User:Xhudik

HP ZBook Firefly 14 G10 A

Hardware	PCI/USB ID	Working?
Touchpad		Yes
Keyboard		Yes
GPU	`8086:3ea0`	Yes
Webcam	`1bcf:2b98`	Yes
Ethernet	`10ec:8168`	Yes
Bluetooth	`8087:0aaa`	Yes
SD-card reader	`8086:9dc4`	Yes
Audio	`8086:9dc8`	Yes
Wireless	`8086:9df0`	Yes
Fingerprint reader	`27c6:530c`	Untested
TPM		Untested

Installation

This laptop worked out of the box (easy installation via WiFi - no special setup)

Firmware

Note: This device does not have a BIOS speaker and uses the built-in speakers instead. Beeps can be louder than expected.

Secure Boot

The BIOS accepts .auth files and supports custom keys well.

Fingerprint reader

Not tested

Bluetooth

Bluetooth works out of the box. Just do not forget to enable systemd service (systemctl enable bluetooth.service)

Power management

After waking up the device from suspend, input lag will occur for approximately 5-10 seconds. Sometimes it will even repeat a key press for up to 32 times but only within this timespan. There is no known fix for this.

Power buttons

This article or section is a candidate for merging with Help:Laptop page guidelines#Capturing function keys.

Notes: This section and the next one duplicate the explanation of how to capture keys. They seem to have been copied and pasted blindly on many other laptop pages since this one is cited as a reference in Help:Laptop page guidelines. (Discuss in User talk:Xhudik)

This device has two detected power buttons and one sleep button.

$ loginctl seat-status

├─/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
│ input:input3 "Power Button"
├─/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
│ input:input6 "Video Bus"
├─/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
│ input:input1 "Power Button"
├─/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
│ input:input0 "Lid Switch"
├─/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
│ input:input2 "Sleep Button"
[...]

In this case, LNXPWRBN:00 (/dev/input/event3) is the "real", physical power button. You can verify this by inhibiting the handling of the power button

# systemd-inhibit --what=handle-power-key sleep 1h

and recording the events:

# stdbuf -o0 evemu-record /dev/input/event3 > event3

Pressing the power button should log an event.

The other detected power button seems to be a virtual, firmware-handled button. This power button will be triggered when your device runs out of battery. The firmware will send many power button presses, so your machine will most likely only take a few seconds to power off because systemd kills the process/unit it is waiting for when the power button is pressed.

See logind.conf(5) for more information on handling specific keys.

Sleep button

There is also a sleep button/suspend key. It is a virtual, firmware-handled key and will be triggered when using one of the #Unmarked keybinds, which would suspend your device. Use this to inhibit the handling of the suspend key.

# systemd-inhibit --what=handle-suspend-key sleep 1h

Function keys

Key	Visible?¹	Marked?²	Effect
`Fn+Esc`	No	Yes	Enables Fn lock
`Fn+F1`	Yes	Yes	`XF86AudioMute`
`Fn+F2`	Yes	Yes	`XF86AudioLowerVolume`
`Fn+F3`	Yes	Yes	`XF86AudioRaiseVolume`
`Fn+F4`	Yes	Yes	`XF86AudioPrev`
`Fn+F5`	Yes	Yes	`XF86AudioPlay`
`Fn+F6`	Yes	Yes	`XF86AudioNext`
`Fn+F7`	No	No	See #Unmarked keybinds
`Fn+F8`	Yes	Yes	Inputs `Super+p`
`Fn+F9`	Yes	Yes	`XF86Search`
`Fn+F10`	No	Yes	Enables/disables keyboard backlight
`Fn+F11`	Yes	Yes	`XF86MonBrightnessDown`
`Fn+F12`	Yes	Yes	`XF86MonBrightnessUp`
`Fn+Print`	Yes³	Yes	`XF86RFKill`, will hard-block wifi and soft-block Bluetooth. Press again to disable
`Fn+Ins`	Yes³	No	`XF86Sleep`, see #Unmarked keybinds
`Fn+NumPad0`	Yes³	No	`XF86Sleep`, see #Unmarked keybinds
`Fn+q`, `Fn+w`, `Fn+e`	Yes	No	`XF86Launch3`
`Fn+t`, `Fn+a`, `Fn+d`	Yes	No	`XF86Launch3`
`Fn+f`, `Fn+g`	Yes	No	`XF86Launch3`
`Fn+r`	Yes	No	`Print`
`Fn+s`	Yes	No	`Scroll_Lock`
`Fn+b`	Yes	No	`Pause`
`Fn+Up`	Yes	No	`Prior`
`Fn+Down`	Yes	No	`Next`
`Fn+Left`	Yes	No	`Home`
`Fn+Right`	Yes	No	`End`
`Fn+KP_Multiply`	Yes³	No	`XF86RFKill`

The key is visible to xev and similar tools
The physical key has a symbol on it, which describes its function
systemd-logind handles this by default

Unmarked keybinds

There are several keybinds handled by the BIOS:

Key	Effect
`Fn+F7`	Unobtrusive mode. Has to be enabled in the BIOS in order to work. Deactivates all LEDs and turns off display and sound. Press again to disable.
`Fn+Ins`	Suspends device. See #Sleep button. Can not be disabled/configured
`Fn+NumPad0`	Same as `Fn+Ins`[1]. May be an unintended feature