HASEE K650D i7 D3

From ArchWiki
Jump to navigation Jump to search

The HASEE K650D-i7-D3 is a powerful laptop, on which Arch-Linux runs fine. For a light-weight window manager, some additional configuration should be setup.

Touchpad synaptics

xf86-input-synaptics should be installed for a light-weight window manager (but not Gnome or KDE). In some cases, addition configuration is necessary for single-click, double-click and middle-click:

Section "InputClass"
    Identifier "touchpad"
    Driver "synaptics"
    MatchIsTouchpad "on"
        Option "TapButton1" "1"
        Option "TapButton2" "3"
        Option "TapButton3" "2"

For details, see Touchpad Synaptics.


Hot keys for backlight might not work after installation of Arch-Linux, so xorg-xbacklight is necessary for backlight configuration. See Backlight#xbacklight.

Video cards

Install bumblebee along with Nvidia and Intel drivers. nvidia-dkms is recommended for auto configuration after kernel updates. Acceleration mode of the Intel video card should be changed to "uxa", according to Intel graphics#SNA issues[broken link: invalid section], so that firefox will not fail to scroll smoothly, and 3D games will run normally.


After regular sound check, additional configuration should be conducted. Run aplay -l to find default build-in Audio Analog Stereo. In current machine, you can find the card ID with 1 and the device ID with 0. Then following configuration file can be created as following:

defaults.pcm.card 1
defaults.pcm.device 0
defaults.ctl.card 1

After that, run alsamixer to unmute.


The webcam is supported fully by default. MPlayer or FFmpeg can be used for test.

Software access point

A Wi-Fi access point can be created in this computer following Software access point. However, WPA/WPA2 will not work properly in channel 1 ~ 9, so channel must be set at 10 or more in the configuration:


See also

  • Laptop
  • Microcode should be installed for cpu.
  • UEFI/GPT mode is recommended for a rapid boot process; the default boot logo can be hidden under UEFI.
  • Micphone should be set to 0, and webcam should be covered for potential risk.