Talk:Framework Laptop

From ArchWiki

MicroSD/HDMI Support

Updated MicroSD and HDMI to Yes, as both work for me without adjustment on 5.13.13. However, I'm new to both Arch and the wiki, so if there's more concrete testing that needs to be done, just let me know and I'm happy to do it! HDMI and MicroSD happen to be the two cards I have besides USB-C. Jwisser (talk) 19:27, 3 September 2021 (UTC)

s2idle vs s3 suspend. S3 not supported on Tiger Lake?

So according to some sources (namely Jeremy Soller, Principal Engineer at System76), the Tiger Lake CPUs shipped in the Framework Laptop do not support S3 suspend. While S3 suspend does appear to work, this is probably the reason why the kernel chooses s2idle by default. Investigation is needed to determine whether s2idle is fully functional.

HappyMan (talk) 02:12, 17 September 2021 (UTC)HappyMan

Machine Motherboard Versions

The motherboards section mentioned that there should be a way to identify which motherboard model and/or revision is used. I found that inxiAUR reports both by running inxi -Mxxx (you can also just call dmidecode), but I'm not sure how these values vary across laptop configs.

Colorwheel (talk) 19:35, 2 October 2021 (UTC)

Not sure if discussion is best place for this or if we should just add it to the table, but let's find out. dmidecode -t 2) will show just Base Board information (although it needs superuser perms to run where inxi doesn't). Mine is a

Batch 5 i7-1185G7

Product Name: FRANBMCP08

Version: A8

Tgm4883 (talk) 23:38, 16 November 2021 (UTC)

BootManager

Hey,

I used `dd` to install an arch linux usb stick, and the Framework laptop's bootloader recognizes the efi partition but when I load it, it flashes a black screen; no error then goes back to the bootloader. Do you think it is my laptop unable to load systemd-boot or grub or is it the laptop or ram?

I tested the ram with the BIOS and there were no errors.

Has anybody else had issues with the bootmanagers and using the bootloader?

Solution

I realized I needed to disable secure boot. I will add to the wiki. Tsangares (talk) 20:09, 25 October 2021 (UTC)

Display

The monitor is 2256 x 1504 (3:2 ratio) and 13.5 inches diagonally (product page). Which is ~11.2 inches horizontally and ~7.5 inches vertically making for a DPI of ~201.

A similar display with a horizontal resolution of 1920px would have a horizontal DPI of ~171.

TylerSzabo (talk) 20:55, 26 January 2022 (UTC)

Again a regression on iwlwifi for AX210 5.16.11 ?

Edit: it looks like with on Linux 5.16.12-arch1-1 it seems back.

kernel: 5.16.11-arch1-2, tested with stable linux-firmware and linux-firmware-git:

[    9.102715] iwlwifi 0000:aa:00.0: WRT: Collecting data: ini trigger 13 fired (delay=0ms).                                                                                     
[    9.102823] iwlwifi 0000:aa:00.0: Loaded firmware version: 67.8f59b80b.0 ty-a0-gf-a0-67.ucode                                                                                 
[    9.102824] iwlwifi 0000:aa:00.0: 0x00000000 | ADVANCED_SYSASSERT                                                                                                            
[    9.102825] iwlwifi 0000:aa:00.0: 0x00000000 | trm_hw_status0                                                                                                                 
[    9.102825] iwlwifi 0000:aa:00.0: 0x00000000 | trm_hw_status1                                                                                                                
[    9.102826] iwlwifi 0000:aa:00.0: 0x00000000 | branchlink2                                                                                                                   
[    9.102826] iwlwifi 0000:aa:00.0: 0x00000000 | interruptlink1                                                                                                                 
[    9.102827] iwlwifi 0000:aa:00.0: 0x00000000 | interruptlink2                                                                                                                 
[    9.102827] iwlwifi 0000:aa:00.0: 0x00000000 | data1                                                                                                                          
[    9.102828] iwlwifi 0000:aa:00.0: 0x00000000 | data2                                                                                                                          
[    9.102828] iwlwifi 0000:aa:00.0: 0x00000000 | data3                                                                                                                          
[    9.102829] iwlwifi 0000:aa:00.0: 0x00000000 | beacon time                                                                                                                    
[    9.102829] iwlwifi 0000:aa:00.0: 0x00000000 | tsf low                                                                                                                        
[    9.102830] iwlwifi 0000:aa:00.0: 0x00000000 | tsf hi                                                                                                                         
[    9.102830] iwlwifi 0000:aa:00.0: 0x00000000 | time gp1                                                                                                                       
[    9.102831] iwlwifi 0000:aa:00.0: 0x00000000 | time gp2                                                                                                                      
[    9.102831] iwlwifi 0000:aa:00.0: 0x00000000 | uCode revision type                                                                                                             
[    9.102832] iwlwifi 0000:aa:00.0: 0x00000000 | uCode version major 
[    9.102832] iwlwifi 0000:aa:00.0: 0x00000000 | uCode version minor                                                                                                             
[    9.102833] iwlwifi 0000:aa:00.0: 0x00000000 | hw version                                                                                                                     
[    9.102833] iwlwifi 0000:aa:00.0: 0x00000000 | board version                                                                                                                   
[    9.102834] iwlwifi 0000:aa:00.0: 0x00000000 | hcmd                                                                                                                           
[    9.102834] iwlwifi 0000:aa:00.0: 0x00000000 | isr0                                                                                                                           
[    9.102835] iwlwifi 0000:aa:00.0: 0x00000000 | isr1                                                                                                                           
[    9.102835] iwlwifi 0000:aa:00.0: 0x00000000 | isr2                                                                                                                           
[    9.102836] iwlwifi 0000:aa:00.0: 0x00000000 | isr3                                                                                                                           
[    9.102836] iwlwifi 0000:aa:00.0: 0x00000000 | isr4                                                                                                                           
[    9.102837] iwlwifi 0000:aa:00.0: 0x00000000 | last cmd Id                                                                                                                     
[ 9.102837] iwlwifi 0000:aa:00.0: 0x00000000 | wait_event   
9.102838] iwlwifi 0000:aa:00.0: 0x00000000 | l2p_control                                                                                                                     
[    9.102838] iwlwifi 0000:aa:00.0: 0x00000000 | l2p_duration                                                                                                                   
[    9.102839] iwlwifi 0000:aa:00.0: 0x00000000 | l2p_mhvalid                                                                                                                  [ 
[  9.102839] iwlwifi 0000:aa:00.0: 0x00000000 | l2p_addr_match                                                                                                                   
[    9.102840] iwlwifi 0000:aa:00.0: 0x00000000 | lmpm_pmg_sel
[    9.102840] iwlwifi 0000:aa:00.0: 0x00000000 | timestamp                                                                                                                     
[    9.102841] iwlwifi 0000:aa:00.0: 0x00000000 | flow_handler
[    9.102915] iwlwifi 0000:aa:00.0: Start IWL Error Log Dump:
[    9.102916] iwlwifi 0000:aa:00.0: Transport status: 0x00000042, valid: 7
[    9.102917] iwlwifi 0000:aa:00.0: 0x201013F2 | ADVANCED_SYSASSERT
[    9.102917] iwlwifi 0000:aa:00.0: 0x00000000 | umac branchlink1
[    9.102918] iwlwifi 0000:aa:00.0: 0x8045E20E | umac branchlink2
[    9.102919] iwlwifi 0000:aa:00.0: 0x00000000 | umac interruptlink1
[    9.102919] iwlwifi 0000:aa:00.0: 0x00000000 | umac interruptlink2
[    9.102920] iwlwifi 0000:aa:00.0: 0x0000000C | umac data1
[    9.102920] iwlwifi 0000:aa:00.0: 0x00040000 | umac data2
[    9.102921] iwlwifi 0000:aa:00.0: 0xDEADBEEF | umac data3
[    9.102921] iwlwifi 0000:aa:00.0: 0x00000043 | umac major
[    9.102922] iwlwifi 0000:aa:00.0: 0x8F59B80B | umac minor
[    9.102922] iwlwifi 0000:aa:00.0: 0x00011F6F | frame pointer                                                                                                                 
[    9.102923] iwlwifi 0000:aa:00.0: 0xC0887F34 | stack pointer
[    9.102923] iwlwifi 0000:aa:00.0: 0x00000000 | last host cmd
[    9.102924] iwlwifi 0000:aa:00.0: 0x00000000 | isr status reg
[    9.102973] iwlwifi 0000:aa:00.0: IML/ROM dump:
[    9.102974] iwlwifi 0000:aa:00.0: 0x00000B03 | IML/ROM error/state
[    9.102985] iwlwifi 0000:aa:00.0: 0x0000762F | IML/ROM data1
[    9.102995] iwlwifi 0000:aa:00.0: 0x00000080 | IML/ROM WFPM_AUTH_KEY_0

Gbin (talk) 18:37, 2 March 2022 (UTC)

I am running a ax210 on `Linux taxi 5.16.11-arch1-1 #1 SMP PREEMPT Thu, 24 Feb 2022 02:18:20 +0000 x86_64 GNU/Linux` `Bus 003 Device 004: ID 8087:0032 Intel Corp. AX210 Bluetooth` Let me know how I can help you.

--Tsangares (talk) 00:15, 4 March 2022 (UTC)

Facial Recognition

I am setting up facial recognition and I am trying to make a wiki entry. But I am having difficulties.

Install howdy for facial recognition. It works with /dev/video0 - the normal camera but fails with the IR camera /dev/video1. I installed linux-enable-ir-emitterAUR and ran linux-enable-ir-emitter configure -d /dev/video1 to recieve the output,

INFO: Warning to do not kill the process !
[ WARN:0@0.141] global /build/opencv/src/opencv-4.5.5/modules/videoio/src/cap_gstreamer.cpp (2401) handleMessage OpenCV | GStreamer warning: Embedded video playback halted; module source reported: Could not read from resource.
[ WARN:0@0.141] global /build/opencv/src/opencv-4.5.5/modules/videoio/src/cap_gstreamer.cpp (1356) open OpenCV | GStreamer warning: unable to start pipeline
[ WARN:0@0.141] global /build/opencv/src/opencv-4.5.5/modules/videoio/src/cap_gstreamer.cpp (862) isPipelinePlaying OpenCV | GStreamer warning: GStreamer: pipeline have not been created
CRITICAL: Cannot access to /dev/video1.

Does anybody know how to get the IR working on framework laptop? --Tsangares (talk) 22:56, 11 March 2022 (UTC)

I don't think framework has an IR camera, it has an IR filter lens but I dont think it can recieve an IR signal -- Keloran

Please add HiDPI section back

It was removed here: https://wiki.archlinux.org/index.php?title=Framework_Laptop&type=revision&diff=719571&oldid=719553

I added that section precisely because it was distilled from the considerably long HiDPI section. The point of what I wrote was to save others the time of having to navigate through the HiDPI page and configure the settings specifically for this laptop (which is a little weird given that you generally want 1.5 scaling). --Burntsushi 10:31, 19 May 2022 (EDT)