ASUS E402S

From ArchWiki
Jump to navigation Jump to search
Hardware PCI/USB ID Working?
Wireless 168c:0036 Yes
Sound 8086:2284 Yes
Bluetooth 13d3:3423 Untested
Touchpad 0b05:0101 Yes
Graphics 10ec:8136 Yes
USB 8086:22b5 Yes
Webcam 04f2:5b2b Yes
Card Reader 10ec:5286 Untested
HDMI Untested
Battery Yes
VESA Untested
Ethernet 10ec:8136 Untested
Function Keys Yes

Hardware

E402S

  • Processor: Intel Pentium N3060 1.60 GHz (2.48 GHz max)
  • Display: 14.0", 1920x1080
  • Graphics: Integrated Intel(R) HD Graphics 400 (Braswell)
  • SSD: 32GB eMMC
  • Memory: 4 GiB
  • Card Reader: Realtek RTS5286 PCI Express Card Reader (SD)
  • Webcam: Chicony Electronics USB2.0 VGA UVC WebCam 640x480
  • WLAN: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter
  • Bluetooth: IMC Networks Bluetooth Device
  • Touchpad: Asus TouchPad

Installation

Firmware

This device is supported by fwupd.

Secure Boot

In order to boot any Linux operating system, navigate to BIOS, using escape, then the "Security" tab and set "SecureBoot" to Off.

Video

See Intel Graphics and/or Early KMS start.

Either install xf86-video-intel, or enable early KMS.

Or, a possibly better alternative, start kernel modesetting during the initramfs stage. To do this, you can just add the i915 module to /etc/mkinitcpio.conf} like this:

/etc/mkinitcpio.conf
MODULES=(i915)

And then run:

# mkinitcpio -p linux

Finally, reboot.

Video playback

See Hardware video acceleration.

mpv is very slow on this system, until installing libva-intel-drivers[broken link: package not found] and setting in your mpv.conf

mpv.conf
hwdec=vaapi

Touchpad

See Libinput.

Function Keys

Working fine with Arch.

Key Visible?1 Marked?2 Effect
Fn+F1 Yes Yes XF86Sleep3
Fn+F2 Yes Yes XF86RFKill3
Fn+F3 Yes No XF86Mail
Fn+F4 Yes No XF86WWW
Fn+F5 Yes Yes XF86MonBrightnessDown
Fn+F6 Yes Yes XF86MonBrightnessUp
Fn+F7 Yes Yes XF86ScreenSaver
Fn+F8 unknown
Fn+F9 Yes Yes XF86TouchpadToggle
Fn+F10 Yes Yes XF86AudioMute
Fn+F11 Yes Yes XF86AudioLowerVolume
Fn+F12 Yes Yes XF86AudioRaiseVolume
  1. The key is visible via xev(1) (part of xorg-xev), wevAUR on Wayland, and similar tools
  2. The physical key has a symbol on it, which describes its function
  3. Fn+F1 and Fn+F2 work without configuration, the others need to be configured in the window manager.