Input Japanese using uim

From ArchWiki

This article or section is a candidate for merging with uim.

Notes: Move language-independent content to uim and Japanese-specifics to Localization/Japanese. (Discuss in Talk:Input Japanese using uim)

This page explains how to get the Japanese input to work using uim.

If you use SCIM, see Smart Common Input Method platform.

If you use IBus, see IBus.

Installation

You need the following packages to input Japanese.

  • Japanese fonts
  • Japanese input method (Kana to Kanji conversion engine)
  • Input method framework: uim

Japanese fonts

see also Fonts and Font configuration for configuration or more detail.

Recommended Japanese fonts are as follows.

Sans-serif

Open-source OTF fonts developed by Adobe.

Serif and Sans-serif

An open source OTF font set including sans-serif (Gothic) and serif (Mincho) glyphs provided by Information-technology Promotion Agency, Japan (IPA).

If you want to show 2channel Shift JIS art properly, use the following fonts:

uim

Install the uimAUR package.

Input method

Anthy

Anthy is one of the most popular Japanese input methods in the open source world. However, it has not been maintained for a long time. Debian succeeds it from May 2010.

Install anthy from the official repositories.

Extra dictionary

Anthy's default dictionary does not include several characters which are not specified on EUC-JP (JIS X 0208) such as "①", "♥", etc. alt-cannadic provides extra dictionaries including those characters.

Get alt-cannadic dictionary and put them under your ~/.anthy/imported_words_default.d.

$ tar jxvf alt-cannadic-091230.tar.bz2
$ mkdir ~/.anthy/imported_words_default.d (if not exist)
$ cp alt-cannadic-091230/extra/*.t ~/.anthy/imported_words_default.d/

Please see official wiki for more detail (Japanese).

Warning: If you will be using this extra dictionary, choose Anthy (UTF-8) for default input method on uim.

Modified Anthy (anthy-ut)

Modified Anthy is a set of patches and huge extended dictionaries which aims to improve the Kana to Kanji conversion quality of original Anthy.

Modified Anthy consists two different upstreams:

  • Patched source of Anthy by G-HAL
  • Huge extended dictionalies by UTSUMI
Warning:
  • Modified Anthy applies to only Anthy (UTF-8). So you have to choose Anthy (UTF-8) for default input method on uim.
  • Modified Anthy does not have compatibility of the dictionaries and learning data with original Anthy.

Mozc

Mozc is a Japanese Input Method Editor (IME) designed for multi-platform such as Chromium OS, Windows, Mac and Linux which originates from Google Japanese Input.

Though MozcAUR adapts to only ibus input method framework, macuim provides uim-mozc plugin.

Mozc (Vanilla)

uim-mozcAUR is available on AUR.

Note: This does not support the kill_line feature of uim-mozc.

You can install this from the unofficial pnsft-pur user repository.

You can choose to install all packages in the mozc-im group by specifying the group name.

Or, specify the individual package names directly. For example install uim-mozcAUR.

mozc-ut

This article or section is out of date.

Reason: Package deleted and ut2 has been deprecated in favor of ut.[1] (Discuss in Talk:Input Japanese using uim)

mozc-ut2AUR[broken link: package not found] can be built uim-mozc.

Note: mozc-ut can work with uim-mozcAUR.

To build uim-mozc, edit PKGBUILD like follow, i,e. uncomment _uim_mozc= line:

## If you will not be using ibus, comment out below.
_ibus_mozc="yes"
## If you will be using uim, uncomment below.
_uim_mozc="yes"
## If applying patch for uim-mozc fails, try to uncomment below.
#_kill_kill_line="yes"
## This will disable the 'kill-line' function of uim-mozc.
Tip: If you will never be using ibus-mozc, comment out the _ibus_mozc= line.
Registering Mozc
Warning: You must run the following command whenever you upgrade or (re-)install uim.
# uim-module-manager --register mozc

Google CGI API for Japanese input

Google CGI API for Japanese Input (Google-CGIAPI-Jp) is CGI service to provide Japanese conversion on the Internet by Google. It can be used on web browser. Its conversion engine seems to be equivalent to Google Japanese Input, so conversion quality is probably better than Mozc.

Note: This service sends/receives preedits and candidates as plain text (as of 2012-09).

You can use it via uim. Choose "Google-CGIAPI-Jp" on uim-im-switcher-gtk/gtk3/qt4 or uim-pref-gtk/gtk3/qt4.

Settings

Environment variables

Autostart the following on Xorg startup:

export GTK_IM_MODULE='uim'
export QT_IM_MODULE='uim'
uim-xim &
export XMODIFIERS='@im=uim'
Note: The variables should be exported before starting your desktop environment, i.e. before "exec startxfce4" or similar. See below if you are using systemd to manage your X session.

Toolbar utilities

If you want to use UimToolbar utilities which shows and controls uim mode, add one of the followings, too.

uim-toolbar-gtk/qt

Using toolbar appears as a window.

For GTK 2:

uim-toolbar-gtk &

For GTK 3:

uim-toolbar-gtk3 &

For Qt4:

uim-toolbar-qt4 &

uim-toolbar-gtk-systray

Using toolbar for system tray.

For GTK 2:

uim-toolbar-gtk-systray &

For GTK 3:

uim-toolbar-gtk3-systray &

Using systemd

If you are using systemd to manage your X session, you will need to set the environment variables in your systemd session rather than an init script.

~/.config/systemd/user/uim-env.service
[Unit]
Description=uim environment initialization
Before=xorg.target

[Service]
Type=oneshot
ExecStart=/usr/bin/systemctl --user set-environment XMODIFIERS=@im=uim
ExecStart=/usr/bin/systemctl --user set-environment GTK_IM_MODULE=uim
ExecStart=/usr/bin/systemctl --user set-environment QT_IM_MODULE=uim
~/.config/systemd/user/uim.service
[Unit]
Description=uim daemon
Wants=uim-env.service
After=xorg.target

[Service]
ExecStart=/usr/bin/uim-xim
Restart=on-abort

[Install]
WantedBy=xorg.target
~/.config/systemd/user/uim-toolbar.service
[Unit]
Description=uim toolbar
PartOf=uim.service

[Service]
ExecStart=/usr/bin/uim-toolbar-of-your-choice
Restart=on-abort

[Install]
WantedBy=uim.service

Lastly, you will need to enable the uim.service and uim-toolbar.service user units.

uim preferences

Configure uim preferences by running :

$ uim-pref-gtk (Or, uim-pref-gtk3/uim-pref-qt4)

which brings forth a GUI.

Choose your preferring input method as 'Default input method'.

Note: Mozc will be not listed in 'Default input method' at first time so you will need to add it into 'Enabled input methods' to use.

You can run uim-xim or restart X to test your settings.

Provided everything went well you should be able to input Japanese in X.

Input Japanese on Emacs

uim provides uim.el the bridge software between Emacs and uim. Here is a sample to use uim on Emacs with utf-8 encoding.

Please see Official wiki for more detail.

LEIM or minor-mode

You can call uim.el from Emacs in two ways; directly or with the LEIM (Library of Emacs Input Method) framework. Though settings of them are different, basic functions are same. If you want to switch between uim.el and other Emacs IMs frequently, you should use LEIM framework.

Settings for the minor-mode

If you will be using on minor-mode, write the following settings into your .emacs.d/init.el or some other file for Emacs customizing.

;; read uim.el
(require 'uim)
;; uncomment next and comment out previous to load uim.el on-demand
;; (autoload 'uim-mode "uim" nil t)

;; key-binding for activate uim (ex. C-\)
(global-set-key "\C-\\" 'uim-mode)
Settings for the LEIM

If you will be using via LEIM, write the following settings into your .emacs.d/init.el or some other file for Emacs customizing and choose default input method.

;; read uim.el with LEIM initializing
(require 'uim-leim)

;; set default IM. Uncomment the one of the followings.
;(setq default-input-method "japanese-anthy-utf8-uim")        ; Anthy (UTF-8)
;(setq default-input-method "japanese-google-cgiapi-jp-uim")  ; Google-CGIAPI-Jp
;(setq default-input-method "japanese-mozc-uim")              ; Mozc

Preferred character encoding

uim.el uses euc-jp character encoding by default. To set UTF-8 as preferred encodings, add the followings into your .emacs.d/init.el or some other file for Emacs customizing.

;; Set UTF-8 as preferred character encoding (default is euc-jp).
(setq uim-lang-code-alist
      (cons '("Japanese" "Japanese" utf-8 "UTF-8")
           (delete (assoc "Japanese" uim-lang-code-alist) 
                   uim-lang-code-alist)))

Enable inline candidates displaying mode by default

The inline candidates displaying mode displays conversion candidates just below (or above) preedit text vertically instead of echo area. If you want to enable inline candidates displaying mode by default, write as follows.

;; set inline candidates displaying mode as default
(setq uim-candidate-display-inline t)

Set Hiragana input mode by default

To set Hiragana input mode at activting uim, add the settings like follows:

;; Set Hiragana input mode at activating uim.
(setq uim-default-im-prop '("action_anthy_utf8_hiragana"
                            "action_google-cgiapi-jp_hiragana"
                            "action_mozc_hiragana"))

Ignoring C-SPC on uim.el

When you are assigning activation/deactivation of input method to C-SPC, C-SPC is stolen to switch input mode by uim.el while it is activated. To prevent the stealing and use for set-mark-command, add the followings into your .emacs.d/init.el or some other file for Emacs customizing.

(add-hook 'uim-load-hook
          '(lambda ()
             (define-key uim-mode-map [67108896] nil)
             (define-key uim-mode-map [0] nil)))

Disabling XIM on Emacs

When you are using input method on your desktop and assigning activation/deactivation of input method to C-SPC, you will be not able to use C-SPC/C-@ as set-mark-command on Emacs. To avoid this problem, add the following into your ~/.Xresources or ~/.Xdefaults. xim will be disabled on Emacs.

Emacs*UseXIM: false

Troubleshooting

Set the GTK_IM_MODULE variable, but uim still does not work with GTK 2 applications

In case you already set the GTK_IM_MODULE environmental variable, but uim still does not work with GTK 2 applications, you need to specify the location of gtk.immodules, which is created by and can be generated with gtk-query-immodules-2.0.

The default location is /etc/gtk-2.0/gtk.immodules for GTK 2.

You can do this with either the GTK_IM_MODULE_FILE variable (not recommended, it causes GTK 3 applications to see incompatible modules) or the im_module_file setting (recommended).

Add the following to /etc/gtk-2.0/gtkrc or ~/.gtkrc-2.0:

 im_module_file "/etc/gtk-2.0/gtk.immodules"

Cannot input Japanese on Opera

If you use Opera and cannot input Japanese with uim, try to edit environment variable as follows: Make sure to add the following to the beginning of /usr/bin/opera.

export XMODIFIERS='@im=uim'
export QT_IM_MODULE='xim'

Cannot type a consonant in Zenkaku mode

If you cannot type a consonant in Zenkaku mode, add the following to your configuration file.

   e.g.  vi ~/.uim.d/customs/custom-google-cgiapi-jp.scm
    
   (define ja-rk-rule-hoge
   (map
   (lambda (c)
   (list (cons (list c) ()) (list c c c)))
   '("b" "c" "d" "f" "g" "h" "j" "k" "l" "m"
   "p" "q" "r" "s" "t" "v" "w" "x" "y" "z"
   "A" "B" "C" "D" "E" "F" "G" "H" "I" "J" "K" "L" "M"
   "N" "O" "P" "Q" "R" "S" "T" "U" "V" "W" "X" "Y" "Z")))
   (if (symbol-bound? 'ja-rk-rule-hoge)
   (set! ja-rk-rule (append ja-rk-rule-hoge ja-rk-rule)))

uim-toolbar-gtk-systray: tray icon is crushed

Though some of DE, WM or panel application may provide only one icon space per application on system-tray/notification-area, uim-toolbar-gtk-systray displays some icons on it by default so those icons are crushed. Choose just one of them to solve it. The steps to display only 'Input mode' icon for example as follows:

  1. Run uim-pref-gtk.
  2. Click 'Toolbar' on 'Group' list.
  3. Take the all checkmarks off.
  4. Click 'Anthy', 'Anthy (UTF-8)' or 'Mozc' which you are using on 'Group' list.
  5. Click Edit button in 'Toolbar' box > 'Enable toolbar buttons' line.
  6. Enable only 'Input mode' and click 'Close' button.
  7. Click 'OK' button to close uim-pref-gtk.

The tray icon will be displayed "あ" (Hiragana mode) or "ー" (Direct mode).

I use darker theme, I cannot read the uim mode icons

You can choose icons for darker background (uim 1.6.0 or later).

  1. Run uim-pref-gtk.
  2. Click 'Toolbar' on 'Group' list.
  3. Check 'Use icon for dark background'.

See also

uim
uim official document
Wikibooks:uim
Fonts
Japanese fonts showcase
modified Japanese fonts