Talk:Arduino
stty
I think we should add option min 1
to stty
command. also i realized that after calling Arduino IDE's terminal icrnl
had changed to -icrnl
. So i suggest we update the command to ::
stty -F /dev/ttyACM0 cs8 9600 ignbrk -brkint -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke noflsh -ixon -crtscts icrnl min 1
Tsester (talk) 10:51, 18 June 2016 (UTC)
Missing tools
Compiling Arduino sketchbooks fails with message: "Parameter 'tools' is mandatory." I compared the arch package to the 64-bit linux download from Arduino (found at https://www.arduino.cc/en/Main/Software) and discovered that the arch package was missing the directory: /usr/share/arduino/hardware/tools. I fixed the compilation error by moving that tools directory from the Arduino download into the correct location. Unsure if I am missing a dependency or the package is broken -- I'm new to Arch.
—This unsigned comment is by Jfmathews (talk) 05:38, 5 January 2017. Please sign your posts with ~~~~!
Installation
I think this should contain to install the arduino-language-server[1]
explanation
I installed arduino-ide and it dropped me the following error code: "Couldn't start client Arduino Language Server".
Followed the call it tries to run: "/usr/lib/arduino-ide/lib/backend/resources/arduino-language-server" what is a symlink to: "/usr/bin/arduino-language-server".
In the "/usr/bin" was no arduino-language-server. So, I installed it via pacman from Extra, after that everything worked. Domp (talk) 00:38, 18 April 2025 (UTC)
Accessing Serial
The subsystem should be tty no? or at least give the instruction how they can find the subsystem if it is not "usb-serial".
I followed the instruction:
/etc/udev/rules.d/01-ttyusb.rules
SUBSYSTEMS=="usb-serial", TAG+="uaccess"
Still I got the unsuficient permission error message.
I ran the "udevadm monitor --property --udev" and connected my board. Where the following came back:
UDEV [1874.351946] add /devices/pci0000:00/0000:00:14.0
/usb2/2-2/2-2:1.0/tty/ttyACM0 (tty)
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/tty
/ttyACM0
SUBSYSTEM=tty
DEVNAME=/dev/ttyACM0
I changed the subsystem to "tty" then everything worked perfectly. Domp (talk) 00:47, 18 April 2025 (UTC)