systemd has its own logging system called the journal; running a separate logging daemon is not required. To read the log, use.
In Arch Linux, the directory
/var/log/journal/ is a part of the package, and the journal (when
Storage= is set to
/etc/systemd/journald.conf) will write to
/var/log/journal/. If that directory is deleted, systemd will not recreate it automatically and instead will write its logs to
/run/systemd/journal in a nonpersistent way. However, the directory will be recreated if
Storage=persistent is added to
systemd-journald.service is restarted (or the system is rebooted).
A syslog severity code (in systemd called priority) is used to mark the importance of a message RFC 5424 6.2.1.
|0||Emergency||emerg||System is unusable||Severe Kernel BUG, systemd dumped core.|
This level should not be used by applications.
|1||Alert||alert||Should be corrected immediately||Vital subsystem goes out of work. Data loss. |
|2||Critical||crit||Critical conditions||Crashes, coredumps. Like familiar flash:|
Failure in the system primary application, like X11.
|3||Error||err||Error conditions||Not severe error reported:|
|4||Warning||warning||May indicate that an error will occur if action is not taken.||A non-root file system has only 1GB free.|
|5||Notice||notice||Events that are unusual, but not error conditions.|
|6||Informational||info||Normal operational messages that require no action.|
|7||Debug||debug||Information useful to developers for debugging the application.|
These rules are recommendations, and the priority level of a given error is at the application developer's discretion. It is always possible that the error will be at a higher or lower level than expected.
A syslog facility code is used to specify the type of program that is logging the message RFC 5424 6.2.1.
|2||Mail system||Archaic POSIX still supported and sometimes used (for more)|
|3||daemon||System daemons||All daemons, including systemd and its subsystems|
|4||auth||Security/authorization messages||Also watch for different facility 10|
|5||syslog||Messages generated internally by syslogd||For syslogd implementations (not used by systemd, see facility 3)|
|6||lpr||Line printer subsystem (archaic subsystem)|
|7||news||Network news subsystem (archaic subsystem)|
|8||uucp||UUCP subsystem (archaic subsystem)|
|10||authpriv||Security/authorization messages||Also watch for different facility 4|
|16||local0||Local use 0 (local0)|
|17||local1||Local use 1 (local1)|
|18||local2||Local use 2 (local2)|
|19||local3||Local use 3 (local3)|
|20||local4||Local use 4 (local4)|
|21||local5||Local use 5 (local5)|
|22||local6||Local use 6 (local6)|
|23||local7||Local use 7 (local7)|
Useful facilities to watch: 0, 1, 3, 4, 9, 10, 15.
journalctl allows for the filtering of output by specific fields. If there are many messages to display, or if the filtering of large time spans has to be done, the output of this command can be extensively delayed.
- Show all messages matching
# journalctl --grep=PATTERN
- Show all messages from this boot:
# journalctl -bHowever, often one is interested in messages not from the current, but from the previous boot (e.g. if an unrecoverable system crash happened). This is possible through optional offset parameter of the
journalctl -b -0shows messages from the current boot,
journalctl -b -1from the previous boot,
journalctl -b -2from the second previous and so on – you can see the list of boots with their numbers by using
journalctl --list-boots. See for a full description; the semantics are more powerful than indicated here.
- Include explanations of log messages from the message catalog where available:
# journalctl -xNote that this feature should not be used when attaching logs to bug reports and support threads, as to limit extraneous output. You can list all known catalog entries by running
- Show all messages from date (and optional time):
# journalctl --since="2012-10-30 18:17:16"
- Show all messages since 20 minutes ago:
# journalctl --since "20 min ago"
- Follow new messages:
# journalctl -f
- Show all messages by a specific executable:
# journalctl /usr/lib/systemd/systemd
- Show all messages by a specific process:
# journalctl _PID=1
- Show all messages by a specific unit:
# journalctl -u man-db.service
- Show all messages from user services by a specific unit:
$ journalctl --user -u dbus
- Show kernel ring buffer:
# journalctl -k
- Show only error, critical and alert priority messages:
# journalctl -p err..alertYou can use numeric log level too, like
journalctl -p 3..1. If single number/log level is used,
journalctl -p 3, then all higher priority log levels are also included (i.e. 0 to 3 in this case).
- Show auth.log equivalent by filtering on syslog facility:
# journalctl SYSLOG_FACILITY=10
- If the journal directory (by default located under
/var/log/journal) contains a large amount of log data then
journalctlcan take several minutes to filter output. It can be sped up significantly by using
--fileoption to force
journalctlto look only into most recent journal:
# journalctl --file /var/log/journal/*/system.journal -f
See Lennart Poettering's blog post for details., , or
- By default, journalctl truncates lines longer than screen width, but in some cases, it may be better to enable wrapping instead of truncating. This can be controlled by the
SYSTEMD_LESSenvironment variable, which contains options passed to less (the default pager) and defaults to
FRSXMK(see and for details).
- By omitting the
Soption, the output will be wrapped instead of truncated. For example, start journalctl as follows:
$ SYSTEMD_LESS=FRXMK journalctl
- To set this behaviour as default, export the variable from
- While the journal is stored in a binary format, the content of stored messages is not modified. This means it is viewable with strings, for example for recovery in an environment which does not have systemd installed, e.g.:
$ strings /mnt/arch/var/log/journal/af4967d77fba44c6b093d0e9862f6ddd/system.journal | grep -i message
Journal size limit
If the journal is persistent (non-volatile), its size limit is set to a default value of 10% of the size of the underlying file system but capped at 4 GiB. For example, with
/var/log/journal/ located on a 20 GiB partition, journal data may take up to 2 GiB. On a 50 GiB partition, it would max at 4 GiB. To confirm current limits on your system review
systemd-journald unit logs:
# journalctl -b -u systemd-journald
The maximum size of the persistent journal can be controlled by uncommenting and changing the following:
It is also possible to use the drop-in snippets configuration override mechanism rather than editing the global configuration file. In this case, place the overrides under the
systemd-journald.service after changing this setting to apply the new limit.
Seefor more info.
Per unit size limit by a journal namespace
Edit the unit file for the service you wish to configure (for example sshd) and add
LogNamespace=ssh in the
/firstname.lastname@example.org by copying
/etc/systemd/journald.conf. After that, edit
email@example.com and adjust
SystemMaxUse to your liking.
Restarting the service should automatically start the new journal service
firstname.lastname@example.org. The logs from the namespaced service can be viewed with
journalctl --namespace ssh.
Seefor details about journal namespaces.
Clean journal files manually
Journal files can be globally removed from
/var/log/journal/ using e.g.
rm, or can be trimmed according to various criteria using
journalctl. For example:
- Remove archived journal files until the disk space they use falls below 100M:
# journalctl --vacuum-size=100M
- Make all journal files contain no data older than 2 weeks.
# journalctl --vacuum-time=2weeks
Journal files must have been rotated out and made inactive before they can be trimmed by vacuum commands. Rotation of journal files can be done by running
journalctl --rotate. The
--rotate argument can also be provided alongside one or more vacuum criteria arguments to perform rotation and then trim files in a single command.
Seefor more info.
Journald in conjunction with syslog
Compatibility with a classic, non-journald aware syslog implementation can be provided by letting systemd forward all messages via the socket
/run/systemd/journal/syslog. To make the syslog daemon work with the journal, it has to bind to this socket instead of
/dev/log (official announcement).
Forward journald to /dev/tty12
Create a drop-in directory
/etc/systemd/journald.conf.d and create a
fw-tty12.conf file in it:
[Journal] ForwardToConsole=yes TTYPath=/dev/tty12 MaxLevelConsole=info
Specify a different journal to view
There may be a need to check the logs of another system that is dead in the water, like booting from a live system to recover a production system. In such case, one can mount the disk in e.g.
/mnt, and specify the journal path via
--directory, like so:
# journalctl -D /mnt/var/log/journal -e
Journal access as user
By default, a regular user only has access to their own per-user journal. To grant read access for the system journal as a regular user, you can add that user to the
systemd-journal user group. Members of the
wheel groups are also given read access.
See Users and groups#User groups for more information.and