Cube KNote i1101

From ArchWiki
Jump to navigation Jump to search

Tango-edit-clear.pngThis article or section does not follow the Laptop page guidelines.Tango-edit-clear.png

Reason: Needs IDs in hardware table (Discuss in Talk:Cube KNote i1101)
Hardware PCI/USB ID Working?
Video Yes
Touchscreen Yes
Wireless Yes
Audio Yes
Touchpad Yes
Camera No
Bluetooth Yes
MicroSD Reader Yes
Accelerometer Yes

Touchscreen

Needs gsl-firmware-gitAUR

Audio

If the 3.5mm jack is not recognized, add following lines to /etc/modprobe.d/50-sound.conf

alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel

Accelerometer

You need to build kernel manually to enable bmc150_accel_i2c IIO driver, and install iio-sensor-proxy if you use a desktop environment. The DSDT data gives a faulty ACCEL_MOUNT_MATRIX data, so create the following file in /etc/udev/hwdb.d/61-sensor-local.hwdb with the following contents:

sensor:modalias:acpi:BOSC0200*:dmi:*:svnALLDOCUBE:pni1101:*
 ACCEL_MOUNT_MATRIX=1, 0, 0; 0, -1, 0; 0, 0, -1

Reboot and accelerometer works. However, it will fail after sleep and wake up, which considered as a driver bug.