Disk cloning

From ArchWiki

Disk cloning is the process of making an image of a partition or of an entire hard drive. This can be useful for copying the drive to other computers or for backup and recovery purposes.

Tip: Over time file systems get new features and the mkfs utilities change their defaults, but not all new features can be enabled without reformatting. So, when moving data to a new drive, instead of cloning the block devices or file systems, consider creating a new file system and only copy the files (and their attributes, ACLs, extended attributes, etc.) with e.g. rsync.

Block-level cloning

Using dd

See dd#Disk cloning and restore.

dd spin-offs

  • dcfldd — enhanced version of dd for forensics and security, with on-the-fly hashing capability helping to ensure integrity, progress status output, flexible disk wipes, bit-for-bit match verification between input and target, output to multiple files or disks at the same time, split output and piped output and logs. The latest official version was released in 2006, but a semiofficial continuation has been releasing updates between 2019 and 2021.
http://dcfldd.sourceforge.net || dcflddAUR
  • dc3dd — another patched version of GNU dd from the United States Department of Defense Cyber Crime Center (DC3), with very similar goals and features to dcfldd. The project aimed at tracking the GNU upstream updated[1], however its last release was in 2016.
https://sourceforge.net/projects/dc3dd/ || dc3ddAUR

Using ddrescue

GNU ddrescue is a data recovery tool capable of ignoring read errors. ddrescue is not related to dd in any way except that both can be used for copying data from one device to another. The key difference is that ddrescue uses a sophisticated algorithm to copy data from failing drives causing them as little additional damage as possible. See the ddrescue manual for details.

To clone a faulty or dying drive, run ddrescue twice. For the first round, copy every block without read error and map the errors to rescue.map.

# ddrescue -n /dev/sdX /dev/sdY rescue.map

where X is the partition letter of the source and Y of the target block device.

For the second round, copy only the bad blocks and try 3 times to read from the source before giving up.

# ddrescue -d -r3 -n /dev/sdX /dev/sdY rescue.map

Now you can check the file system for corruption and mount the new drive.

# fsck -f /dev/sdY

File system cloning

Tango-view-fullscreen.pngThis article or section needs expansion.Tango-view-fullscreen.png

Reason: Add xfs_copy(8). (Discuss in Talk:Disk cloning)

Using e2image

e2image is a tool included in e2fsprogs for debugging purposes. It can be used to copy ext2, ext3, and ext4 partitions efficiently by only copying the used blocks. Note that this only works for ext2, ext3, and ext4 filesystems, and the unused blocks are not copied so this may not be a useful tool if one is hoping to recover deleted files.

To clone a partition from physical disk /dev/sda, partition 1, to physical disk /dev/sdb, partition 1 with e2image, run

# e2image -ra -p /dev/sda1 /dev/sdb1
Tip: GParted uses e2image to efficiently copy ext2/3/4 partitions.

Versatile cloning solutions

These applications allow easy backup of entire filesystems and recovery in case of failure, usually in the form of a Live CD or USB drive. They contain complete system images from one or more specific points in time and are frequently used to record known good configurations. See Wikipedia:Comparison of disk cloning software for their comparison.

See also Synchronization and backup programs for other applications that can take full system snapshots, among other functionality.

  • Clonezilla — A partition and disk imaging/cloning program which helps with system deployment, bare metal backup and recovery.
    • Complete backup and recovery solution: able to image and restore entire drives including boot sector, bootloader, partition table... for different operating systems including Windows
    • Supports BIOS and UEFI, MBR and GPT
    • Supports most filesystems (ext2-3-4, reiserfs, reiser4, xfs, jfs, btrfs, f2fs, FAT12-16-32, NTFS, HFS+, UFS and others) and LVM2
    • Free-space aware when using Partclone (default), Partimage (optional), ntfsclone (optional), otherwise falls back to dd for block-level copying (dm-crypt/LUKS containers, unsupported filesystems...)
    • Supports multi-threaded compression with different formats (including zstd) and levels
    • Supports encrypting the backup
    • Multicasting server to restore to many machines at once
    • Dedicated LiveCD available to boot from CD, USB drive or PXE server
    • Included on the Arch Linux installation media.
https://clonezilla.org/ || clonezilla
  • Deepin Clone — Tool by Deepin to backup and restore. It supports to clone, backup and restore disk or partition.
https://www.deepin.org/en/original/deepin-clone/ || deepin-clone
  • FSArchiver — A safe and flexible file-system backup/deployment tool
    • Support for basic and extended file attributes
    • Support for basic file-system attributes (label, uuid, block-size) for all linux file-systems
    • Support for multiple file-systems per archive
    • Support for all major Linux filesystems (extfs, xfs, btrfs, reiserfs, etc) and FAT (in order to backup/restore EFI System Partitions)
    • Experimental support for cloning ntfs filesystems
    • Checksumming of everything which is written in the archive (headers, data blocks, whole files)
    • Ability to restore an archive which is corrupt (it will just skip the current file)
    • Multi-threaded lzo, lz4, gzip, bzip2, xz/lzma and zstd compression
    • Support for splitting large archives into several files with a fixed maximum size
    • Encryption of the archive using a password. Based on blowfish from libgcrypt
    • Support for restoring to a bigger or smaller partition (as long as there is enough space to store the data)
    • Support for exclusion patterns to filter what is archived/restored
    • Works with directories (creating a compressed and checksummed tarball of sorts)
    • Included on the Arch Linux installation media
https://www.fsarchiver.org/ || fsarchiver
  • Mondo Rescue — A disaster recovery solution to create backup media that can be used to redeploy the damaged system.
    • Image-based backups, supporting Linux/Windows.
    • Compression rate is adjustable.
    • Can backup live systems (without having to halt it).
    • Can split image over many files.
    • Supports booting to a Live CD to perform a full restore.
    • Can backup/restore over NFS, from CDs, tape drives and other media.
    • Can verify backups.
http://www.mondorescue.org/ || mondoAUR
  • Partclone — A tool that can be used to back up and restore a partition while considering only used blocks.
    • Supports ext2, ext3, ext4, hfs+, reiserfs, reiser4, btrfs, vmfs3, vmfs5, xfs, jfs, ufs, ntfs, fat(12/16/32), exfat, f2fs, nilfs
    • Supports pipe, stdin and stdout to script special features (compression, encryption...)
    • Rescue mode tries to skip bad blocks and backup only good blocks, option to create GNU Ddrescue domain log file from source device
    • ncurses interface available
    • All backed-up blocks are checksummed with crc32
    • Included on the Arch Linux installation media
https://partclone.org/ || partclone
  • Partimage — An ncurses disk cloning utility for Linux/UNIX environments.
    • Has a Live CD.
    • Supports the most popular filesystems on Linux, Windows and Mac OS.
    • Compression.
    • Saving to multiple CDs or DVDs or across a network using Samba/NFS.
    • Development stopped in favor of FSArchiver.
https://www.partimage.org || partimage
  • Redo Backup and Recovery — A backup and disaster recovery application that runs from a bootable Linux CD image.
    • Is capable of bare-metal backup and recovery of disk partitions.
    • Uses xPUD and Partclone for the backend.
http://www.redobackup.org/ ||
  • System Tar & Restore — Backup and Restore your system using tar or Transfer it with rsync
    • GUI and CLI interfaces
    • Creates .tar.gz, .tar.bz2, .tar.xz or .tar archives
    • Supports openssl / gpg encryption
    • Uses rsync to transfer a running system
    • Supports Grub2, Syslinux, EFISTUB/efibootmgr and Systemd/bootctl
https://github.com/tritonas00/system-tar-and-restore || system-tar-and-restoreAUR

See also