connections are possible <Location /> Order allow,deny Allow from @LOCAL </Location> # Restrict access to the admin pages... <Location /admin> Order allow,deny Allow from @LOCAL </Location> # Restrict access to configuration files... <Location /admin/conf> AuthType Basic Require user @SYSTEM Order allow,deny Allow from @LOCAL </Location>
You might also need to disable the HTTPS requirement, when using the default self-signed certificate generated by CUPS:
DefaultEncryption IfRequested
This should avoid the error: 426 - Upgrade Required when using the CUPS web interface from a remote machine.
Kerberos
Kerberos can be used to authenticate users accessing a remote CUPS server. This assumes that your machine has a keytab and it will need a ticket for "HTTP". Instead of using http://localhost:631
you must use https://host.example.co.uk:631
- encryption is required for auth (hence https) and the full hostname is needed so that Kerberos/Negotiate can work. In addition, the server must be configured in /etc/cups/cupsd.conf
to use a DefaultAuthType
of Negotiate
.
If you are using Samba's winbind NSS support, you can add an AD group name to /etc/cups/cups-files.conf
- in the following example sysadmin
might be an AD group:
/etc/cups/cups-files.conf
SystemGroup sys root sysadmin
Troubleshooting
See CUPS/Troubleshooting for general troubleshooting tips.
Cannot print with GTK applications
If you get a getting printer information failed message when you try to print from GTK applications, add this line to your /etc/hosts
:
/etc/hosts
serverip some.name.tld ServersHostname
Permission errors on Windows
Some users fixed NT_STATUS_ACCESS_DENIED
(Windows clients) errors by using a slightly different syntax:
smb://workgroup/username:password@hostname/printer_name
Local Printing is fine, but no printing via Network
Depending on the printer (Especially for unidirectional label-printers) one side must be configured with the raw
-driver to be able to print
Other operating systems
More information on interfacing CUPS with other printing systems can be found in the CUPS manual, e.g. on http://localhost:631/help/network.html.