Frequently asked questions
- 1 General
- 1.1 What is Arch Linux?
- 1.2 Why would I not want to use Arch?
- 1.3 What architectures does Arch support?
- 1.4 Does Arch follow the Linux Foundation's Filesystem Hierarchy Standard (FHS)?
- 1.5 I am a complete GNU/Linux beginner. Should I use Arch?
- 1.6 Is Arch designed to be used as a server? A desktop? A workstation?
- 1.7 I really like Arch, except the development team needs to implement feature X
- 1.8 How can I become an Arch Developer?
- 1.9 How can I become a Trusted User?
- 1.10 What can I do as an artist?
- 1.11 When will the new release be made available?
- 1.12 Is Arch Linux a stable distribution? Will I get frequent breakage?
- 1.13 Arch needs more press (i.e. advertisement)
- 1.14 Arch needs more developers
- 1.15 Why is my internet so slow compared to other operating systems?
- 1.16 Why is Arch using all my RAM?
- 1.17 Where did all my free space go?
- 2 Package management
- 2.1 I have found an error with package X. What should I do?
- 2.2 Arch packages need to use a unique naming convention. ".pkg.tar.gz" and ".pkg.tar.xz" are too long and/or confusing
- 2.3 Pacman needs a library so other applications can easily access package information
- 2.4 Pacman needs feature X!
- 2.5 I just installed Package X. How do I start it?
- 2.6 Why is there only a single version of each shared library in the official repositories?
- 2.7 What if I run a full system upgrade and there will be an update for a shared library, but not for the apps that depend on it?
- 2.8 Is it possible that there is a major kernel update in the repository, and that some of the driver packages have not been updated?
- 2.9 What to do before upgrading?
- 2.10 A package update was released, but pacman says the system is up to date
- 2.11 Upstream project X has released a new version. How long will it take for the Arch package to update to that new version?
- 2.12 If I need an older version of an installed library, can I just symlink to the newer version?
- 3 Installation
- 4 64-bit
What is Arch Linux?
See the Arch Linux article.
Why would I not want to use Arch?
You may not want to use Arch, if:
- you do not have the ability/time/desire for a 'do-it-yourself' GNU/Linux distribution.
- you require support for an architecture other than x86_64.
- you take a strong stand on using a distribution which only provides free software as defined by GNU.
- you believe an operating system should configure itself, run out of the box, and include a complete default set of software and desktop environment on the installation media.
- you do not want a rolling release GNU/Linux distribution.
- you are happy with your current OS.
What architectures does Arch support?
Does Arch follow the Linux Foundation's Filesystem Hierarchy Standard (FHS)?
Arch Linux follows the file system hierarchy for operating systems using the systemd service manager. See for an explanation of each directory along with their designations. In particular,
/usr/sbin are symbolic links to
/lib64 are symbolic links to
I am a complete GNU/Linux beginner. Should I use Arch?
If you are a beginner and want to use Arch, you must be willing to invest time into learning a new system, and accept that Arch is designed as a 'do-it-yourself' distribution; it is the user who assembles the system.
Before asking for help, do your own independent research by Googling, searching the forum and the superb documentation provided by the Arch Wiki. There is a reason these resources were made available to you in the first place. Many thousands of volunteered hours have been spent compiling this excellent information.
Is Arch designed to be used as a server? A desktop? A workstation?
Arch is not designed for any particular type of use. Rather, it is designed for a particular type of user. Arch targets competent users who enjoy its 'do-it-yourself' nature, and who further exploit it to shape the system to fit their unique needs. Therefore, in the hands of its target user base, Arch can be used for virtually any purpose. Many use Arch on both their desktops and workstations. And of course, archlinux.org, aur.archlinux.org and almost all of Arch's infrastructure runs on Arch.
I really like Arch, except the development team needs to implement feature X
Get involved, contribute your code/solution to the community. If it is well regarded by the community and development team, perhaps it will be merged. The Arch community thrives on contribution and sharing of code and tools.
How can I become an Arch Developer?
The main motivation for your work on Arch should be helping the whole community, and not simply trying to become an Arch developer by any means.
Usually, new developers are picked by the existing developers as the workload increases. Sometimes they post a position and you can apply to fill it, but more often, they just invite somebody they know would be good at it and would fit in well with the rest of the team. Having a portfolio of Arch contributions is the best way to make it on the team.
Here is a list of things that you may do in order to gain some "popularity" towards Arch's developers:
- Establish a reputation as being helpful by offering assistance whenever possible.
- Answer questions on the forum, IRC, and mailing lists.
- Join the Trusted Users to gain packaging experience to show your skills.
- Submit packages to the AUR.
- Join one of the offshoot projects that may be incorporated into Arch mainstream someday, or start your own.
- Work on pacman, makepkg or other Arch projects and submit patches to the bug tracker.
- Traverse the bug tracker and fix existing bugs.
- Find and submit new bugs.
- Fix wiki errors, add new pages, clean up existing pages, and make sure the procedures are up-to-date.
- Submit translations.
How can I become a Trusted User?
Please read Trusted Users#How do I become a TU?.
What can I do as an artist?
Feel free to share wallpapers, splash screens, color palettes, widgets, themes, etc. with the community on the art subforum.
See also Arch Linux Art.
When will the new release be made available?
Arch Linux releases are simply a live environment for installation or rescue, which include the meta package and a few other packages. The releases are issued usually in the first half of every month.
Is Arch Linux a stable distribution? Will I get frequent breakage?
It is the user who is ultimately responsible for the stability of their own rolling release system. The user decides when to upgrade, and merges necessary changes when required. If the user reaches out to the community for help, it is often provided in a timely manner. The difference between Arch and other distributions in this regard is that Arch is truly a 'do-it-yourself' distribution; complaints of breakage are misguided and unproductive, since upstream changes are not the responsibility of Arch devs.
See the System maintenance article for tips on how to make an Arch Linux system as stable as possible.
Arch needs more press (i.e. advertisement)
Arch gets plenty of press as it is. The goal of Arch Linux is not to be large; rather, organic, sustainable growth occurs naturally amongst the target user base.
Arch needs more developers
Possibly so. Feel free to volunteer your time! Visit the forums, IRC channels, and mailing lists, and see what needs to be done. Getting involved in the Community Contributions subforum is a good way to start.
Why is my internet so slow compared to other operating systems?
Is your network configured correctly? Have a look at the Network configuration article.
Also note that Arch Linux does not come with traffic shaping enabled. Thus, it is possible that if a program on it somehow utilizes your internet connection to the full – regardless if it is over P2P or classic client-server connections – other local ones will find it clogged, resulting in severe lags and timeouts. Relief can be provided by firewalls such as Shorewall or Vuurmuur; there are also static scripts for (such as this derivative of Wondershaper), which allow shaping on the network layer.
Why is Arch using all my RAM?
Essentially, unused RAM is wasted RAM.
Many new users notice how the Linux kernel handles memory differently than they are used to. Since accessing data from RAM is much faster than from a storage drive, the kernel caches recently accessed data in memory. The cached data is only cleared when the system begins to run out of available memory and new data needs to be loaded.
We could distinguish the difference from
$ free -h
total used free shared buff/cache available Mem: 2.8Gi 1.1Gi 283Mi 224Mi 1.4Gi 1.2Gi Swap: 3.0Gi 881Mi 2.1Gi
It is important to note the difference between "free" and "available" memory. In the above example, a laptop with 2.8 GiB of total RAM appears to be using most of it, with only 283 MiB as free memory. However, 1.4 GiB of it is "buff/cache". There is still 1.2 GiB available for starting new applications, without swapping. Seefor details. The result of all this? Performance!
Where did all my free space go?
The answer to this question depends on your system. There are some fine utilities that may help you find the answer.
I have found an error with package X. What should I do?
First, you need to figure out if this error is something the Arch team can fix. Sometimes it is not (e.g. Firefox crashes may be the fault of the Mozilla team); this is called an upstream error. If it is an Arch problem, there is a series of steps you can take:
- Search the forums for information. See if anyone else has noticed it.
- Post a bug report with detailed information at https://bugs.archlinux.org.
- If you would like, write a forum post detailing the problem and the fact that you have reported it already. This will help prevent a lot of people from reporting the same error.
Arch packages need to use a unique naming convention. ".pkg.tar.gz" and ".pkg.tar.xz" are too long and/or confusing
This has been discussed on the Arch mailing list. Some proposed a .pac file extension, but there is no plan to change the package extension. As Tobias Kieslich, one of the Arch developers, put it, "A package is a gzipped [xz] tarball! And it can be opened, investigated and manipulated by any tar-capable application. Moreover, the mime-type is automatically detected correctly by most applications."
Pacman needs a library so other applications can easily access package information
Pacman is a front-end to—the "Arch Linux Package Management" library—which allows alternative front-ends, like a GUI front-end, to be written.
Pacman needs feature X!
However, the best way to get a feature added to pacman or Arch Linux is to implement it yourself. The patch or code may or may not be officially accepted, but perhaps others will appreciate, test and contribute to your effort.
I just installed Package X. How do I start it?
If you are using a desktop environment like KDE or GNOME, the program should automatically show up in your menu. If you are trying to run the program from a terminal and do not know the binary name, use:
$ pacman -Qlq package_name | grep /usr/bin/
Several distributions, such as Debian, have different versions of shared libraries packaged as different packages:
libfoo3 and so on. In this way it is possible to have applications compiled against different versions of
libfoo installed on the same system.
In case of a distribution like Arch, only the latest stable versions of packages are officially supported. By dropping support for outdated software, package maintainers are able to spend more time ensuring that the newest versions work as expected. As soon as a new version of a shared library becomes available from upstream, it is added to the repositories and affected packages are rebuilt to use the new version.
This scenario should not happen at all. Assuming an application called
foobaz is in one of the official repositories and builds successfully against a new version of a shared library called
libbaz, it will be updated along with
libbaz. If, however, it does not build successfully,
foobaz package will have a versioned dependency (e.g. libbaz 1.5), and will be removed by pacman during
libbaz upgrade, due to a conflict.
foobaz is a package that you built yourself and installed from AUR, you should try rebuilding
foobaz against the new version of
libbaz. If the build fails, report the bug to the
Is it possible that there is a major kernel update in the repository, and that some of the driver packages have not been updated?
No, it is not possible. Major kernel updates (e.g. linux 3.5.0-1 to linux 3.6.0-1) are always accompanied by rebuilds of all supported kernel driver packages. On the other hand, if you have an unsupported driver package installed on your system, such asAUR, then a kernel update might break things for you if you do not rebuild it for the new kernel. Users are responsible for updating any unsupported driver packages that they have installed.
What to do before upgrading?
Follow the System maintenance#Upgrading the system section.
A package update was released, but pacman says the system is up to date
pacman mirrors are not synced immediately. It may take over 24 hours before an update is available to you. The only options are be patient or use another mirror. MirrorStatus can help you identify an up-to-date mirror.
Upstream project X has released a new version. How long will it take for the Arch package to update to that new version?
Package updates will be released when they are ready. The specific amount of time can be as short as a few hours after upstream releases a minor bugfix update to as long as several weeks after a large package group's major update. The amount of time from an upstream's new version to Arch releasing a new package depends on the specific packages and the availability of the package maintainers. Additionally, some packages spend some time in the testing repository, so this can prolong the time before a package is updated. Package maintainers attempt to work quickly to bring stable updates to the repositories. If you find a package in the official repositories that is out of date, go to that package's page at the package website and flag it.
If you are lucky, it might work, for a time. Regardless, it is not a proper solution, because:
- Libraries do not change versions randomly - the API/ABI will have likely changed (possibly with bits removed), and whether those changes affect the usage is just a matter of luck.
- The symlink would be untracked by a package manager. Newbies who immediately try to hack on system library files are in the greatest risk of making an unwanted change that they cannot diagnose/fix, which a package manager helps to guard against.
- A slight alternative of dumping the old library file into the filesystem, untracked, would be forgotten about, and not have potential security bugs noticed/patched.
Instead, e.g. use/write a compat package, which provides the required library version.
Arch needs an installer. Maybe a GUI installer?
Since installation does not occur often (read the rest of this article to know more about what rolling release means), it is not a high priority for developers or users. The Installation guide has been fully updated to use the command-line method.
I installed Arch, and now I am at a shell! What now?
Which desktop environment or window manager should I use?
What makes Arch unique amongst other "minimal" distributions?
How do I determine if my processor is x86_64 compatible?
$ grep -w lm /proc/cpuinfo
Under Windows, using the freeware CPU-Z helps determine whether your CPU is 64-bit compatible. CPUs with AMD's instruction set "AMD64" or Intel's solution "EM64T" should be compatible with the x86_64 releases and binary packages.
It is faster under most circumstances and as an added bonus also inherently more secure due to the nature of Address space layout randomization (ASLR) in combination with Position-independent code (PIC) and the NX Bit which is not available in the stock i686 kernel due to disabled PAE. If your computer has more than 4GB of RAM, only a 64-bit OS will be able to fully utilize it.
Programmers also increasingly tend to care less about 32-bit ("legacy") as "new" x86 CPUs typically support the 64-bit extensions.
There are many more reasons we could list here to tell you to avoid 32-bit, but between the kernel, userspace and individual programs it is simply not viable to list every last thing that 64-bit does much better these days.