Lenovo ThinkPad S540
This page outlines installation tips for Arch Linux on the Lenovo Thinkpad S540, and tips on getting the best setup, and known cavaets.
In the BIOS (press enter when the Lenovo Logo appears on screen):
- Disable Secure Boot
- Set Boot type to either Both (Legacy First) or Legacy Only (UEFI Installation has yet to be successful - but see comment below by a second S540 owner))
- With Windows 8.1 already on the system a dual boot uefi system with Windows 8.1 and Arch Linux works fine - tested with rEFInd as the boot manager. Not only must Secure Boot be switched off but Fastboot must be turned off from within Windows 8.1 prior to the installation of Arch Linux otherwise a hybrid sleep mode is entered when Windows shuts down. Care is needed during the installation of Arch Linux to add the necessary boot files to the existing ESP which needs to be included in the fstab partitions.
By default the system will not boot due to issues with the intel video chip.
/etc/default/grub and change
GRUB_CMDLINE_LINUX to the value
"intel.modeset=0" and re-run
This will fix the video bug.
Currently known cavets with Arch Linux on the s540 are:
- Touch screen sometimes does not re-activate after system is placed in sleep mode (requires reboot)
- Default soft-buttons on the touch pad do not match the markings.This page outlines installation tips for Arch Linux on the Lenovo Thinkpad S540, and tips on getting the best setup, and known cavaets.