dm-crypt (简体中文)/Encrypting a non-root file system (简体中文)

From ArchWiki


附注: Two thirds of the page is not translated(在 Talk:Dm-crypt (简体中文)/Encrypting a non-root file system (简体中文)# 中讨论)

The following are examples of encrypting a secondary, i.e. non-root, filesystem with dm-crypt.


Encrypting a secondary filesystem usually protects only sensitive data, while leaving the operating system and program files unencrypted. This is useful for encrypting an external medium, such as a USB drive, so that it can be moved to different computers securely. One might also choose to encrypt sets of data separately according to who has access to it.

Because dm-crypt is a block-level encryption layer, it only encrypts full devices, full partitions and loop devices. To encrypt individual files requires a filesystem-level encryption layer, such as eCryptfs or EncFS. See Disk encryption for general information about securing private data.


这个例子说的是对 /home 分区的加密,但是也可以应用到其他非根分区的、包含用户数据的分区。

提示: 你可能在一个分区上有某个用户专用的 /home 目录,或者是所有用户共用这个分区作为 /home 目录。

首先要保证分区是空的(上面没有建立文件系统)。如果有文件系统,删除这个分区并重新建立一个空的分区。然后对其安全擦除,参见 Dm-crypt/Drive preparation#Secure erasure of the hard disk drive.


建立 LUKS 头:

# cryptsetup options luksFormat device

device 替换成之前建立的分区。参见 Dm-crypt/Device encryption#Encryption options for LUKS mode 来知道 options 可以写什么。


# cryptsetup open device name

解锁分区之后,它会被映射成块设备 /dev/mapper/name,现在要建立 文件系统

# mkfs.fstype /dev/mapper/name

把文件系统挂载到 /home;或者如果它是某个用户专用的的话,挂载到 /home/username,参见 #手动挂载和卸载

提示: 卸载并挂载一次来确定映射没有问题。



# cryptsetup open device name
# mount -t fstype /dev/mapper/name /mnt/home


# umount /mnt/home
# cryptsetup close name
提示: GVFS 也可以挂载加密分区。用支持 gvfs 的文件管理器(比如 Thunar)挂载该分区的时候,密码对话框就会弹出来。对于其他桌面环境,zulucryptAUR 也提供了图形界面。




配置 /etc/crypttab 文件,systemd 的自动解析会在启动过程中自动解锁。如果home分区是所有用户一起用的(或者要自动挂载其他加密块设备),这种方法是最推荐使用的。

更多细节参见 Dm-crypt/System configuration#crypttabDm-crypt/System configuration#Mounting at boot time


借助 pam_exec 调用cryptsetup open 来实现用户登录时解锁分区。如果整个分区都是某个用户专用的 home 目录,这个方法就比较推荐。参见 dm-crypt/Mounting at login

此外也可以用 pam_mount

Loop device

There are two methods for using a loop device as an encrypted container, one using losetup directly and one without.

Without losetup

Using losetup directly can be avoided completely by doing the following [1]:

$ dd if=/dev/urandom of=bigsecret.img bs=100M count=1 iflag=fullblock
$ cryptsetup luksFormat bigsecret.img

Make sure to not omit the iflag=fullblock option, otherwise dd might return a partial read. See dd#Partial read for details.

Before running cryptsetup, look at the encryption options for LUKS mode and ciphers and modes of operation first to select your additional desired settings.

The instructions for opening the device and making the file system are the same as #分区.

Creating a file smaller than the LUKS2 header (16 MiB) will give a Requested offset is beyond real size of device bigsecret.img error when trying to open the device.

Manual mounting and unmounting procedure is equivalent to #Manual mounting and unmounting.

Using losetup

A loop device enables to map a blockdevice to a file with the standard util-linux tool losetup. The file can then contain a filesystem, which can be used quite like any other filesystem. A lot of users know TrueCrypt as a tool to create encrypted containers. Just about the same functionality can be achieved with a loopback filesystem encrypted with LUKS and is shown in the following example.

First, start by creating an encrypted container with dd, using an appropriate random number generator:

$ dd if=/dev/urandom of=bigsecret.img bs=100M count=1 iflag=fullblock

This will create the file bigsecret.img with a size of 100 mebibytes.

注意: To avoid having to resize the container later on, make sure to make it larger than the total size of the files to be encrypted, in order to at least also host the associated metadata needed by the internal file system. If you are going to use LUKS mode, its metadata header alone requires up to 16 mebibytes.

Next create the device node /dev/loop0, so that we can mount/use our container:

# losetup /dev/loop0 bigsecret.img
注意: If it gives you the error /dev/loop0: No such file or directory, you need to first load the kernel module with modprobe loop as root. These days (Kernel 3.2) loop devices are created on demand. Ask for a new loop device with losetup -f as root.

From now on the procedure is the same as for #分区, except for the fact that the container is already randomised and will not need another secure erasure.

提示: Containers with dm-crypt can be very flexible. Have a look at the features and documentation of Tomb. It provides a dm-crypt script wrapper for fast and flexible handling.

Manual mounting and unmounting

To unmount the container:

# umount /mnt/secret
# cryptsetup close secret
# losetup -d /dev/loop0

To mount the container again:

# losetup /dev/loop0 bigsecret.img
# cryptsetup open /dev/loop0 secret
# mount -t ext4 /dev/mapper/secret /mnt/secret