Install Arch Linux via SSH

From ArchWiki
(Redirected from Install from SSH (Italiano))

This article is intended to show users how to install Arch remotely via an SSH connection. Consider this approach when the host is located remotely or you wish to use the copy/paste ability of an SSH client to do the Arch install.

On the remote (target) machine

Note: These steps require physical access to the machine. If the host is physically located elsewhere, this may need to be coordinated with another person.

Boot the target machine into a live Arch environment via the Live CD/USB image: this will log the user in as root.

At this point, setup the network on the target machine as for example suggested in Installation guide#Connect to the internet.

Setup a root password which is needed for an SSH connection, since the default Arch password for root is empty:

# passwd

Confirm that PermitRootLogin yes is set in /etc/ssh/sshd_config. If it is not, set it and reload the OpenSSH daemon sshd.service to apply the changes.

Note: If the target machine is behind a NAT router, and you require external access, the SSH port (22 by default) will need to be forwarded to the target machine's LAN IP address. Alternatively, you can setup a reverse SSH tunnel to your local (client) machine and connect back through it, see the -R flag of ssh(1).

On the local machine

On the local machine, connect to the target machine via SSH with the following command:

$ ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null
Note: The -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null options will prevent verifying and writing the live environment's SSH host keys to ~/.ssh/known_hosts. This will avoid the REMOTE HOST IDENTIFICATION HAS CHANGED warning in case you have ever connected to the IP address before.
Tip: If both machines are on the same local network, you can use the mDNS hostname archiso.local in place of the target's IP address:
$ ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null root@archiso.local

From here one is presented with the live environment's welcome message and is able to administer the target machine as if sitting at the physical keyboard. At this point, if the intent is to simply install Arch from the live media, follow the guide at Installation guide. If the intent is to edit an existing Linux install that got broken, follow the Install from existing Linux wiki article.

Tip: Consider using GNU Screen or tmux on the target machine (both are available in the live environment), so that if you are disconnected you can reattach to your multiplexer's session.

Installation on a headless server

Note: These steps may require physical access to the headless machine. Somebody has to insert the installation medium and power up the headless server.

This section describes installation of Arch Linux on a headless server without a keyboard, mouse or display. It uses an additional drive with cloud-init NoCloud configuration to automatically configure OpenSSH authorized keys and optionally iwd connection(s).

Prepare cloud-init configuration files

There are three required cloud-init configuration files: meta-data, user-data and network-config.

The meta-data file can be empty:

$ printf "" > meta-data

user-data will contain the relevant configuration:

  - name: root

Replace ssh-ed25519 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX with your public SSH key. To add multiple keys, simply repeat the statement as shown above.

To automatically connect to a Wi-Fi network, use the write_files: statement to create iwd network configuration files in the correct directory. For example:

  - name: root

- content: |
  path: /var/lib/iwd/spaceship.psk

- systemctl restart iwd.service

cloud-init creates network configuration that differs from one shipped in the ISO. I.e. mDNS responder and DHCPv6 client are not enabled. To avoid this, disable cloud-init's network configuration in network-config:

version: 2
config: disabled

Once all three files are created they need to be placed on a drive with an ISO 9660 or FAT volume labeled CIDATA.

Using an additional FAT formatted drive

Use a FAT formatted drive. Copy meta-data, user-data and network-config to the drive and change the file system's LABEL to CIDATA.

You will need to attach this drive to the headless machine in addition to the one with the official ISO.

Using an additional ISO

Create a cloud-init.iso file using xorriso from libisoburn:

$ xorrisofs -output cloud-init.iso -volid CIDATA -joliet -rational-rock meta-data user-data network-config

Prepare the cloud-init data medium by burning cloud-init.iso to an optical disc or, if deployment options permit, use the ISO as is.

Using a single USB flash drive

If the installation image is written to e.g. a USB flash drive, provided there is enough space on the drive, an additional partition to house cloud-init data can be created.

Install dosfstools, mtools and libisoburn.

First create a 2 MiB FAT image with its LABEL set to CIDATA:

$ mkfs.fat -C -n CIDATA cloud-init.img 2048

Copy the meta-data and user-data files to the root of it:

$ mcopy -i cloud-init.img meta-data user-data network-config ::

Repack the official ISO to include the FAT image as a third partition:

$ xorriso -indev archlinux-version-x86_64.iso -outdev archlinux-version-x86_64-with-cidata.iso -append_partition 3 0x0c cloud-init.img -boot_image any replay

Finally follow USB flash installation medium#Using the ISO as is (BIOS and UEFI) to prepare the USB flash drive installation medium using the repacked ISO (archlinux-version-x86_64-with-cidata.iso).

Using a single custom-built ISO

Alternatively, create a custom ISO using Archiso. This allows using only one drive regardless of type.

Use the releng profile as basis. Place the cloud-init configuration files in airootfs/var/lib/cloud/seed/nocloud/ and build the ISO.

Boot from the installation medium

Once finished, deploy the installation medium and the cloud-init data medium (if it is separate) to the headless machine using the appropriate method.

Power up the headless machine and boot into a live Arch environment from the installation medium. Wait for a minute or so to allow the headless machine time to boot up and connect to the network.

From your existing machine (with keyboard and display) SSH into the live Arch environment on the headless server and complete the installation as described in the Installation guide.

Note: To belabor the obvious, all the Wi-Fi and SSH configuration that was carried out in the boot image needs to be done again in the actual Arch Linux installation to allow WiFi SSH access to the headless machine after installation.