Kernel/Arch Build System
See Kernels for the main article.
The Arch Build System can be used to build a custom kernel based on the official package. This compilation method can automate the entire process, and is based on a very well tested package. You can edit the PKGBUILD to use a custom kernel configuration or add additional patches.
Getting the ingredients
Since you will be using makepkg, follow the best practices outlined there first. For example, you cannot run makepkg as root/sudo. Therefore, create a
build directory in your user home first.
$ mkdir ~/build/ $ cd ~/build/
Install the package and the package group.
You need a clean kernel to start your customization from. Retrieve PKGBUILD source using Git and few other files into your build directory by running:
$ asp update linux $ asp export linux
At this point, the directory tree looks like (there may be a few other files):
~/build/linux/-+ +--config \__PKGBUILD
Then, get any other file you need (e.g. custom configuration files, patches, etc.) from the respective sources.
Modifying the PKGBUILD
PKGBUILD and look for the
pkgbase parameter. Change this to your custom package name, e.g.:
providesarray. Your custom kernel will not be compatible with binary modules built against that kernel, so it cannot satisfy that dependency. Similarly, do not add
providesarray of the headers package, for similar reasons.
Avoid creating the doc
A large portion of the lengthy compiling effort is devoted to creating the documentation. As of June 16. 2021, the following patch to PKGBUILD avoids its creation:
63d63 < make htmldocs 194c194 < pkgname=("$pkgbase" "$pkgbase-headers" "$pkgbase-docs") --- > pkgname=("$pkgbase" "$pkgbase-headers")
This patch deletes line #63, and changes line #194. You might have to edit the PKGBUILD file manually if it does not apply cleanly.
prepare() function, you can apply needed kernel patches or change kernel build configuration.
If you need to change a few config options you can edit config file in the source.
Or you can use a GUI tool to tweak the options. Comment
make olddefconfig in the prepare() function of the PKGBUILD, and add your favorite tool:
... msg2 "Setting config..." cp ../config .config #make olddefconfig make nconfig # new CLI menu for configuration #make menuconfig # CLI menu for configuration #make xconfig # X-based configuration #make oldconfig # using old config from previous kernel version # ... or manually edit .config make prepare ...
/usr/share/doc/systemd/README. Check them before you compile. These requirements also change over time. Because Arch assumes you are using the official kernel, there will be no announcement of these changes. Before you install a new version of systemd, check the version release notes to make sure your current custom kernel meets any new systemd requirements.
Generate new checksums
#Changing prepare() suggests a possible modification to
$_srcname/.config. Since this path is not where downloading the package files ended, its checksum was not checked by makepkg (which actually checked
If you replaced the downloaded
config with another config file before running makepkg, install the package and generate new checksums by running:
You can now proceed to compile your kernel by the usual command
If you have chosen an interactive program for configuring the kernel parameters (like menuconfig), you need to be there during the compilation.
$ makepkg -s
-s parameter will download any additional dependencies used by recent kernels such as xml and docs.
- Kernel sources are PGP signed, and makepkg will attempt to verify them. See makepkg#Signature checking for details.
- The compilation can take up to several hours to complete depending on the hardware performance. Running compilation jobs simultaneously can reduce compilation time significantly on multi-core systems.
The compile step will leave two packages in the
~/build/linux folder, one for the kernel and one for the kernel headers. They might have names like:
# pacman -U linux-custom-headers-5.8.12-x86_64.pkg.tar.zst linux-custom-5.8.12-x86_64.pkg.tar.zst
(substitute the actual names of the files you have in the folder)
If you have modified
pkgbase in order to have your new kernel installed alongside the default kernel you will need to update your bootloader configuration file and add new entries ('default' and 'fallback') for your custom kernel and the associated initramfs images.
Assuming one has an arch kernel source that they want to update, one method to do that is with https://github.com/archlinux/linux. In what follows, the top kernel source directory is assumed at
In general, arch sets an arch kernel source with two local git repositories. The one at
archlinux-linux/ is a local bare git repository pointing to
https://github.com/archlinux/linux.git. The other one is at
src/archlinux-linux/, pulling from the bare repository. Possible local patches, and building, are expected at
For this example, the HEAD of the locally installed bare git repository source at
archlinux-linux/ was initially pointing to
$ cd ~/build/linux/archlinux-linux/ $ git log --oneline --max-count 1 HEAD
4010b622f1d2 Merge branch 'dax-fix-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
which is somewhere between v5.2.5-arch1 and v5.2.6-arch1.
$ git fetch --verbose
One can see it fetched v5.2.7-arch1, which was the newest archlinux tag, because it prints what new tags were obtained. If no new tags were obtained then there is no newer archlinux source available.
Now the source can be updated where the actual build will take place.
$ cd ~/build/linux/src/archlinux-linux/ $ git checkout master $ git pull $ git fetch --tags --verbose $ git branch --verbose 5.2.7-arch1 v5.2.7-arch1 $ git checkout 5.2.7-arch1
You can verify you are on track with something like
$ git log --oneline 5.2.7-arch1 --max-count=7
13193bfc03d4 Arch Linux kernel v5.2.7-arch1 9475c6772d05 netfilter: nf_tabf676926c7f60les: fix module autoload for redir 498d650048f6 iwlwifi: Add support for SAR South Korea limitation bb7293abdbc7 iwlwifi: mvm: disable TX-AMSDU on older NICs f676926c7f60 ZEN: Add CONFIG for unprivileged_userns_clone 5e4e503f4f28 add sysctl to disallow unprivileged CLONE_NEWUSER by default 5697a9d3d55f Linux 5.2.7
This shows few specific archlinux patches between
Arch Linux kernel v5.2.7-arch1 and
The up to date PKGBUILD, as well archlinux kernel configuration file, can be pulled in by the
$ cd ~/build/linux/ $ asp update linux $ asp export linux
aspcommand does not update linux files even though there is a newer archlinux source tag. A possible reason is that archlinux linux files lag behind archlinux source.
Now you should merge files located in
~/build/linux/. Merging can also done manually, or with specific utilities. Review #Changing prepare(), and run manually most, if not all, the shell commands of PKGBUILD::prepare().
At this point,
makepkg --verifysource should succeed. While #Compiling, make sure to also add
--noextract option to the
makepkg command, since it should be able to build the packages as if the source was extracted by
makepkg --nobuild. And you are back to #Installing.
One will probably want to remove
~/build/linux/linux/ after merging. In addition,
~/build/linux/src/archlinux will accumulate branches in the form of
5.2.7-arch1 if more recent updates are done in this fashion. These can be deleted with
$ cd ~/build/linux/src/archlinux $ git branch --delete --force --verbose 5.2.7-arch1
- https://www.kernel.org/doc/html/latest/kbuild/kconfig.html and the parent directory