Polkit (Русский)

From ArchWiki
Jump to navigation Jump to search

Tango-preferences-desktop-locale.pngЭта страница нуждается в сопроводителеTango-preferences-desktop-locale.png

Статья не гарантирует актуальность информации. Помогите русскоязычному сообществу поддержкой подобных страниц. См. Команда переводчиков ArchWiki

Выдержка из домашней страницы polkit:

polkit — это средство для управления правами приложений пользовательского уровня, позволяющее непривилегированным процессам решать административные задачи: единый интерфейс предоставления прав доступа к привилегированным операциям для непривилегированных приложений при помощи набора правил (политик) и шины D-Bus.

Polkit используется для управления общесистемными привилегиями. Данный фреймворк используется для предоставления непривилегированным процессам возможность выполнения действий, требующих прав администратора. В отличие от sudo, Polkit не наделяет процесс правами суперпользователя, а позволяет точно контролировать, какие действия разрешены, а какие нет.

Polkit может контролировать отдельные действия, такие как запуск GParted: при этом он проверяет имя пользователя и принадлежность оного к группе, например, является ли он членом группы wheel. Далее Polkit проверяет, какими правами наделены пользователи данной группы (есть ли вообще права на запуск?) и, если всё сходится (пользователь в нужной группе и у группы есть соответствующие права), требует ввести пароль для идентификации пользователя.


Установите пакет polkit.

Агенты аутентификации

Агент аутентификации используется для установления подлинности оператора либо как обычный пользователь (путём ввода пароля пользователя), либо как суперпользователь (путём ввода пароля рута). Пакет polkit содержит текстовый агент аутентификации, 'pkttyagent', который используется в качестве запасного варианта.

Если вы пользуетесь графической оболочкой, убедитесь, что установлен графический агент аутентификации и что он автоматически запускается при входе в систему.

Такие графические оболочки как Cinnamon, Deepin, GNOME, GNOME Flashback, KDE, LXDE, LXQt, MATE, и Xfce уже имеют в своём составе агенты аутентификации. В других графических окружениях вы можете выбрать одну из реализаций:

  • lxqt-policykit, который предоставляет /usr/bin/lxqt-policykit-agent
  • lxsession, который предоставляет /usr/bin/lxpolkit
  • mate-polkit, который предоставляет /usr/lib/mate-polkit/polkit-mate-authentication-agent-1
  • polkit-efl-gitAUR, который предоставляет /usr/bin/polkit-efl-authentication-agent-1
  • polkit-gnome, который предоставляет /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
  • polkit-kde-agent, который предоставляет /usr/lib/polkit-kde/polkit-kde-authentication-agent-1
  • ts-polkitagentAUR, который предоставляет /usr/lib/ts-polkitagent
  • xfce-polkit-gitAUR, который предоставляет /usr/lib/xfce-polkit/xfce-polkit


Warning: Do not amend the default permission files of packages, as these may be be overwritten on package upgrades.

Polkit definitions can be divided into two kinds:

  • Actions are defined in XML .policy files located in /usr/share/polkit-1/actions. Each action has a set of default permissions attached to it (e.g. you need to identify as an administrator to use the GParted action). The defaults can be overruled but editing the actions files is NOT the correct way.
  • Authorization rules are defined in JavaScript .rules files. They are found in two places: 3rd party packages can use /usr/share/polkit-1/rules.d (though few if any do) and /etc/polkit-1/rules.d is for local configuration.

Polkit operates on top of the existing permissions systems in Linux – group membership, administrator status – it does not replace them. The .rules files designate a subset of users, refer to one (or more) of the actions specified in the actions files and determine with what restrictions these actions can be taken by that/those user(s). As an example, a rules file could overrule the default requirement for all users to authenticate as an admin when using GParted, determining that some specific user doesn't need to. Or isn't allowed to use GParted at all.

Note: This does not preclude running GParted by means which do not respect polkit, such as the command line. Therefore, polkit should be used to expand access to privileged services for unprivileged users, rather than try to curtail the rights of (semi-)privileged users. For security purposes, sudoers is still the way to go.


Tip: To display Policykit actions in a graphical interface, install the polkit-explorerAUR package.

The actions available to you via polkit will depend on the packages you have installed. Some are used in multiple desktop environments (org.freedesktop.*), some are DE-specific (org.gnome.*) and some are specific to a single program (org.archlinux.pkexec.gparted.policy). The command pkaction lists all the actions defined in /usr/share/polkit-1/actions for quick reference.

To get an idea of what polkit can do, here are a few commonly used groups of actions:

  • systemd-logind (org.freedesktop.login1.policy) actions regulated by polkit include powering off, rebooting, suspending and hibernating the system, including when other users may still be logged in.
  • udisks (org.freedesktop.udisks2.policy) actions regulated by polkit include mounting file systems and unlocking encrypted devices.
  • NetworkManager (org.freedesktop.NetworkManager.policy) actions regulated by polkit include turning on and off the network, wifi or mobile broadband.

Each action is defined in an <action> tag in a .policy file. The org.archlinux.pkexec.gparted.policy contains a single action and looks like this:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE policyconfig PUBLIC
 "-//freedesktop//DTD PolicyKit Policy Configuration 1.0//EN"

  <action id="org.archlinux.pkexec.gparted">
    <message>Authentication is required to run the GParted Partition Editor</message>
    <annotate key="org.freedesktop.policykit.exec.path">/usr/bin/gparted</annotate>
    <annotate key="org.freedesktop.policykit.exec.allow_gui">true</annotate>


The attribute id is the actual command sent to D-Bus, the message tag is the explanation to the user when authentication is required and the icon_name is sort of obvious.

The defaults tag is where the permissions or lack thereof are located. It contains three settings: allow_any, allow_inactive, and allow_active. Inactive sessions are generally remote sessions (SSH, VNC, etc.) whereas active sessions are logged directly into the machine on a TTY or an X display. allow_any is the setting encompassing both scenarios.

For each of these settings the following options are available:

  • no: The user is not authorized to carry out the action. There is therefore no need for authentication.
  • yes: The user is authorized to carry out the action without any authentication.
  • auth_self: Authentication is required but the user need not be an administrative user.
  • auth_admin: Authentication as an administrative user is required.
  • auth_self_keep: The same as auth_self but, like sudo, the authorization lasts a few minutes.
  • auth_admin_keep: The same as auth_admin but, like sudo, the authorization lasts a few minutes.

These are default setting and unless overruled in later configuration will be valid for all users.

As can be seen from the GParted action, users are required to authenticate as administrators in order to use GParted, regardless of whether the session is active or inactive.

Правила авторизации

Authorization rules that overrule the default settings are laid out in a set of directories as described above. For all purposes relating to personal configuration of a single system, only /etc/polkit-1/rules.d should be used.

The addRule() method is used for adding a function that may be called whenever an authorization check for action and subject is performed. Functions are called in the order they have been added until one of the functions returns a value. Hence, to add an authorization rule that is processed before other rules, put it in a file in /etc/polkit-1/rules.d with a name that sorts before other rules files, for example 00-early-checks.rules.

The layout of the .rules files is fairly self-explanatory:

/* Allow users in admin group to run GParted without authentication */
polkit.addRule(function(action, subject) {
    if (action.id == "org.archlinux.pkexec.gparted" &&
        subject.isInGroup("admin")) {
        return polkit.Result.YES;

Inside the function, we check for the specified action ID (org.archlinux.pkexec.gparted) and for the user's group (admin), then return a value "yes".

Administrator identities

The addAdminRule() method is used for adding a function that may be called whenever administrator authentication is required. The function is used to specify what identities may be used for administrator authentication for the authorization check identified by action and subject. Functions added are called in the order they have been added until one of the functions returns a value.

The default configuration for administrator identities is contained in the file 50-default.rules so any changes to that configuration should be made by copying the file to, say, 40-default.rules and editing that file.

polkit.addAdminRule(function(action, subject) {
    return ["unix-group:wheel"];

The only part to edit (once copied) is the return array of the function: as whom should a user authenticate when asked to authenticate as an administrative user? If she herself is a member of the group designated as admins, she only need enter her own password. If some other user, e.g. root, is the only admin identity, she would need to enter in root's password. The format of the user identification is the same as the one used in designating authorities.

The Arch default is to make all members of the group wheel administrators. A rule like below will have polkit ask for the root password instead of the users password for Admin authentication.

/* Always authenticate Admins by prompting for the root
 * password, similar to the rootpw option in sudo
polkit.addAdminRule(function(action, subject) {
    return ["unix-user:root"];



The following rule logs detailed information about any requested access.

polkit.addRule(function(action, subject) {
    polkit.log("action=" + action);
    polkit.log("subject=" + subject);

Disable suspend and hibernate

The following rule disables suspend and hibernate for all users.

polkit.addRule(function(action, subject) {
    if (action.id == "org.freedesktop.login1.suspend" ||
        action.id == "org.freedesktop.login1.suspend-multiple-sessions" ||
        action.id == "org.freedesktop.login1.hibernate" ||
        action.id == "org.freedesktop.login1.hibernate-multiple-sessions")
        return polkit.Result.NO;

Bypass password prompt

To achieve something similar to the sudo NOPASSWD option and get authorized solely based on user/group identity, you can create custom rules in /etc/polkit-1/rules.d/. This allows you to override password authentication either only for specific actions or globally. See [1] for an example rule set.


Create the following file as root:

/* Allow members of the wheel group to execute any actions
 * without password authentication, similar to "sudo NOPASSWD:"
polkit.addRule(function(action, subject) {
    if (subject.isInGroup("wheel")) {
        return polkit.Result.YES;

Replace wheel by any group of your preference.

This will result in automatic authentication for any action requiring admin rights via Polkit. As such, be careful with the group you choose to give such rights to.

For specific actions

Create the following file as root:

/* Allow members of the wheel group to execute the defined actions 
 * without password authentication, similar to "sudo NOPASSWD:"
polkit.addRule(function(action, subject) {
    if ((action.id == "org.archlinux.pkexec.gparted" ||
	 action.id == "org.libvirt.unix.manage") &&
        return polkit.Result.YES;

The action.ids selected here are just (working) examples for GParted and Libvirt, but you can replace them by any other of your liking as long as they exist (custom made or supplied by a package), and so can you define any group instead of wheel.

The || operator is used to delimit actions (logical OR), and && means logical AND and must be kept as the last operator.


File managers may ask for a password when trying to mount a storage device, or yield a Not authorized or similar error. See Udisks#Configuration for details.

Allow management of individual systemd units by regular users

By checking for certain values passed to the polkit policy check, you can give specific users or groups the ability to manage specific units. As an example, you might want regular users to start and stop wpa_supplicant:

polkit.addRule(function(action, subject) {
    if (action.id == "org.freedesktop.systemd1.manage-units") {
        if (action.lookup("unit") == "wpa_supplicant.service") {
            var verb = action.lookup("verb");
            if (verb == "start" || verb == "stop" || verb == "restart") {
                return polkit.Result.YES;

See also