Open Sound System
The Open Sound System (OSS) is an alternative sound architecture for Unix-like and POSIX-compatible systems. OSS version 3 was the original sound system for Linux, but was superseded by the Advanced Linux Sound Architecture (ALSA) in 2002 when OSS version 4 became proprietary software. OSSv4 became free software again in 2007 when 4Front Technologies released its source code and provided it under the GPL license.
Comparison with ALSA
Some advantages and disadvantages compared to using the Advanced Linux Sound Architecture.
OSS advantages for users
- Native per-application volume control without requiring a sound server atop it.
- Some legacy (i.e. before 2002) cards can have better support.
OSS advantages for developers
- Support for drivers in userspace.
- Cross-platform (OSS runs on BSDs and Solaris).
- Smaller and easier to use API.
ALSA advantages over OSS
- Better support for USB audio devices.
- Support for Bluetooth audio devices.
- Support for AC'97 and HD Audio dial-up soft-modems such as Si3055.
- Better support for MIDI devices.
- Support for suspend.
- Better support for jack detection.
- Better support for modern hardware.
- OSS has experimental output support for USB audio devices, but no input.
- OSS supports MIDI devices with the help of a software synthesizer such as Timidity or FluidSynth.
Installation
Install the ossAUR package or the package with non-free drivers oss-nonfreeAUR. There is also a development version of OSS available with the oss-gitAUR package.
This will install the OSS, run the OSS install script (temporarily disabling the ALSA modules) and install the OSS kernel modules. Since ALSA is enabled by default, you need to disable it so it does not conflict with OSS. You can do this by blacklisting the soundcore
module.
After blacklisting the module, you can enable oss.service
to start at boot.
To start using OSS without needing to reboot, check if any ALSA modules are still loaded (ALSA modules start with "snd"):
# lsmod | grep snd
Remove the ALSA modules as follows:
# lsmod | awk ' { print $1 } ' | grep snd | xargs rmmod
Then restart OSS:
# soundoff && soundon
To completely remove ALSA from your system, you can compile a custom kernel and disable ALSA in its configuration. See Gentoo:ALSA#Kernel for the details.
In case you are not part of the audio group, add yourself and relogin for the changes to take effect:
# gpasswd -a $USER audio
In case OSS is not able to detect your card when starting it, run:
# ossdetect -v # soundoff && soundon
Testing
Test OSS by running:
$ osstest
You should be able to hear music during the test process. If there is no audio, try to adjust the volume or refer to the #Troubleshooting section.
If you want to hear sounds from more than one application simultaneously, you need vmix
, OSS's software mixer.
Check that vmix is enabled by running:
$ ossmix -a | grep -i vmix
You should see a line like vmix0-enable ON|OFF (currently ON)
. If you do not see any lines beginning with vmix
, it probably means that vmix
has not been attached to your sound device. To attach vmix
, issue the command:
$ vmixctl attach device
where device is your sound device, e.g. /dev/oss/oss_envy240/pcm0
.
To avoid having to issue this command manually in the future, you can add it to /usr/lib/oss/soundon.user
, as suggested by the official documentation.
If you get a "Device or resource busy"
error, you need to add vmix_no_autoattach=1
to /usr/lib/oss/conf/osscore.conf
and then reboot.
See which devices are detected by running:
$ ossinfo
You should be able to see your devices listed under Device Objects or Audio Devices. If the device that you want to use is not at the top of one of these sections, you have to edit /usr/lib/oss/etc/installed_drivers
and place the driver for your device at the very top. It may be required to restart OSS:
# soundoff && soundon
If this does not work, comment all drivers listed except the ones for your device.
Volume control mixer
To control the volume of various devices, mixers levels will need to be set. There are two mixers:
- ossmix
- a command-line mixer, similar to the BSD audio mixer
mixerctl
. - ossxmix
- a GTK-based graphical mixer.
Color definitions
For high definition (HD) audio, ossxmix
will color jack configurations by their pre-defined jack colors:
Color | Type | Connector |
---|---|---|
green | front channels (stereo output) | 3.5mm TRS |
black | rear channels (stereo output) | 3.5mm TRS |
grey | side channels (stereo output) | 3.5mm TRS |
gold | center and subwoofer (dual output) | 3.5mm TRS |
blue | line level (stereo input) | 3.5mm TRS |
pink | microphone (mono input) | 3.5mm TS |
Saving mixer levels
Mixer levels are saved when you shut off your computer. If you want to save the mixer level immediately, execute as root:
# savemixer
savemixer
can be used to write mixer levels to a file with the -f
switch and restore by the -L
switch.
Other mixers
Other mixers that have support for OSS:
- Gnome Volume Control — for GNOME.
- Kmix — for KDE.
Configuring applications for OSS
GStreamer-based
If you have problems with applications that use GStreamer for audio, you can try removing pulseaudio and installing the gst-plugins-good package which is needed by oss4sink
and oss4src
.
OpenAL-based
By default OpenAL uses ALSA. To change this, simply define the usage of OSS in /etc/openal/alsound.conf
:
/etc/openal/alsound.conf
drivers=oss
Audacity
If Audacity starts, but it complains that it cannot open the device or simply does not play anything, then you may be using vmix
which prevents Audacity from having exclusive access to your sound device. To fix this, before running Audacity, run:
$ ossmix vmix0-enable OFF
You can restore vmix
after closing Audacity with:
$ ossmix vmix0-enable ON
Gajim
By default, Gajim uses aplay -q
to play a sound. For OSS you can change it to the equivalent ossplay -qq
by going to Edit > Preferences > Advanced, opening the Advanced Configuration Editor and modifying the soundplayer
variable accordingly.
MOC
To use MOC with OSS v4.1 you must change OSSMixerDevice
to /dev/ossmix
in your configuration file (located in ~/.moc
). For issues with the interface try changing the OSSMixerChannel
by pressing w
in mocp
(to change to the sofware mixer).
MPD
MPD is configured through /etc/mpd.conf
or ~/.mpdconf
. Check both of these files, looking for something that looks like:
/etc/mpd.conf
... audio_output { type "alsa" name "Some Device Name" } ...
If you find an uncommented (the lines do not begin with #'s) ALSA configuration like the one above, comment all of it out, or delete it, and add the following:
/etc/mpd.conf
... audio_output { type "oss" name "My OSS Device" } ...
Further configuration might not be necessary for all users. However, if you experience issues (in that MPD does not work properly after it has been restarted), or if you like having specific (i.e. more user-configured, less auto-configured) configuration files, the audio output for OSS can be more specifically configured by finding the card identifier:
$ ossinfo | grep /dev/dsp
Look for the line that says something similar to /dev/dsp -> /dev/oss/CARD_IDENTIFIER/pcm0
. Take note of what your CARD_IDENTIFIER
is, and add these lines to your OSS audio_output
in your MPD configuration file:
/etc/mpd.conf
... audio_output { type "oss" name "My OSS Device" device "/dev/oss/<SOME_CARD_IDENTIFIER>/pcm0" mixer_device "/dev/oss/<SOME_CARD_IDENTIFIER>/mix0" } ...
See also: Music Player Daemon#System-wide configuration.
MPlayer
If you are using a GUI (SMplayer, GNOME MPlayer, etc.) you can select OSS as the default output in the settings dialogs. If you use MPlayer from the command-line, you should specify the sound output:
$ mplayer -ao oss /some/file/to/play.mkv
If you do not want to bother typing it over and over again add ao=oss
to your configuration file (at ~/.mplayer/config
).
See also: MPlayer#Configuration.
VLC media player
You can select OSS as the default output in the audio settings.
Wine
To set OSS support in Wine start:
$ winecfg
and go to the Audio
tab and select the OSS Driver
.
See also: Wine#Sound.
Other applications
- If you can not get sound from an application not listed here, try looking at the Configuring Applications for OSSv4 page.
- Search for OSS specific packages with pacman or by looking in the AUR.
See also: ossapps.
Tips and tricks
More convenient and precise volume control
The volume lever of ossxmix is very small, making it difficult to finely control the volume.
Run ossmix
to find the control you want to control (refer to ossxmix
), this example is codec1.jack.green.front
.
Bind the following commands to the keyboard shortcuts of the desktop environment.
Increase the volume by 1 (the volume can be between 0 and 100):
$ ossmix codec1.jack.green.front +1
Decrease the volume by 1 (The --
is needed on some systems so that the -1
will not be mistaken for a parameter.):
$ ossmix -- codec1.jack.green.front -1
Then you can easily control the volume.
Keyboard volume control
An easy way to mute/unmute and increase/decrease the volume is to use the ossvol script.
Download the script and place it at /usr/bin/ossvol
.
Once you installed it, type:
$ ossvol -t
to toggle mute, or:
$ ossvol -h
to see the available commands.
ossvol
gives an error like Bad mixer control name(987) 'vol', you need to edit the script and change the CHANNEL
variable to your default channel (usually vmix0-outvol
).If you want to use multimedia keys with ossvol
, map the following commands to your volume keys: XF86AudioRaiseVolume
, XF86AudioLowerVolume
and XF86AudioMute
:
To mute/unmute the volume:
$ ossvol -t
To lower the volume:
$ ossvol -d 2
To raise the volume:
$ ossvol -i 2
Changing the sample rate
Changing the output sample rate is not obvious at first. Sample rates can only be changed by root and vmix
must be unused by any programs when a change is requested. Before you follow any of these steps, ensure you are going through a receiver/amplifier and using quality speakers and not simply computer speakers. If you are only using computer speakers, do not bother changing anything here as you will not notice a difference.
By default the sample rate is 48000hz. There are several conditions in which you may want to change this. This all depends on your usage patterns. You want the sample rate you are using to match the media you use the most. If your computer has to change the sampling rate of the media to suit the hardware it is likely, though not guaranteed, that you will have a loss in audio quality. This is most noticeable in down sampling (ie. 96000hz → 48000hz). There is an article about this issue in Stereophile which was discussed on Apple's CoreAudio API mailing list if you wish to learn more about this issue.
Some example sample rates:
- 44100hz
- Sample rate of standard Red Book audio CDs.
- 88000hz
- Sample rate of SACD high definition audio discs/downloads. It is rare that your motherboard will support this sample rate.
- 96000hz
- Sample rate of most high definition audio downloads. If your motherboard is an AC'97 motherboard, this is likely to be your highest bitrate.
- 192000hz
- Sample rate of BluRay, and some (very few) high definition downloads. Support for external audio receiver equipment is limited to high end audio. Not all motherboards support this. An example of a motherboard chipset that would support this includes HD Audio.
To check what your sample rate is currently set to, run:
$ ossmix | grep rate
You are likely to see vmix0-rate <decimal value> (currently 48000) (Read-only)
.
If you do not see a vmix0-rate
(or vmix1-rate
, etc.) being outputted, then it probably means that vmix
is disabled. In that case, OSS will use the rate requested by the program which uses the device, so this section does not apply. Exception to this are Envy24 (and Envy24HT) cards that have a special setting envy24.rate
which has a similar function (see the oss_envy24
manpage).
To change your sample rate:
- First, make sure your card is able to use the new rate. Run
ossinfo -v2
and see if the wanted rate is in the Native sample rates output. - As root, run
/usr/lib/oss/scripts/killprocs.sh
. Be aware, this will close any program that currently has an open sound channel. - After all programs occupying
vmix
are terminated, run as root:vmixctl rate /dev/dsp 96000
replacing the rate with your desired sample rate (andossmix envy24.rate 96000
if applicable). - Run
ossmix | grep rate
and check forvmix0-rate <decimal value> (currently 96000) (Read-only)
to see if you were successful. - To make the changes permanent add the following to the
soundon.user
file:
/usr/lib/oss/soundon.user
#!/bin/sh vmixctl rate /dev/dsp 96000 # ossmix envy24.rate 96000 # uncomment if you have an Envy24(HT) card exit 0
and make it executable.
Disable virtual mixing and COOKEDMODE to reduce distortion
vmix is a virtual mixer audio that mixes multiple audio streams but can reduce the sound quality. Simply unchecking vmix-things in OSS Mixer GUI does not always work.
Turn off COOKEDMODE
to disable format conversions for all applications and devices.
Edit the following:
/usr/lib/oss/conf/osscore.conf
cooked_enable=0 vmix_disabled=1
Restart oss.service
or your computer ifyou encounter errors.
After that you can still control the volume via ossmix or ossxmix.
A simple system tray applet
For those wanting a very lightweight OSS system tray applet, a simple python version is available as follows:
- Download the script with whatever name you want (e.g.
ossvolctl
) - Make it executable
- And copy it to your
/usr/bin
:# cp ossvolctl /usr/bin/ossvolctl
or:# install -Dm755 ossvolctl /usr/bin/ossvolctl
Start ossxmix docked to the system tray on startup
KDE
Create an application launcher file named ossxmix.desktop
in you local application launchers directory (~/.local/share/applications/
with:
~/.local/share/applications/ossxmix.desktop
[Desktop Entry] Name=Open Sound System Mixer GenericName=Audio Mixer Exec=ossxmix -b Icon=audio-card Categories=Application;GTK;AudioVideo;Player; Terminal=false Type=Application Encoding=UTF-8
To have it autostart with your system, add it to the list in System Settings > System Administration > Startup and Shutdown > Autostart.
GNOME
As root create a file /usr/local/bin/ossxmix_bg
with the following content:
/usr/local/bin/ossxmix_bg
#!/bin/sh exec /usr/bin/ossxmix -b
Then go to System > Preferences > Start Up Applications and:
- Click Add, type
OSSMIX
in the Name field and/usr/local/bin/ossxmix_bg
in Command field then click Add Button. - Login and logout to see the changes.
Record sound output from a program
See upstream article on Recording sound output of a program.
Suspend and hibernation
OSS does not automatically support suspend, it must be manually stopped prior to suspending or hibernating and restarted afterwards.
OSS provides soundon
and soundoff
to enable and disable OSS, although they only stop OSS if all processes that use sound are terminated first.
The following script is a rather basic method of automatically unloading OSS prior to suspending and reloading afterwards.
/usr/lib/systemd/system-sleep/50osssound.sh
#!/bin/sh suspend_osssound() { /usr/lib/oss/scripts/killprocs.sh /usr/bin/soundoff } resume_osssound() { /usr/bin/soundon } case $1 in pre) suspend_osssound ;; post) resume_osssound ;; *) exit $NA ;; esac
Save the contents of this script (as root) into /usr/lib/systemd/system-sleep/50osssound.sh
and make it executable.
With this, all your applications should be fine.
Changing the default sound output
When running osstest
, the first test passes for the first channel, but not for the stereo or right channel, it sounds distorted/hisses. If this is what your sound is like, then it is set to the wrong output.
*** Scanning sound adapter #-1 *** /dev/oss/oss_hdaudio0/pcm0 (audio engine 0): HD Audio play front - Performing audio playback test... <left> OK <right> OK <stereo> OK <measured srate 47991.00 Hz (-0.02%)>
The left sounded good, the right and stereo were the distorted ones.
Let the test continue until you get a working output:
/dev/oss/oss_hdaudio0/spdout0 (audio engine 5): HD Audio play spdif-out - Performing audio playback test... <left> OK <right> OK <stereo> OK <measured srate 47991.00 Hz (-0.02%)>
If this passed the test on all left, right and stereo, proceed to next step.
For the command to change the default output see upstream's wiki article. Change it to what works for you, for example:
# ln -sf /dev/oss/oss_hdaudio0/spdout0 /dev/dsp_multich
For surround sound (4.0-7.1) choose dsp_multich
, for only 2 channels, dsp
is sufficient. See this for all available devices.
ALSA emulation
You can instruct alsa-lib
to use OSS as its audio output system. This works as a sort of ALSA emulation.
Note, however, that this method may introduce additional latency in your sound output, and that the emulation is not complete and does not work with all applications. It does not work, for example, with programs that try to detect devices using ALSA.
So, as most applications support OSS directly, use this method only as a last resort.
In the future, more complete methods may be available for emulating ALSA, such as libsalsa
and cuckoo
.
Instructions
- Install the alsa-plugins package.
- Edit
/etc/asound.conf
as follows.
pcm.oss { type oss device /dev/dsp } pcm.!default { type oss device /dev/dsp } ctl.oss { type oss device /dev/mixer } ctl.!default { type oss device /dev/mixer }
/etc/asound.conf
.Settings for a specific driver
If something is not working, there is a possibility that some of your OSS settings are driver specific or just wrong for your driver.
To solve this:
- Find out which driver is used
$ lspci -vnn | grep -i -A 15 audio
00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03) Subsystem: Hewlett-Packard Company NX6110/NC6120 [103c:099c] Flags: bus master, medium devsel, latency 0, IRQ 21 I/O ports at 2100 [size=256] I/O ports at 2200 [size=64] Memory at d0581000 (32-bit, non-prefetchable) [size=512] Memory at d0582000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: *oss_ich* Kernel modules: snd-intel8x0
- Locate configuration file for device in:
# cd /usr/lib/oss/conf/
- Try changing defaults. There are only few settings, and they are self explanatory
For example, the setting:
ich_jacksense = 1
in oss_ich.conf
turns on jack-sense
(which is responsible for recognizing plugged headphones and muting the speaker). Other settings for jack-sense
can be found in hdaudio.conf
where you have to change the hdaudio_jacksense
variable.
- Restart the
oss.service
for changes take effects.
Troubleshooting
Troubleshooting HD Audio devices
Understanding the problem
If you have a HD Audio sound device, it is very likely that you will have to adjust some mixer settings before your sound works.
HD Audio devices are very powerful in the sense that they can contain a lot of small circuits (called widgets) that can be adjusted by software at any time. These controls are exposed to the mixer, and they can be used, for example, to turn the earphone jack into a sound input jack instead of a sound output jack.
However, there are also bad side effects, mainly because the HD Audio standard is more flexible than it perhaps should be, and because the vendors often only care to get their official drivers working.
When using HD Audio devices, you often find disorganized mixer controls, that do not work at all by default, and you are forced to try every mixer control combination possible, until it works.
Solution
Open ossxmix
and try to change every mixer control in the middle area, that contains the sound card specific controls, as explained in the #Volume control mixer section.
You will probably want to setup a program to record/play continuously in the background (e.g. ossrecord - | ossplay -
for recording or osstest -lV
for playing), while changing mixer settings in ossxmix
in the foreground.
- Raise every volume control slider.
- In each option box, try to change the selected option, trying all the possible combinations.
- If you get noise, try to lower and/or mute some volume controls, until you find the source of the noise.
- Editing
/usr/lib/oss/conf/oss_hdaudio.conf
, uncommenting and changinghdaudio_noskip=0
to a value from 0-7 can give you more jack options inossxmix
.
MMS sound cracking in Totem
If you hear various cracks or strange noises in Totem during playback, you can try using another backend such as FFmpeg. This will not fix the issue that somehow pops up in GStreamer when playing MMS streams but it will give you the option to play it with good sound quality. Playing it in MPlayer is simple:
# mplayer mmsh://yourstreamurl
Microphone playing through output channels
By default, OSS plays back the microphone through the speakers. To disable this in ossxmix find the "Misc" section and uncheck every "input-mix-mute" box.
Add additional HD Audio sound cards support
OSS provides a "generic" codec driver that should be able to parse 99% of all HDAudio codecs.
If the device are not listed in the oss_hdaudio.c
source file, add them to it, recompile and start the drivers.
To find the device/vendor IDs for device type 403, do the following:
$ lspci -vnn | grep Audio
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-H HD Audio [8086:a170] (rev 31)
In this example, "Vendor ID" is "8086" and "Device ID" is "a170".
Change 5 lines of code in the source code, taking "the latest source package"(currently "oss-v4.2-build2020-src-gpl.tar.bz2") as an example:
oss-v4.2-build2020-src-gpl/devlists/Linux
oss_hdaudio pci8086,a170 Intel High Definition Audio (PCH_C)
oss-v4.2-build2020-src-gpl/kernel/drv/oss_hdaudio/.devices
oss_hdaudio pci8086,a170 Intel High Definition Audio (PCH_C)
oss-v4.2-build2020-src-gpl/kernel/drv/oss_hdaudio/oss_hdaudio.c
#define INTEL_DEVICE_PCH_C 0xa170 case INTEL_DEVICE_PCH_C: #Don't add it, it's already there
It is better to modify the existing "Controller" ("PCH_C"
in this example), appending a new line of code may fail. It does not matter if it is PCH_C
.
The last line of code is a bit complicated. This example is an ALC1150 sound card chip. The "Vendor_id" of "ALC1150" is "0x10ec0900", you can get it through a search engine, or try the following:
# cat /sys/class/sound/card0/device/hdaudioC0D0/vendor_id
0x10ec0900
# cat /sys/class/sound/card0/device/sound/card0/hwC0D0/vendor_id
0x10ec0900
For sound card chips of different manufacturers, different paragraphs need to be modified. In the example, the paragraph of Realtek manufacturer:
oss-v4.2-build2020-src-gpl/kernel/drv/oss_hdaudio/hdaudio_codecids.h
{0x10ec0889, "ALC889", VF_ALC88X_HACK, (char **) &alc883remap}, {0x10ec0900, "ALC1150", VF_ALC88X_HACK, (char **) &alc883remap}, {0x10ec0899, "ALC899", VF_ALC88X_HACK, (char **) &alc883remap},
It is very important that on the hardware of this example, modifying the second-to-last line works, but modifying the same code on the first-to-last line fails. You will need to try and modify the same code over and over on different lines to work on your hardware.
For example, try on the 4th last line:
{0x10ec0887, "ALC887", VF_ALC88X_HACK, (char **) &alc883remap}, {0x10ec0900, "ALC1150", VF_ALC88X_HACK, (char **) &alc883remap}, {0x10ec0889, "ALC889", VF_ALC88X_HACK, (char **) &alc883remap}, {0x10ec0892, "ALC892", VF_ALC88X_HACK, (char **) &alc883remap}, {0x10ec0899, "ALC899", VF_ALC88X_HACK, (char **) &alc883remap},
- Dependency packages required for compiling OSS do not need to be installed one by one, the base-devel meta package provides the tools for creating packages.
- You also need to install the toolkit for building kernel modules, which are built during the install phase.