This article describes how to set up Apache and how to optionally integrate it with PHP.
Install the package.
Apache configuration files are located in
/etc/httpd/conf. The main configuration file is
/etc/httpd/conf/httpd.conf, which includes various other configuration files. The default configuration file should be fine for a simple setup. By default, it will serve the directory
/srv/http to anyone who visits your website.
For optional further configuration, see the following sections.
These options in
/etc/httpd/conf/httpd.conf might be interesting for you:
- For security reasons, as soon as Apache is started by the root user (directly or via startup scripts) it switches to this UID. The default user is http, which is created automatically during installation.
- This is the port Apache will listen to. For Internet-access with router, you have to forward the port.
- If you want to setup Apache for local development you may want it to be only accessible from your computer. Then change this line to
- This is the admin's email address which can be found on e.g. error pages.
- This is the directory where you should put your web pages.
- Change it, if you want to, but do not forget to also change
<Directory "/srv/http">to whatever you changed your
DocumentRootto, or you will likely get a 403 Error (lack of privileges) when you try to access the new document root. Do not forget to change the
Require all deniedline to
Require all granted, otherwise you will get a 403 Error. Remember that the DocumentRoot directory and its parent folders must allow execution permission to others (can be set with
chmod o+x /path/to/DocumentRoot), otherwise you will get a 403 Error.
- This directive in
<Directory>sections causes Apache to completely ignore
.htaccessfiles. Note that this is now the default for Apache 2.4, so you need to explicitly allow overrides if you plan to use
.htaccessfiles. If you intend to use
mod_rewriteor other settings in
.htaccessfiles, you can allow which directives declared in that file can override server configuration. For more info refer to the Apache documentation.
More settings can be found in
To turn off your server's signature:
To hide server information like Apache and PHP versions:
User directories are available by default through http://localhost/~yourusername/ and show the contents of
~/public_html (this can be changed in
If you do not want user directories to be available on the web, comment out the following line in
You must make sure that your home directory permissions are set properly so that Apache can get there. Your home directory and
~/public_html must be executable for others ("rest of the world"):
$ chmod o+x ~ $ chmod o+x ~/public_html $ chmod -R o+r ~/public_html
/etc/httpd/conf/httpd.conf, uncomment the following three lines:
LoadModule ssl_module modules/mod_ssl.so LoadModule socache_shmcb_module modules/mod_socache_shmcb.so Include conf/extra/httpd-ssl.conf
If using Certbot (
certbot --apache), the following line needs to be uncommented as well:
LoadModule rewrite_module modules/mod_rewrite.so
After obtaining a key and certificate, make sure the
SSLCertificateKeyFile lines in
/etc/httpd/conf/extra/httpd-ssl.conf point to the key and certificate. If a concatenated chain of CA certificates was also generated, add that filename against
httpd.service to apply any changes.
<VirtualHost *:443>section for virtual host SSL support. See #Managing many virtual hosts for an example file.
If you want to have more than one host, uncomment the following line in
/etc/httpd/conf/extra/httpd-vhosts.conf set your virtual hosts. The default file contains an elaborate example that should help you get started.
To test the virtual hosts on your local machine, add the virtual names to your
127.0.0.1 domainname1.dom 127.0.0.1 domainname2.dom
httpd.service to apply any changes.
Managing many virtual hosts
If you have a huge amount of virtual hosts, you may want to easily disable and enable them. It is recommended to create one configuration file per virtual host and store them all in one folder, eg:
First create the folder:
# mkdir /etc/httpd/conf/vhosts
Then place the single configuration files in it:
# nano /etc/httpd/conf/vhosts/domainname1.dom # nano /etc/httpd/conf/vhosts/domainname2.dom ...
In the last step,
Include the single configurations in your
#Enabled Vhosts: Include conf/vhosts/domainname1.dom Include conf/vhosts/domainname2.dom
You can enable and disable single virtual hosts by commenting or uncommenting them.
A very basic vhost file will look like this:
<VirtualHost *:80> ServerAdmin firstname.lastname@example.org DocumentRoot "/home/user/http/domainname1.dom" ServerName domainname1.dom ServerAlias domainname1.dom ErrorLog "/var/log/httpd/domainname1.dom-error_log" CustomLog "/var/log/httpd/domainname1.dom-access_log" common <Directory "/home/user/http/domainname1.dom"> Require all granted </Directory> </VirtualHost> <VirtualHost *:443> ServerAdmin email@example.com DocumentRoot "/home/user/http/domainname1.dom" ServerName domainname1.dom:443 ServerAlias domainname1.dom:443 SSLEngine on SSLCertificateFile "/etc/httpd/conf/server.crt" SSLCertificateKeyFile "/etc/httpd/conf/server.key" ErrorLog "/var/log/httpd/domainname1.dom-error_log" CustomLog "/var/log/httpd/domainname1.dom-access_log" common <Directory "/home/user/http/domainname1.dom"> Require all granted </Directory> </VirtualHost>
First install PHP, then follow one of the next three subsections below. Finally, test the installation as described in the final subsection.
This method is probably the easiest, but is also the least scalable: it is suitable for a light request load. It also requires you to change the mpm module, which may cause problems with other extensions (e.g. it is not compatible with #HTTP/2).
/etc/httpd/conf/httpd.conf, comment the line:
#LoadModule mpm_event_module modules/mod_mpm_event.so
and uncomment the line:
LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
libphp.soincluded with the package does not work with
mod_mpm_event, but will only work
Otherwise you will get the following error:
Apache is running a threaded MPM, but your PHP Module is not compiled to be threadsafe. You need to recompile PHP. AH00013: Pre-configuration failed httpd.service: control process exited, code=exited status=1As an alternative, you can use
mod_proxy_fcgi(see #Using php-fpm and mod_proxy_fcgi below).
To enable PHP, add these lines to
- Place this at the end of the
LoadModule php_module modules/libphp.so AddHandler php-script .php
- Place this at the end of the
Using apache2-mpm-worker and mod_fcgid
This method provides improved performance and memory usage when serving multiple requests.
Install AUR and .
Create the needed directory and symlink it for the PHP wrapper:
# mkdir /srv/http/fcgid-bin # ln -s /usr/bin/php-cgi /srv/http/fcgid-bin/php-fcgid-wrapper
/etc/httpd/conf/extra/php-fcgid.conf with the following content:
# Required modules: fcgid_module <IfModule fcgid_module> AddHandler php-fcgid .php AddType application/x-httpd-php .php Action php-fcgid /fcgid-bin/php-fcgid-wrapper ScriptAlias /fcgid-bin/ /srv/http/fcgid-bin/ SocketPath /var/run/httpd/fcgidsock SharememPath /var/run/httpd/fcgid_shm # If you don't allow bigger requests many applications may fail (such as WordPress login) FcgidMaxRequestLen 536870912 # Path to php.ini – defaults to /etc/phpX/cgi DefaultInitEnv PHPRC=/etc/php/ # Number of PHP childs that will be launched. Leave undefined to let PHP decide. #DefaultInitEnv PHP_FCGI_CHILDREN 3 # Maximum requests before a process is stopped and a new one is launched #DefaultInitEnv PHP_FCGI_MAX_REQUESTS 5000 <Location /fcgid-bin/> SetHandler fcgid-script Options +ExecCGI </Location> </IfModule>
- Uncomment the loading of the actions module:
LoadModule actions_module modules/mod_actions.so
- Load the FCGID module after the loading of the unixd module (on which it is dependent) - you may wish to place this within the
LoadModule fcgid_module modules/mod_fcgid.so
- Ensure that the inclusion of the MPM configuration is uncommented (it is uncommented in the default installed version of this file):
- Add an inclusion of your new FCGID configuration:
Using php-fpm and mod_proxy_fcgi
This method provides "an alternative PHP FastCGI implementation with some additional features (mostly) useful for heavy-loaded sites" .
ProxyPassMatch ^/(.*\.php(/.*)?)$ unix:/run/php-fpm/php-fpm.sock|fcgi://localhost/srv/http/$1
Enable proxy modules:
LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
/etc/httpd/conf/extra/php-fpm.conf with the following content:
DirectoryIndex index.php index.html <FilesMatch \.php$> SetHandler "proxy:unix:/run/php-fpm/php-fpm.sock|fcgi://localhost/" </FilesMatch>
And include it at the bottom of
fcgiis not allowed to be surrounded by a space!
localhostcan be replaced by any string. More here
You can configure PHP-FPM in
/etc/php/php-fpm.d/www.conf, but the default setup should work fine.
Test whether PHP works
To test whether PHP was correctly configured, create a file called
test.php in your Apache
DocumentRoot directory (e.g.
~<username>/public_html/) with the following contents:
<?php phpinfo(); ?>
Then go to http://localhost/test.php or http://localhost/~<username>/test.php as appropriate.
- While Apache supports unencrypted HTTP/2 over TCP (
h2c), common browsers do not. Thus for use with the latter, #TLS must be enabled first.
- If supporting clients do not use HTTP/2 instead of HTTP/1.1 and Mozilla's configuration generator (which already includes the
Protocolsline below) was used to setup #TLS, try
httpd-ssl.confafter the latter's output.
- Ways to test include
curl -sI https://your.websiteor use http indicator (supports both chromium based browsers and firefox based browsers).
To enable HTTP/2 over TLS support, uncomment the following line in
LoadModule http2_module modules/mod_http2.so
And add the following line:
Protocols h2 http/1.1
To debug, you can set only the module rather than the entire server to
<IfModule http2_module> LogLevel http2:info </IfModule>
For more information – including extra HTTP/2 feature settings – see the mod_http2 documentation.
http2_moduleis incompatible with the
mpm_prefork_modulethat old configurations widely use to setup PHP. Consider using php-fpm instead.
Apache Status and Logs
See the status of the Apache daemon with systemctl.
Apache logs can be found in
Error: PID file /run/httpd/httpd.pid not readable (yet?) after start
Comment out the
unique_id_module line in
#LoadModule unique_id_module modules/mod_unique_id.so
/run/httpd not being created at boot
systemd-tmpfiles --create as the root user complains about "unsafe path transition", check ownership of your root directory.
ls -la / chown root:root /
Apache is running a threaded MPM, but your PHP Module is not compiled to be threadsafe.
If when loading
httpd.service fails, you may get an error like this in the journal:
Apache is running a threaded MPM, but your PHP Module is not compiled to be threadsafe. You need to recompile PHP.
This is because PHP includes support for a module that is not threadsafe, and you are trying to use a threaded MPM. One solution to fix this is to use a non-threaded MPM. Try replacing
LoadModule mpm_event_module modules/mod_mpm_event.soLoadModule mpm_prefork_module modules/mod_mpm_prefork.so
http2_module, will disable themselves when
AH00534: httpd: Configuration error: No MPM loaded.
You might encounter this error after a recent upgrade. This is only the result of a recent change in
httpd.conf that you might not have reproduced in your local configuration. To fix it, uncomment the following line:
LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
AH00072: make_sock: could not bind to address
This can be caused by multiple things. Most common issue being that something is already listening on a given port, check via ss that this is not happening:
# ss -lnp | grep -e :80 -e :443
If you get any output, stop the given service that's taking up the port or kill the runaway process that is causing the port to be bound, and try again.
Another issue could be that Apache is not starting as root for some reason - try starting it manually and see if you still get the AH0072 error.
# httpd -k start
Finally, you can also have an error with your configuration and you are listening twice on the given port. Following is an example of a bad configuration that will trigger this issue:
Listen 0.0.0.0:80 Listen [::]:80
AH01071: Got error 'Primary script unknown'
This can be caused by
ProtectHome=true in the php-fpm systemd unit file if you are serving files in
/home such as in a virtual host environment. You can disable this feature by editing the php-fpm unit file and restarting
php-fpm.service. Alternatively, move your document root.
Changing the max_execution_time in php.ini has no effect
If you changed the
php.ini to a value greater than 30 (seconds), you may still get a
503 Service Unavailable response from Apache after 30 seconds. To solve this, add a
ProxyTimeout directive to your http configuration right before the
<FilesMatch \.php$> block:
PHP-FPM: errors are not being logged separately per virtual host
If you have multiple virtual hosts, it may be desirable to have each of them output their error logs to separate files (using the ErrorLog Apache directive). If this is not working for you, confirm that PHP-FPM is configured to log errors to syslog:
error_log = syslog
It is also possible that the pool configuration is overriding it. Ensure the following line is commented out:
;php_admin_value[error_log] = /var/log/fpm-php.www.log